Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) 31 — Method: work out each power separately, remembering that any non-zero base raised to the power 0 is 1 and a base raised to the power 1 is itself, then add the three values. Working: 5⁰ = 1, 5¹ = 5 and 5² = 25, so the total is 1 + 5 + 25 = 31. Answer: 31. The distractors: 30 comes from taking 5⁰ as 0 instead of 1; 35 comes from taking 5⁰ as 5, treating a zero index as leaving the base unchanged; 125 comes from adding the indices first, as though the three terms were being multiplied, and working out 5³.
- (c) 5 × 10⁶ — Method: standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n counts the places the decimal point moves. Working: the digits of 5,000,000 give a coefficient of A = 5, and the decimal point travels from the end of 5,000,000 until it sits just after the 5, a move of 6 places, so n = 6. Answer: 5 × 10⁶. The distractors: 50 × 10⁵ comes from stopping before the coefficient has been brought into range, and 50 is not less than 10, so it is not standard form; 5 × 10⁷ comes from counting the seven digits of 5,000,000 instead of the six places the decimal point moves; 5 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left, when a negative index belongs to a number smaller than 1.
- (d) 2/25 — Method: write the decimal over 100 using its two decimal places, then simplify. Working: 0.08 = 8/100 = 2/25 (dividing both numerator and denominator by 4). Answer: 2/25. The student's fraction, 8/10, comes from ignoring the zero in the tenths column and reading 0.08 as though it were 0.8; it simplifies to 4/5. 1/125 comes from writing the decimal over 1000 instead of 100, as if there were three decimal places. 25/2 comes from flipping the correct fraction upside down.
- (b) 24√2 — The side length of the tile is √72. Since 72 = 36 × 2, √72 = √36 × √2 = 6√2 cm. A square has four equal sides, so the perimeter is 4 × 6√2 = 24√2 cm. Simplifying √72 by writing the perfect-square factor itself as the coefficient instead of its root, 36√2 instead of 6√2, and then multiplying by 4 lands on 144√2. Working out the correct side length, 6√2 cm, but then giving that as the final answer without multiplying by 4 for the perimeter gives 6√2. Doubling the side length instead of quadrupling it, as if the perimeter were 2 × 6√2 rather than 4 × 6√2, gives 12√2.
- (b) 1/9 — Method: let x stand for the recurring decimal, multiply by the power of ten that moves exactly one repeating block past the decimal point, subtract the original equation so that the recurring tail cancels, and solve the equation that is left. Working: let x = 0.111...; the repeating block is one digit long, so multiply by 10 to give 10x = 1.111...; subtracting the first equation from the second gives 10x − x = 1.111... − 0.111..., that is 9x = 1; dividing both sides by 9 gives x = 1/9. Answer: 1/9. The distractors: 1/10 comes from dividing by the multiplier 10 at the last step instead of by the 9 that is left in front of x; 1/11 comes from recalling the elevenths family instead of the ninths, although 1/11 = 0.0909... has a two-digit repeating block rather than a one-digit one; 11/100 comes from stopping the decimal after two digits and converting 0.11 into hundredths.
- (b) 2.1 m — The three pieces use 3 × 0.9 = 2.7 m of wood. Remaining wood = 4.8 − 2.7 = 2.1 m. A candidate who miscounts and only subtracts 2 pieces instead of 3 gets 4.8 − 1.8 = 3.0 m. A candidate who adds instead of subtracting gets 4.8 + 2.7 = 7.5 m. A candidate who gives the length used instead of the length remaining gets 2.7 m.
- (a) 2² × 3 — Method: divide repeatedly by the smallest prime that goes in, until 1 is reached, then write the primes used as a product with indices. Working: 12 ÷ 2 = 6, 6 ÷ 2 = 3 and 3 ÷ 3 = 1, so the primes used are 2, 2 and 3, which is written as 2² × 3. Answer: 2² × 3. The distractors: 2 × 6 comes from stopping at the first factor pair without splitting the 6, which is not prime; 2 × 3 comes from listing each prime once and losing the repeat, and it multiplies to 6 rather than 12; 2 × 3² puts the index on the wrong prime and multiplies to 18.
