Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) 6 + 2√3 — Multiply √3 by each term in the bracket separately. First term: √3 × 2 = 2√3. Second term: √3 × √12 = √(3 × 12) = √36 = 6. Adding the two results in the order they were found, and writing the whole-number term first, gives 6 + 2√3. Adding the numbers under the root for the second term instead of multiplying them (3 + 12 = 15) gives √15 in place of 6, leading to √15 + 2√3. Multiplying √3 by the 2 but never distributing to the √12 term at all leaves just 2√3. Treating √3 × 2 as if the 3 were multiplied by the 2 inside the root, √3 × 2 → √6, while still getting the second term correct, gives 6 + √6.
- (b) 12 — Method: round the number of pupils to the nearest 10, divide by the number of passengers each minibus can carry, then round up because a part-full minibus still needs a whole vehicle. Working: 179 rounds to 180 (nearest 10); 180 ÷ 16 = 11.25; 11 minibuses only carry 176 passengers, so a 12th minibus is needed for the rest. Answer: 12. 11 comes from rounding 11.25 to the nearest whole number in the usual way, without checking that the leftover pupils still need transporting. 10 comes from rounding 179 down to 170 instead of to the nearest 10, 180. 180 comes from stopping after rounding the number of pupils, without dividing by the number of passengers each minibus carries at all.
- (c) 3 or −5 — Method: a point a fixed distance from another can lie on either side of it, so move the given distance in each direction from the starting point. Working: moving 4 units to the right gives −1 + 4 = 3, and moving 4 units to the left gives −1 − 4 = −5. Answer: 3 or −5. The distractors: 5 or −3 comes from starting at 1 instead of −1, giving 1 + 4 and 1 − 4; 3 only comes from moving to the right and forgetting that the point could lie to the left as well; 4 or −4 comes from measuring the distance from zero instead of from point A, which just repeats the given distance.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (b) (60 + 4.5π) cm² — Method: find the area of the rectangle and the area of the semicircle separately, then add them. Working: the rectangle has area 10 × 6 = 60 cm². The semicircle has radius 3 cm, so its area is half of π × 3² = half of 9π = 4.5π cm². Total area = (60 + 4.5π) cm². Answer: (60 + 4.5π) cm². (60 + 18π) cm² comes from using the diameter (6 cm) as the radius in the semicircle area formula: half of π × 6² = 18π. (60 + 9π) cm² comes from forgetting to halve the full circle's area: π × 3² = 9π. (60 + 3π) cm² comes from finding the semicircle's arc length instead of its area: half of 2 × π × 3 = 3π.
- (a) 18 — Method: round each number to the nearest whole number, then square each rounded number and add the results. Working: 2.9 rounds to 3 and 3.1 rounds to 3, so the estimate is 3² + 3² = 9 + 9. Answer: 18. The distractors: 36 comes from adding before squaring, working out (3 + 3)² instead of 3² + 3²; 12 comes from doubling each rounded number instead of squaring it, adding 6 and 6; 6 comes from adding the two rounded numbers and forgetting to square them at all.
- (c) 360 — There are 5 choices for the letter. The first digit can be any of the 9 digits from 1 to 9, giving 9 choices, and the second digit must differ from the first, leaving 8 choices. By the product rule, the number of PINs is 5 × 9 × 8 = 360. Allowing the second digit to repeat the first, ignoring the 'no digit twice' rule, gives 5 × 9 × 9 = 405. Adding the numbers of choices instead of multiplying them, 5 + 9 + 8, gives 22. Treating the pair of digits as an unordered choice, rather than as a first digit followed by a second digit in a fixed order, halves the digit count: 5 × (9 × 8 ÷ 2) = 180.
- (a) 36 — Method: find the lowest common multiple of 6 and 9, then move up the list of common multiples until one is greater than 20. Working: the common multiples of 6 and 9 are 18, 36, 54 …. 18 is not greater than 20, so the next one, 36, is the smallest value of n that is greater than 20. 18 is the lowest common multiple itself, but it fails the 'greater than 20' condition. 54 is the common multiple after 36, one step too far. 27 is a multiple of 9 but not of 6, since 27 ÷ 6 is not a whole number. Answer: 36.
