Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 18 — Method: round each number to the nearest whole number, then square each rounded number and add the results. Working: 2.9 rounds to 3 and 3.1 rounds to 3, so the estimate is 3² + 3² = 9 + 9. Answer: 18. The distractors: 36 comes from adding before squaring, working out (3 + 3)² instead of 3² + 3²; 12 comes from doubling each rounded number instead of squaring it, adding 6 and 6; 6 comes from adding the two rounded numbers and forgetting to square them at all.
- (b) 400 — Method: round each number to the nearest 100, then subtract the rounded values. Working: 812 rounds to 800 (nearest 100) and 397 rounds to 400 (nearest 100). 800 − 400 = 400. Answer: 400. 500 comes from rounding 397 down to 300 instead of up to the nearest 100, 400. 300 comes from rounding 812 down to 700 instead of up to the nearest 100, 800. 415 is the exact value of 812 − 397, found without rounding first, so it is not an estimate — the spreadsheet's answer of 315 is too far from the estimate of 400 to be correct.
- (c) 9/5 — Method: the area of a rectangle is its length multiplied by its width; the decimal product is then written over a power of ten and cancelled. Working: 24 × 75 = 1800, and 2.4 and 0.75 have three decimal places between them, so 2.4 × 0.75 = 1.8; the area of the panel is 1.8 square metres, which is eighteen tenths, so it can be written as 18/10, and dividing the numerator and the denominator by 2 gives 9 over 5. Answer: 9/5. The distractors: 4/5 comes from converting only the digits after the decimal point and losing the whole one, turning 1.8 into eight tenths; 63/20 comes from adding the two sides instead of multiplying them, giving 3.15; 9/50 comes from misplacing the decimal point in the product and writing 0.18, which cancels to 9 over 50.
- (a) the nearest whole number — The error intervals are 23.5 ≤ p < 24.5 and 5.5 ≤ q < 6.5. The minimum of p ÷ q is 23.5 ÷ 6.5 ≈ 3.615, and the maximum is 24.5 ÷ 5.5 ≈ 4.455. Both of these round to 4 at the nearest whole number, so the answer is guaranteed correct to the nearest whole number — but not to the nearest 0.1, since 3.615 rounds to 3.6 while 4.455 rounds to 4.5, which do not agree. Claiming the nearest 0.1 assumes every figure a calculator shows is trustworthy, without checking whether the bounds actually agree that far. Claiming only the nearest 10 badly understates how much can be guaranteed here, since both bounds already round to 4, not merely to 0. Saying no degree of accuracy can be guaranteed gives up before checking whether the bounds agree at any level at all.
- (c) 3 — Method: the index counts how many times the coefficient has been multiplied by 10, which is the number of places the decimal point moves from the end of the number to just after the first significant digit. Working: 2,000 = 2 × 1,000, and 1,000 = 10 × 10 × 10, which is three tens. Answer: 3. The distractors: 4 comes from counting the four digits of 2,000 rather than the three places the decimal point moves; 2 comes from copying the coefficient 2 into the index; −3 comes from making the index negative, which would describe a number smaller than 1 rather than two thousand.
- (b) −0.7 < −0.25 — Method: compare the two negative decimals by their distance from zero on a number line. Working: −0.7 is 0.7 away from zero and −0.25 is 0.25 away from zero, so −0.7 is further from zero in the negative direction, making it the smaller number. Answer: −0.7 < −0.25 is true. "−0.7 > −0.25" comes from comparing 0.7 and 0.25 as if both numbers were positive, ignoring the negative signs. "−0.7 = −0.25" comes from assuming the two numbers are equal because they are both negative decimals. "−0.7 ≥ −0.25" combines the false statement "−0.7 > −0.25" with the false statement "−0.7 = −0.25".
- (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
- (c) 0.001 — Method: a negative index means 'one over' the positive power, so $10^{-3}$ means one over $10^{3}$. Working: ten cubed is 1000, and one over 1000 is 0.001. 1000 comes from ignoring the negative sign and working out ten cubed instead of its reciprocal. −1000 comes from ignoring what the negative index does to the size, while still writing a negative sign on the large value. −0.001 comes from correctly finding the size, 0.001, but wrongly keeping a negative sign because the index was negative. Answer: 0.001.
