Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) 12 — Method: division and multiplication have equal priority, so they are carried out in the order they are written, from left to right; a negative divided by a negative is positive. Working: (−36) ÷ (−6) = 6, and then 6 × 2 = 12. Answer: 12. The distractors: 3 comes from carrying out the multiplication first, (−6) × 2 = −12 followed by (−36) ÷ (−12) = 3; −12 comes from treating a negative divided by a negative as negative, giving −6 and then −6 × 2 = −12; 6 comes from stopping at the division and never carrying out the multiplication by 2.
- (d) 6 + 2√3 — Multiply √3 by each term in the bracket separately. First term: √3 × 2 = 2√3. Second term: √3 × √12 = √(3 × 12) = √36 = 6. Adding the two results in the order they were found, and writing the whole-number term first, gives 6 + 2√3. Adding the numbers under the root for the second term instead of multiplying them (3 + 12 = 15) gives √15 in place of 6, leading to √15 + 2√3. Multiplying √3 by the 2 but never distributing to the √12 term at all leaves just 2√3. Treating √3 × 2 as if the 3 were multiplied by the 2 inside the root, √3 × 2 → √6, while still getting the second term correct, gives 6 + √6.
- (c) 23.375 — The error intervals are 7.5 ≤ base < 8.5 and 4.5 ≤ height < 5.5. The upper bound of the area uses the upper bound of both the base and the height, then halves the product: 8.5 × 5.5 ÷ 2 = 23.375 cm². Using the lower bound of both dimensions instead, 7.5 × 4.5 ÷ 2 = 16.875, gives the lower bound of the area rather than the upper one. Multiplying the two upper bounds together but forgetting to halve for the triangle formula, 8.5 × 5.5 = 46.750, treats the triangle as if it were a rectangle. Using the given values directly without applying any bound at all, 8 × 5 ÷ 2 = 20.000, ignores that each rounded measurement has its own range of possible values.
- (b) 30 — Method: the smallest matching total is the lowest common multiple of the two pack sizes. Working: multiples of 6 are 6, 12, 18, 24, 30 …; multiples of 10 are 10, 20, 30 …. The lowest common multiple is 30. 60 comes from working out 6 × 10 = 60, the product of the pack sizes rather than their lowest common multiple. 16 comes from working out 6 + 10 = 16, which is not a common multiple at all. 2 is the highest common factor of 6 and 10, not a total of tickets. Answer: 30.
- (b) 93.9975 — Each measurement was rounded to 1 decimal place, so the error is half of 0.1: length is 12.35 ≤ L < 12.45, and width is 7.45 ≤ W < 7.55. The upper bound for the area comes from multiplying the upper bounds of both dimensions: 12.45 × 7.55 = 93.9975 m². Using the lower bound of both dimensions instead, 12.35 × 7.45 = 92.0075 m², gives the lower bound of the area rather than the upper one. Multiplying the two given rounded values directly, 12.4 × 7.5 = 93, forgets that a rounded measurement is not exact and needs its own error interval. Bounding only the length and leaving the width at its given value, 12.45 × 7.5 = 93.375, misses that the width also has an upper bound of its own.
- (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
- (b) £300 — The increased price is 110% of the original, so the original price = £330 ÷ 1.1 = £300. A candidate who finds 10% of £330 and subtracts it, wrongly treating £330 as the original, gets £330 − £33 = £297. A candidate who adds 10% of £330 again instead of reversing the increase gets £330 + £33 = £363. A candidate who divides by 0.1 instead of 1.1 gets £3,300.
- (c) 87 litres — Work out how much water is drained: 8 × 6 = 48 litres. Subtract this from the starting amount: 120 − 48 = 72 litres. Then add the 15 litres from the hose: 72 + 15 = 87 litres. Subtracting the 15 litres instead of adding it, as though the hose also removed water, gives 120 − 48 − 15 = 57 litres. Stopping after the drain step, without adding the hose water back in, leaves the working at 72 litres. Adding the rate and the time instead of multiplying them, 8 + 6 = 14 litres drained, and then working from there gives 120 − 14 + 15 = 121 litres. So 87 litres of water is left in the tank.
