Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) x⁴ — Method: dividing two powers of the same letter subtracts the index of the divisor from the index of the term being divided. Working: six factors of x on the top and two on the bottom cancel in pairs, leaving 6 − 2 = 4 factors of x. Answer: x⁴. The distractors: x³ comes from dividing the indices, 6 ÷ 2, instead of subtracting them; x⁸ comes from adding the indices, 6 + 2, as though the powers were being multiplied; x¹² comes from multiplying the indices, 6 × 2, as though a power were being raised to a power.
- (c) 0.0479 — Method: round each option to 2 significant figures and check which one gives 0.048. Working: for 0.0479, the first two significant figures are 4 and 7; the next digit is 9, so 7 rounds up to 8, giving 0.048. For 0.0485, the first two significant figures are 4 and 8; the next digit is 5, so 8 rounds up to 9, giving 0.049, not 0.048. 0.052 already has exactly 2 significant figures, 5 and 2, so it stays as 0.052 and does not round to 0.048 at all. 0.04 has only 1 significant figure, so it is already less precise than the 2 significant figures asked for. Answer: 0.0479.
- (d) 1 7/12 — Method: convert both mixed numbers to improper fractions with a common denominator, then subtract. Working: 3 1/4 = 39/12 and 1 2/3 = 20/12, so 39/12 − 20/12 = 19/12 = 1 7/12. Answer: 1 7/12. Chloe's method, subtracting whole numbers (3−1=2) and fraction parts (2/3−1/4=5/12) separately without exchanging, gives 2 5/12. 1 3/4 comes from converting 2/3 to twelfths incorrectly as 6/12 instead of 8/12, then subtracting. 8 comes from converting both mixed numbers to improper fractions correctly (13/4 and 5/3) but then subtracting numerators and denominators separately: (13−5)/(4−3) = 8/1.
- (a) 2.5 × 10⁷ — Method: place the decimal point so that the coefficient is at least 1 and less than 10, then count the places it has moved. Working: the digits give a coefficient of 2.5, and the decimal point travels from the end of 25,000,000 until it sits between the 2 and the 5, a move of 7 places. Answer: 2.5 × 10⁷. The distractors: 25 × 10⁶ is the same area but not in standard form, because the coefficient must be less than 10; 2.5 × 10⁸ comes from counting the eight digits of 25,000,000 instead of the seven places the decimal point moves; 2.5 × 10⁻⁷ comes from making the index negative because the decimal point was carried to the left.
- (b) (60 + 4.5π) cm² — Method: find the area of the rectangle and the area of the semicircle separately, then add them. Working: the rectangle has area 10 × 6 = 60 cm². The semicircle has radius 3 cm, so its area is half of π × 3² = half of 9π = 4.5π cm². Total area = (60 + 4.5π) cm². Answer: (60 + 4.5π) cm². (60 + 18π) cm² comes from using the diameter (6 cm) as the radius in the semicircle area formula: half of π × 6² = 18π. (60 + 9π) cm² comes from forgetting to halve the full circle's area: π × 3² = 9π. (60 + 3π) cm² comes from finding the semicircle's arc length instead of its area: half of 2 × π × 3 = 3π.
- (c) Exactly 1: the subtraction has no rounding at any step. — 10x − x removes the recurring part completely, because the digits after the decimal point in 10x and in x are identical from the tenths place onward, so they cancel exactly: 9.999... − 0.999... = 9.000... = 9. Nothing was rounded to reach 9x = 9, so x = 1 is an exact equality, not an approximation, and the statement that the value is exactly 1, with no rounding at any step, is the correct one. Calling it only approximately 1, on the ground that a recurring decimal can never reach a whole number, misunderstands what the subtraction has just shown: the recurring tail cancels completely, leaving no gap to approximate away. Claiming the method only works because the recurring digit is 9 is also wrong — the same subtraction cancels the recurring part for any repeating digit, not just 9; it is the choice of multiplier (10, matching the one-digit repeat) that makes the cancellation exact, not the digit itself. Saying 10x minus x gives 8.999... rather than 9 misreads the subtraction: 9.999... − 0.999... has no digit to borrow from, since every decimal digit in the two numbers matches, so the result is exactly 9, not 8.999... .
- (b) 2.1 m — The three pieces use 3 × 0.9 = 2.7 m of wood. Remaining wood = 4.8 − 2.7 = 2.1 m. A candidate who miscounts and only subtracts 2 pieces instead of 3 gets 4.8 − 1.8 = 3.0 m. A candidate who adds instead of subtracting gets 4.8 + 2.7 = 7.5 m. A candidate who gives the length used instead of the length remaining gets 2.7 m.
- (d) 60 mph — Average speed = distance ÷ time, with the time measured in hours. 45 minutes is 45/60 of an hour, which is 0.75 of an hour, so the journey takes 1.75 hours. Speed = 105 ÷ 1.75 = 60 mph. 52.5 mph rounds the time up to 2 hours, 72.4 mph writes 1 hour 45 minutes as 1.45 hours, and 183.75 mph multiplies the distance by the time instead of dividing.
