Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (b) 25 g — Method: substitute the number of years into the model, raise the fraction to that power first, then multiply by the starting mass. Working: with n = 3 the model gives M = 200 × (1/2)³. Since (1/2)³ = 1/8, the mass is 200 ÷ 8 = 25. Answer: 25 g. The distractors: 12.5 g comes from halving four times instead of three, counting the first weighing as a year; 300 g comes from multiplying by 1/2 × 3 = 1.5 instead of raising 1/2 to the power 3; 0.125 g comes from working out (1/2)³ = 0.125 and stopping there, without multiplying by the starting mass.
- (c) 0.7, 0.72, 3/4 — Method: numbers written in different forms cannot be compared as they stand, so every fraction is turned into a decimal by dividing the numerator by the denominator, and the decimals are then compared place by place from the left. Working: 3/4 means 3 ÷ 4 = 0.75, so the three values to compare are 0.7, 0.75 and 0.72; written to two decimal places they are 0.70, 0.75 and 0.72, and the hundredths digits 0, 5 and 2 put 0.70 first, 0.72 next and 0.75 last; written again in the forms the question used, the order from smallest is 0.7, then 0.72, then 3/4. Answer: 0.7, 0.72, 3/4. The distractors: 3/4, 0.7, 0.72 comes from turning 3/4 into 0.34 by writing the numerator and the denominator as the two digits after the point, which makes the fraction the smallest of the three; 0.72, 3/4, 0.7 comes from the belief that the more digits a decimal has the smaller it must be, which puts both 0.72 and 0.75 below 0.7 and 0.72 below 0.75; 3/4, 0.72, 0.7 comes from comparing the three values correctly but listing them largest first, against an instruction to start with the smallest.
- (b) 364 — Divide in stages using multiples of 12. 12 × 300 = 3600, leaving a remainder of 4368 − 3600 = 768. Then 12 × 64 = 768, so 4368 ÷ 12 = 300 + 64 = 364. Placing the decimal point as though dividing 436.8 by 12 gives 36.4. Transposing the last two digits of 364 gives 346. Working out 768 ÷ 12 as 4 instead of 64, losing the tens digit, and adding 300 + 4 gives 304. So 4368 ÷ 12 = 364.
- (c) > — Method: write both fractions with a common denominator so they can be compared directly. Working: −2/3 = −4/6. Comparing −4/6 and −5/6, −4 is greater than −5, so −4/6 is greater than −5/6. Answer: −2/3 > −5/6, so the symbol is >. < comes from treating the fraction with the larger numerator and denominator, 5/6, as the greater number, ignoring that both fractions are negative. = comes from assuming the fractions must be equal because they look similar in size. ≤ combines < (false) with = (false).
- (b) 63 — 5 + 2 = 7, then 3² = 9, then 7 × 9 = 63. Ignoring the brackets and applying BIDMAS as if the expression were unbracketed gives 3² = 9, then 2 × 9 = 18, then 5 + 18 = 23. Squaring the bracket instead of the 3 gives 7² = 49, then 49 × 3 = 147 — the power belongs to the 3 alone. Multiplying by 3 before squaring the whole product gives 7 × 3 = 21, then 21² = 441.
- (a) 13 °C — Method: subtract the lowest temperature from the highest temperature to find the difference. Working: the highest temperature is 6 °C and the lowest is −7 °C. Difference = 6 − (−7) = 6 + 7 = 13. Answer: 13 °C. 8 °C comes from using −2 °C as the lowest temperature instead of −7 °C: 6 − (−2) = 8. 5 °C comes from finding the difference between the two negative temperatures instead of the highest and lowest: −2 − (−7) = 5. −1 °C comes from adding the highest and lowest temperatures instead of subtracting: 6 + (−7) = −1.
- (b) 18.5 ≤ T < 18.7 — Method: the error interval reaches half the rounding unit either side of the recorded value. Working: half of 0.2 is 0.1, so the interval runs from 18.6 − 0.1 to 18.6 + 0.1. Answer: 18.5 ≤ T < 18.7. (18.4 ≤ T < 18.8 comes from using the full rounding unit, 0.2, either side instead of half of it. 18.5 ≤ T ≤ 18.7 comes from including the upper bound with ≤ instead of excluding it with <. 18.6 ≤ T < 18.8 comes from treating the recorded value as the start of the interval and adding the whole rounding unit, 0.2, above it.)
- (a) The tape can only give the length to the nearest centimetre — Method: a measurement should never be written to a finer degree of accuracy than the instrument used can read. Working: the tape is marked in centimetres, so the smallest division Leah can read is 1 cm, which is 0.01 m and two decimal places in metres; writing 7.3157 m claims the length to the nearest tenth of a millimetre, four decimal places, which the markings cannot support. A record of 7.32 m, to the nearest centimetre, is what this tape justifies. Answer: The tape can only give the length to the nearest centimetre. The distractors: the nearest millimetre contradicts the markings described in the question, which are centimetres, and would still claim more accuracy than the tape offers; the rule that a length in metres must be written to 2 decimal places borrows the habit of writing money to the penny, when the accuracy of a length depends on the instrument; rounding to the nearest metre would throw away accuracy the tape genuinely provides.