- (a) 4 + √6 — Multiply top and bottom by the conjugate, 4 + √6. The denominator becomes (4 − √6)(4 + √6) = 4² − (√6)² = 16 − 6 = 10. The numerator becomes 10 × (4 + √6) = 40 + 10√6. So the fraction is (40 + 10√6)/10 = 4 + √6, since both terms in the numerator divide by 10. Distributing the conjugate to only the whole-number term of the numerator, and forgetting the surd term entirely, leaves just 4. Rationalising by multiplying the numerator by the conjugate but leaving the ORIGINAL denominator's sign unchanged instead of squaring it lands on 4 − √6, with the surd's sign never actually flipping to positive. Dividing only the whole-number part of the numerator by 10 and forgetting to divide the surd term too leaves 4 + 10√6.
- (b) 6.2 ≤ x < 6.3 — Truncating simply cuts off the digits after the required decimal place instead of rounding them, so every value from 6.2 up to (but not reaching) 6.3 truncates to 6.2. This gives the error interval 6.2 ≤ x < 6.3, with no allowance made on the lower side because truncation never rounds a smaller value up into this interval. Using 6.15 ≤ x < 6.25 applies the rounding rule of going half a unit either side, which does not apply to truncation. Writing 6.1 < x ≤ 6.2 puts the interval below 6.2 instead of above it. Writing 6.2 ≤ x ≤ 6.3 wrongly includes 6.3, which truncates down to itself, not to 6.2.
- (a) 11:20 — Method: find the flight time using time = distance ÷ speed, then add this to the departure time. Working: 2340 ÷ 780 = 3 hours; 08:20 + 3 hours = 11:20. Answer: 11:20. 08:40 comes from dividing speed by distance instead of distance by speed, giving a flight time of 1/3 hour (20 minutes) rather than 3 hours. 11:00 comes from adding the 3-hour flight time to the hour of the departure time only, 8 + 3 = 11, and losing the 20 minutes. 03:00 comes from finding the flight time correctly but giving it as a clock time on its own, forgetting to add it to the departure time.
- (b) 30 — Method: 12% of an amount is 12/100 of it, so find 1% by dividing by 100 and then multiply by 12. Working: 1% of 250 is 250 ÷ 100 = 2.5, and 12% is 2.5 × 12 = 30. Answer: 30 seats. The distractors: 3 comes from writing 12% as 0.012 instead of 0.12, giving 0.012 × 250 = 3; 25 comes from finding 10% of the seats and stopping there; 24 comes from counting 12 seats for each whole hundred, 12 + 12 = 24, and ignoring the remaining 50 seats.
- (a) 2/5 — The ratio 2:3 has 2 + 3 = 5 parts in total, and the larger plot is 3 of those parts. Since the larger plot is 18 m², each part is 18 ÷ 3 = 6 m², so the total area is 5 × 6 = 30 m² and the smaller plot is 2 × 6 = 12 m². The fraction of the total area taken up by the smaller plot is 12/30, which simplifies to 2/5. Giving the fraction for the larger plot instead of the smaller one gives 3/5. Comparing the smaller plot to the larger plot instead of to the total area gives 2/3. Assuming the two plots split the area evenly, ignoring the given ratio altogether, gives 1/2.
- (c) 62.35 ≤ r < 62.45 — Method: with a value rounded to 1 decimal place, the error interval reaches half of 0.1 either side. Working: half of 0.1 is 0.05, so the interval runs from 62.4 − 0.05 to 62.4 + 0.05. Answer: 62.35 ≤ r < 62.45. (62 ≤ r < 63 comes from rounding to the nearest whole number instead of 1 decimal place. 62.35 ≤ r ≤ 62.45 comes from including the upper bound with ≤ instead of excluding it with <. 62.3 ≤ r < 62.5 comes from using 0.1 either side instead of half of it.)
- (a) 8.35 ≤ L < 8.45 — Method: a length rounded to 1 decimal place lies within half of 0.1 cm, that is 0.05 cm, of the value written down. The lower limit is included because it rounds up to that value, and the upper limit is excluded because it rounds up to the next value instead. Working: 8.4 − 0.05 = 8.35 and 8.4 + 0.05 = 8.45, so a length of 8.35 cm still rounds to 8.4 cm while a length of 8.45 cm rounds to 8.5 cm. Answer: 8.35 ≤ L < 8.45. The distractors: 8.3 ≤ L < 8.5 goes a whole 0.1 cm either side instead of half of it; 8.35 < L ≤ 8.45 has the two limits the wrong way round, excluding the length that does round to 8.4 cm and including the one that does not; 8.4 ≤ L < 8.5 is the interval for a length truncated to 1 decimal place, not one rounded to it.
Build your own mix at the worksheet builder.