- (a) The tape can only give the length to the nearest centimetre — Method: a measurement should never be written to a finer degree of accuracy than the instrument used can read. Working: the tape is marked in centimetres, so the smallest division Leah can read is 1 cm, which is 0.01 m and two decimal places in metres; writing 7.3157 m claims the length to the nearest tenth of a millimetre, four decimal places, which the markings cannot support. A record of 7.32 m, to the nearest centimetre, is what this tape justifies. Answer: The tape can only give the length to the nearest centimetre. The distractors: the nearest millimetre contradicts the markings described in the question, which are centimetres, and would still claim more accuracy than the tape offers; the rule that a length in metres must be written to 2 decimal places borrows the habit of writing money to the penny, when the accuracy of a length depends on the instrument; rounding to the nearest metre would throw away accuracy the tape genuinely provides.
- (c) 25/36 — Method: square a fraction by squaring its numerator and its denominator separately, then add the two results over a common denominator. Working: (2/3)² = 4/9 and (1/2)² = 1/4; the lowest common denominator of 9 and 4 is 36, so 4/9 = 16/36 and 1/4 = 9/36, and 16 + 9 = 25. Answer: 25/36. The distractors: 49/36 comes from adding the two fractions first and squaring the total, giving (7/6)²; 5/13 comes from squaring correctly but then adding the numerators and the denominators, as (4 + 1)/(9 + 4); 7/3 comes from doubling each fraction instead of squaring it, giving 4/3 + 1.
- (d) −1.7 — Since the numbers have different signs, find the difference between their sizes: 4.5 − 2.8 = 1.7, then keep the sign of the number further from zero. So −4.5 + 2.8 = −1.7. A candidate who drops the negative sign gets 1.7. A candidate who adds the magnitudes instead of finding the difference gets −(4.5 + 2.8) = −7.3. A candidate who takes the smaller digit from the larger in the tenths column, doing 8 − 5 = 3 instead of borrowing to make 15 − 8 = 7, gets 2.3 and so −2.3.
- (c) 5/11 — Let x = 0.45 recurring, so x = 0.454545... . Since two digits repeat, multiply by 100: 100x = 45.454545... . Subtracting the original x removes the recurring part exactly, because it lines up digit for digit: 100x − x = 45.454545... − 0.454545... = 45, so 99x = 45, giving x = 45/99 = 5/11. Treating the decimal as if it terminated at two places gives 45/100 = 9/20, which is only 0.45 and drops the repeating part entirely. Subtracting 10x instead of x — using 100x − 10x = 90x = 45 — is the wrong power of ten for a two-digit repeating block, and gives x = 45/90 = 1/2. Making an arithmetic slip in the numerator, 45 − 1 = 44 instead of 45, gives 44/99 = 4/9.
- (a) −108 — Method: a power is worked out before any minus sign written in front of it, while a minus sign inside the brackets is part of the base. Working: (−3)⁴ = 81, because four negative factors multiply to a positive result, so −(−3)⁴ = −81. (−3)³ = −27, because three negative factors multiply to a negative result. Adding gives −81 + (−27) = −108. Answer: −108. The distractors: 54 comes from attaching the leading minus sign to the base, working out (−(−3))⁴ = 81 and then adding −27; −54 comes from taking (−3)³ as +27, forgetting that an odd power keeps the negative sign; 108 comes from believing that any power of a negative number is positive and that the leading minus belongs to the base, giving 81 + 27.
- (a) 7/8, 17/20, 0.8, 78% — Method: convert every value to a decimal, then order the decimals from largest to smallest. Working: 7/8 = 0.875, 17/20 = 0.85, 0.8 = 0.8, 78% = 0.78. Ordering from largest to smallest gives 7/8, 17/20, 0.8, 78%. Answer: 7/8, 17/20, 0.8, 78%. '78%, 0.8, 17/20, 7/8' comes from ordering the converted decimals from smallest to largest instead of largest to smallest. '17/20, 7/8, 0.8, 78%' comes from converting 17/20 incorrectly as larger than 7/8, for example treating 17/20 as 0.87 instead of 0.85, swapping the top two. '7/8, 0.8, 17/20, 78%' comes from converting 17/20 incorrectly as equal to 0.8, swapping the middle two.
- (d) 1050 ml — Convert both amounts to millilitres: 1.8 litres = 1800 ml and 3/4 litre = 750 ml. Subtracting gives 1800 − 750 = 1050 ml. Confusing 3/4 with 75% and converting it as 75 ml instead of 750 ml gives 1800 − 75 = 1725 ml. Adding the amount poured out instead of subtracting it gives 1800 + 750 = 2550 ml. Misreading 1.8 litres as 0.8 litres, losing the whole litre, gives 800 − 750 = 50 ml.
Build your own mix at the worksheet builder.