- (d) 1 × 10⁻³ — Method: for a number smaller than 1 the index is negative, and it counts the places the decimal point moves to the right to leave a coefficient between 1 and 10. Working: the only significant digit is 1, so the coefficient is 1; the decimal point in 0.001 moves three places to the right to reach that 1, so the index is −3. Answer: 1 × 10⁻³. The distractors: 1 × 10³ comes from taking the index as positive, which describes one thousand grams rather than one thousandth of a gram; 0.1 × 10⁻² is the same mass written with a coefficient of 0.1, which is smaller than 1 and so is not standard form; 1 × 10⁻⁴ comes from counting the zero in front of the decimal point as well as the places after it.
- (d) 1/4 — Method: deal with the fractional index first, then the negative sign. Working: $8^{2/3} = (\sqrt[3]{8})^2 = 2^2 = 4$. A negative index means take the reciprocal of that result, so $8^{-2/3} = \frac{1}{8^{2/3}} = \frac{1}{4}$. Answer: 1/4. A candidate who evaluates $8^{2/3}$ correctly but forgets the negative sign entirely gets 4 — they have dropped the instruction to take a reciprocal. A candidate who takes the reciprocal step but applies it as a sign change to the finished number instead of inverting it gets −4. A candidate who multiplies 8 by −2/3, treating the index as an ordinary factor rather than a power, gets −16/3.
- (c) 2.5 × 10⁶ — Divide the A values: 5 ÷ 2 = 2.5. Subtract the powers of 10: 4 − (−2) = 4 + 2 = 6. So the answer is 2.5 × 10⁶. A candidate who worked out 4 − 2 = 2, treating the subtraction of a negative as an ordinary subtraction, wrote 2.5 × 10². A candidate who subtracted in the wrong order, −2 − 4 = −6, wrote 2.5 × 10⁻⁶. A candidate who multiplied the A values instead of dividing, 5 × 2 = 10, and added the powers, 4 + (−2) = 2, then rewrote 10 × 10² in standard form as 1 × 10³.
- (a) 300 — Method: round each number to 1 significant figure, then divide the rounded values. Working: 8,900 rounds to 9,000 and 29 rounds to 30; cancelling a zero from each gives 900 ÷ 3. Answer: 300. The distractors: 450 comes from rounding 29 down to 20 instead of to the nearest ten, giving 9,000 ÷ 20; 3,000 comes from rounding 29 to 3 rather than to 30, a place-value slip that divides by a number ten times too small; 307 is the exact quotient rounded to the nearest whole number, worked out in full when the question asks for an estimate.
- (c) 150 — Since 90 students represent 3 of the 5 equal parts, one part is 90 ÷ 3 = 30, and the whole year group is five parts: 30 × 5 = 150. Applying the fraction forwards to 90 instead of reversing it, 90 × 3/5 = 54, treats the given number as the whole rather than as three fifths of it. Finding one part correctly as 30 but forgetting to scale up to the whole year group leaves 30 as the final answer. Treating 90 as the whole year group and adding on 2/5 of 90 for the students who do not walk, 90 + (90 × 2/5) = 126, applies the missing fraction to the wrong base amount.
- (a) 6 — Method: the two scoops sit in different places on the cone, so a cone is an ordered choice; the possibilities can be listed systematically or counted by multiplying the choices available at each stage. Working: there are 3 flavours for the bottom scoop, and once that flavour is used only 2 flavours remain for the top scoop, so there are 3 × 2 = 6 cones; listing them confirms this, since vanilla on the bottom allows mango or pistachio on top, mango on the bottom allows vanilla or pistachio, and pistachio on the bottom allows vanilla or mango. Answer: 6. The distractors: 3 comes from treating the two scoops as interchangeable, so that vanilla under mango and mango under vanilla are counted as one cone; 9 comes from allowing the same flavour to be used for both scoops, giving 3 × 3; 5 comes from adding the 3 choices for the bottom scoop to the 2 choices left for the top scoop instead of multiplying them.
- (b) 6.4 × 10⁸ — There are 5 letter positions, each with 23 choices, and 2 digit positions, each with 10 choices, and every position is independent because repeats are allowed. By the product rule, the total is 23⁵ × 10² = 6,436,343 × 100 = 643,634,300, which is 6.4 × 10⁸ to 2 significant figures. Using all 26 letters instead of the 23 that are actually allowed, ignoring the excluded letters entirely, gives 26⁵ × 10² = 1,188,137,600, which is 1.2 × 10⁹ to 2 significant figures. Adding the seven counts of choices instead of multiplying them, 23 + 23 + 10 + 10 + 23 + 23 + 23, gives 135, which is 1.4 × 10² to 2 significant figures — a total far too small for seven independent positions. Swapping which count of choices belongs to letters and which belongs to digits, working out 23² × 10⁵ instead of 23⁵ × 10², gives 52,900,000, which is 5.3 × 10⁷ to 2 significant figures.
Build your own mix at the worksheet builder.