- (a) to the nearest centimetre — Method: the error interval of a rounded measurement runs from half a unit below the stated value to half a unit above it, so the width of the interval is one whole unit of the accuracy used. Working: the interval runs from 24.5 to 25.5, a width of 25.5 − 24.5 = 1, so the unit of accuracy is 1 cm; the stated value is the midpoint, 25 cm, and 25 correct to the nearest centimetre is exactly what gives 24.5 ≤ L < 25.5. Answer: to the nearest centimetre. To the nearest 0.5 cm comes from reading the half-unit, 0.5, as the accuracy itself instead of doubling it back to the full unit. To 1 decimal place comes from seeing the bounds written with one decimal place and taking that as the accuracy, but the bounds of a value given to 1 decimal place would be only 0.05 either side. To the nearest 10 cm comes from confusing the size of the value, about 25, with the unit it was rounded to; rounding to the nearest 10 cm would give an interval 5 cm either side of the stated value.
- (b) 88.8 — Multiply as whole numbers first, ignoring the decimal point: 37 × 24. Split it as 37 × 20 = 740 and 37 × 4 = 148, so 37 × 24 = 740 + 148 = 888. 3.7 has 1 decimal place and 24 has none, so the answer needs 1 decimal place: 88.8. Counting the 2 digits in "3.7" as though that were the number of decimal places gives 8.88 instead of 1 decimal place. Leaving the decimal point out altogether gives 888. Misreading 37 × 4 as 138 rather than 148 gives a running total of 878, placed with 1 decimal place as 87.8. So 3.7 × 24 = 88.8.
- (c) 7 × 10⁻⁸ — '100 times smaller' means dividing by 100 = 10². Dividing 7 × 10⁻⁶ by 10² means subtracting 2 from the exponent: −6 − 2 = −8, giving 7 × 10⁻⁸. A candidate who multiplied by 100 instead of dividing added 2 to the exponent, getting 7 × 10⁻⁴. A candidate who divided by 10 instead of 100 subtracted only 1 from the exponent, getting 7 × 10⁻⁵. A candidate who did not apply the scale factor at all left the diameter as 7 × 10⁻⁶, the same as the red blood cell.
- (d) 6 — By Pythagoras' theorem, the square of the hypotenuse equals the sum of the squares of the other two sides: (√12)² + (√24)² = 12 + 24 = 36. The hypotenuse is √36 = 6 cm. Adding the two side lengths directly instead of squaring them first, treating the theorem as if it were a straight sum of the sides, gives √12 + √24 = 2√3 + 2√6. Multiplying the two squared values, 12 × 24 = 288, instead of adding them, then taking the root, gives √288 = 12√2. Adding the squares correctly to get 36 but forgetting to take the square root at the end leaves 36 as the answer instead of the hypotenuse itself.
- (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
- (c) 62.35 ≤ r < 62.45 — Method: with a value rounded to 1 decimal place, the error interval reaches half of 0.1 either side. Working: half of 0.1 is 0.05, so the interval runs from 62.4 − 0.05 to 62.4 + 0.05. Answer: 62.35 ≤ r < 62.45. (62 ≤ r < 63 comes from rounding to the nearest whole number instead of 1 decimal place. 62.35 ≤ r ≤ 62.45 comes from including the upper bound with ≤ instead of excluding it with <. 62.3 ≤ r < 62.5 comes from using 0.1 either side instead of half of it.)
- (b) 2² × 3 × 5 — Repeatedly divide 60 by prime numbers: 60 ÷ 2 = 30, 30 ÷ 2 = 15, 15 ÷ 3 = 5, and 5 is itself prime. So 60 is 2 × 2 × 3 × 5, which in index notation is 2² × 3 × 5. Stopping the factor tree after only three divisions and writing 2 × 3 × 5 misses that the 2 divides in twice, and gives only 30, not 60. Squaring the 3 as well as the 2 gives 2² × 3² × 5, which comes to 180, far too big. Squaring the 5 instead of the 2 gives 2 × 3 × 5², which comes to 150, also too big. So 60 = 2² × 3 × 5.
Build your own mix at the worksheet builder.