Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
- (a) 2 × 3² × 5 — Method: divide repeatedly by the smallest prime number until only prime factors remain. Working: 90 ÷ 2 = 45, 45 ÷ 3 = 15, 15 ÷ 3 = 5, and 5 is prime, so 90 = 2 × 3 × 3 × 5, written as 2 × 3² × 5. 2 × 3 × 15 stops before the 15 is broken down into 3 × 5, so it is not fully factorised. 3 × 3 × 10 stops before the 10 is broken down into 2 × 5. 2 × 45 stops after only one division. Answer: 2 × 3² × 5.
- (d) 11 mm — Method: for a square, the side length is the square root of the area. Working: 11 × 11 = 121, so the side length is 11 mm. 60.5 mm comes from working out 121 ÷ 2 = 60.5, halving the area instead of finding its square root. 242 mm comes from working out 121 × 2 = 242, doubling the area instead of finding its square root. 22 mm comes from working out 11 × 2 = 22, doubling the correct side length. Answer: 11 mm.
- (b) 2/5 — The statement compares girls with boys, so girls : boys = 2 : 3. The club is therefore 2 + 3 = 5 equal shares and the girls take 2 of them, so 2/5 of the members are girls. 2/3 repeats the part-to-part fraction the question gives, 3/5 is the fraction that are boys, and 1/3 comes from treating 2/3 as a fraction of the whole club and taking what is left.
- (a) 12 — Method: build the number one place at a time, listing systematically: fix the tens digit, then run through every units digit that is still available. Working: any of the 4 digits can go in the tens place, and once it has been used only 3 digits are left for the units place, so there are 4 × 3 = 12 numbers; listing the numbers that begin with 1 gives 12, 13 and 14, and each of the other three starting digits gives 3 numbers in the same way. Answer: 12. The distractors: 16 comes from working out 4 × 4, which allows a digit to be used twice; 8 comes from multiplying the 4 digits by the 2 places in the number instead of multiplying the choices available at each place; 6 comes from treating a number and its reverse as the same, counting only the unordered pairs of digits.
- (d) x⁴ — Method: dividing two powers of the same letter subtracts the index of the divisor from the index of the term being divided. Working: six factors of x on the top and two on the bottom cancel in pairs, leaving 6 − 2 = 4 factors of x. Answer: x⁴. The distractors: x³ comes from dividing the indices, 6 ÷ 2, instead of subtracting them; x⁸ comes from adding the indices, 6 + 2, as though the powers were being multiplied; x¹² comes from multiplying the indices, 6 × 2, as though a power were being raised to a power.
- (a) 17 — Method: work out each power separately, then combine them as the question asks. Working: $2^3 = 8$ and $3^2 = 9$, and 8 + 9 = 17. 72 comes from working out 8 × 9 = 72, multiplying the two powers instead of adding them. 12 comes from misreading the powers as repeated multiplication of the base by the index, 2 × 3 + 3 × 2 = 6 + 6 = 12. −1 comes from working out 8 − 9 = −1, subtracting the powers instead of adding them. Answer: 17.
- (c) 3/11 — Method: let a letter stand for the recurring decimal, multiply by the power of ten that shifts exactly one repeating block past the point, subtract the original equation so that the recurring tail cancels, then solve and cancel. Working: let x = 0.272727...; the repeating block is two digits long, so multiply by 100 to give 100x = 27.272727...; subtracting gives 99x = 27, so x = 27/99; the highest common factor of 27 and 99 is 9, and 27 ÷ 9 = 3 with 99 ÷ 9 = 11. Answer: 3/11. The distractors: 27/100 comes from writing the repeating block over 100 instead of over 99, forgetting that subtracting x leaves 99x rather than 100x; 3/10 comes from rounding the decimal to one place and converting 0.3; 2/9 comes from treating only the 2 as recurring and converting 0.222... instead.
- (b) 4.05 — Method: line up the decimal points (or place value columns) before adding. Working: 3.60 + 0.45 = 4.05. Answer: 4.05. 3.65 is Priya's answer, from adding the digits without lining up the place value columns, which effectively treats 0.45 as 0.05. 4.5 comes from rounding both numbers up first, 3.6 to 4 and 0.45 to 0.5, and adding those instead of adding the exact values. 0.81 comes from adding the digits 36 and 45 together to get 81, then placing the decimal point in the wrong position.
- (b) 30 — 70 is close to the perfect square 64, so √70 ≈ 8. 65 is close to the perfect cube 64, so ∛65 ≈ 4. Multiplying these estimates: 8 × 4 = 32, which rounds to 30 to 1 significant figure. Estimating ∛65 as 5 instead of 4, perhaps by confusing it with the nearby cube 125 = 5³ rather than the much closer 64 = 4³, and then multiplying by 8, gives 8 × 5 = 40. Adding the two estimates instead of multiplying them, 8 + 4 = 12, rounds to 10 to 1 significant figure. Rounding both estimates up to the next whole number using the wrong nearby power for each, taking √70 as 9 and ∛65 as 5, gives 9 × 5 = 45, which rounds to 50 to 1 significant figure.
- (d) £33.00 — The profit is 3/8 of £24 = (£24 ÷ 8) × 3 = £3 × 3 = £9.00. Selling price = £24 + £9.00 = £33.00. A candidate who gives the profit instead of the selling price gets £9.00. A candidate who subtracts the profit instead of adding it gets £24 − £9 = £15.00. A candidate who works out one eighth of £24 and adds that on, forgetting to multiply by the numerator 3, gets £24 + £3 = £27.00.
- (a) 0 — Method: BIDMAS works through the index first, then the multiplication, then the subtraction. Working: 5² = 25, then 4 × 25 = 100, and finally 100 − 100 = 0. Answer: 0. The distractors: 2400 comes from working from left to right and subtracting first, giving (100 − 4) × 25 = 96 × 25 = 2400; −300 comes from multiplying before applying the index, giving (4 × 5)² = 20² = 400 and then 100 − 400 = −300; 60 comes from reading 5² as 5 × 2 = 10, so that 4 × 10 = 40 and 100 − 40 = 60.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (c) x⁽²⁄³⁾ — Method: a root can be written as a fractional index, with the root's index as the denominator and the power inside the root as the numerator. Working: the cube root gives a denominator of 3 and the square inside gives a numerator of 2, so ∛(x²) = x⁽²⁄³⁾. Answer: x⁽²⁄³⁾. The distractors: x⁽³⁄²⁾ comes from writing the fraction upside down, with the root's index on top; x⁽¹⁄⁶⁾ comes from treating the square as a second root and multiplying 1/3 by 1/2; x⁶ comes from multiplying the root's index by the power, 3 × 2, and keeping the result as a whole-number index.
- (a) 37.5 — The error intervals are 45 ≤ c < 55 and 17.5 ≤ d < 18.5. The maximum possible value of a difference comes from the largest possible value being reduced by the smallest amount: use the upper bound of c together with the LOWER bound of d, since subtracting less gives a bigger result: 55 − 17.5 = 37.5. Using the upper bound for both quantities, 55 − 18.5 = 36.5, forgets that subtracting a bigger number gives a smaller answer, not a bigger one. Using the lower bounds for both, 45 − 17.5 = 27.5, gives the lower bound of the difference instead of the upper one. Using the lower bound of c with the upper bound of d, 45 − 18.5 = 26.5, combines the two bounds the wrong way round entirely.
Build your own mix at the worksheet builder.