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (c) 5 × 10⁶ — Method: standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n counts the places the decimal point moves. Working: the digits of 5,000,000 give a coefficient of A = 5, and the decimal point travels from the end of 5,000,000 until it sits just after the 5, a move of 6 places, so n = 6. Answer: 5 × 10⁶. The distractors: 50 × 10⁵ comes from stopping before the coefficient has been brought into range, and 50 is not less than 10, so it is not standard form; 5 × 10⁷ comes from counting the seven digits of 5,000,000 instead of the six places the decimal point moves; 5 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left, when a negative index belongs to a number smaller than 1.
- (b) 14 — Method: the greatest number of identical rows is the highest common factor of the two bulb totals, found by taking every prime factor the two totals share. Working: 42 = 2 × 3 × 7 and 56 = 2 × 2 × 2 × 7, so the prime factors common to both are 2 and 7, giving a highest common factor of 2 × 7 = 14. 2 comes from taking only the common factor 2 and forgetting the common factor 7. 7 comes from taking only the common factor 7 and forgetting the common factor 2. 168 is the lowest common multiple of 42 and 56, not their highest common factor. Answer: 14.
- (a) 2/5 — The ratio 2:3 has 2 + 3 = 5 parts in total, and the larger plot is 3 of those parts. Since the larger plot is 18 m², each part is 18 ÷ 3 = 6 m², so the total area is 5 × 6 = 30 m² and the smaller plot is 2 × 6 = 12 m². The fraction of the total area taken up by the smaller plot is 12/30, which simplifies to 2/5. Giving the fraction for the larger plot instead of the smaller one gives 3/5. Comparing the smaller plot to the larger plot instead of to the total area gives 2/3. Assuming the two plots split the area evenly, ignoring the given ratio altogether, gives 1/2.
- (b) 2² × 3 × 5 — Repeatedly divide 60 by prime numbers: 60 ÷ 2 = 30, 30 ÷ 2 = 15, 15 ÷ 3 = 5, and 5 is itself prime. So 60 is 2 × 2 × 3 × 5, which in index notation is 2² × 3 × 5. Stopping the factor tree after only three divisions and writing 2 × 3 × 5 misses that the 2 divides in twice, and gives only 30, not 60. Squaring the 3 as well as the 2 gives 2² × 3² × 5, which comes to 180, far too big. Squaring the 5 instead of the 2 gives 2 × 3 × 5², which comes to 150, also too big. So 60 = 2² × 3 × 5.
- (a) 11:20 — Method: find the flight time using time = distance ÷ speed, then add this to the departure time. Working: 2340 ÷ 780 = 3 hours; 08:20 + 3 hours = 11:20. Answer: 11:20. 08:40 comes from dividing speed by distance instead of distance by speed, giving a flight time of 1/3 hour (20 minutes) rather than 3 hours. 11:00 comes from adding the 3-hour flight time to the hour of the departure time only, 8 + 3 = 11, and losing the 20 minutes. 03:00 comes from finding the flight time correctly but giving it as a clock time on its own, forgetting to add it to the departure time.
- (d) 636 g — Let x = 0.636363... . Since two digits repeat, multiply by 100: 100x = 63.636363... . Subtracting removes the recurring part exactly: 100x − x = 63.636363... − 0.636363... = 63, so 99x = 63, giving x = 63/99 = 7/11 kg. Converting to grams: 7/11 × 1000 = 7000/11 = 636.3636... g, which rounds to 636 g. Treating the decimal as if it terminated, writing 0.63 as 63/100 kg, gives 630 g when multiplied by 1000 — this drops the recurring part entirely. Subtracting 10x instead of x, using 100x − 10x = 90x = 63, is the wrong power of ten for a two-digit block, giving x = 63/90 = 7/10 kg, which is 700 g. A numerator slip in the subtraction, 63 − 1 = 62 instead of 63, gives x = 62/99 kg, which is 62000/99 = 626.26... g, rounding to 626 g.
Build your own mix at the worksheet builder.