- (c) −5 — Method: the bracket is worked out first, then the multiplication and the division, which stand as separate parts, and the subtraction that joins them is carried out last; subtracting a negative is the same as adding. Working: (−3) + 5 = 2, so the product is 2 × (−4) = −8; the division gives (−6) ÷ 2 = −3; joining them gives −8 − (−3) = −8 + 3 = −5. Answer: −5. The distractors: −11 comes from taking away 3 instead of taking away −3, giving −8 − 3 = −11; −1 comes from working from left to right once the bracket is done, giving −8 − (−6) = −2 and then −2 ÷ 2 = −1; 11 comes from treating the first product as positive because it was worked out from a bracket, giving 8 − (−3) = 11.
- (c) 3 and 4 — Find the two consecutive fourth powers either side of 200: 3⁴ = 81 and 4⁴ = 256. Since 81 < 200 < 256, ⁴√200 lies between 3 and 4. Answering 14 and 15 comes from taking a square root instead of a fourth root: √200 ≈ 14.14, which does lie between 14 and 15, but that is not the root the question asks for. Answering 5 and 6 comes from taking a cube root instead of a fourth root: ∛200 ≈ 5.85, which lies between 5 and 6. Answering 4 and 5 comes from working 4⁴ as though it were 4 × 4 × 4 = 64 and stopping a factor short, then concluding that 200 is already past 4⁴ and the root must be above 4.
- (a) 120 — For the lowest common multiple, take each prime that appears in either factorisation, raised to the higher power. In 2³ × 3 and 2² × 3 × 5, the prime 2 appears with power 3 in one and power 2 in the other — take the higher, 2³; the prime 3 appears with the same power in both, 3¹; and the prime 5 appears only in the second factorisation, so use 5¹. Multiplying these, 2³ × 3 × 5, gives 120. Taking the lower power of 2 instead of the higher, and leaving out 5 altogether, gives the highest common factor, 12, instead. Multiplying the two original numbers together, 24 × 60, gives 1440, which double-counts every shared prime factor. Assuming the lowest common multiple is simply the larger of the two numbers gives 60, but 60 is not a multiple of 24 — 60 ÷ 24 does not divide exactly. So the lowest common multiple of 24 and 60 is 120.
- (a) x⁶ — Method: work through the powers in order — multiplying powers of the same base means adding indices, and dividing powers of the same base means subtracting indices. Working: first, x⁵ × x³ = x⁸ (adding 5 and 3); then x⁸ ÷ x² = x⁶ (subtracting 2 from 8). x⁴ comes from swapping the two rules — subtracting for the multiplication, 5 − 3 = 2, and then adding for the division, 2 + 2 = 4. x¹⁰ comes from adding all three indices, 5 + 3 + 2 = 10, treating the division the same as a multiplication. 6x comes from correctly reaching a total index of 6 but then writing it as a coefficient of x instead of as its power. Answer: x⁶.
- (d) 24 — Method: the three parts of the deal are chosen independently, so every sandwich can be taken with every snack and every one of those pairs with every drink; the product rule multiplies the number of choices in each part. Working: there are 4 choices of sandwich and each can be taken with any of the 3 snacks, giving 4 × 3 = 12 sandwich-and-snack pairs; each of those pairs can be completed with either of the 2 drinks, so the number of meal deals is 12 × 2 = 24. Answer: 24. The distractors: 9 comes from adding the choices, 4 + 3 + 2, instead of multiplying them, and a candidate who adds writes that total down as the count; 12 comes from multiplying the sandwiches by the snacks and never bringing the drink into the count at all; 27 comes from adding the items on the menu to get 9 and then multiplying that by the 3 parts of the deal, which counts the menu rather than the combinations.
- (d) £6 — First find 30% of £200, which is £60, then find 10% of that: £60 × 0.1 = £6. Adding the two percentages together instead of applying them one after the other, 10% + 30% = 40%, and finding 40% of £200 gives £80. Finding 30% of £200 = £60 correctly but stopping before applying the second percentage leaves £60 as the final answer. Finding only 10% of the original £200, ignoring the 30% entirely, gives £20.
- (c) 12 — Method: division and multiplication have equal priority, so they are carried out in the order they are written, from left to right; a negative divided by a negative is positive. Working: (−36) ÷ (−6) = 6, and then 6 × 2 = 12. Answer: 12. The distractors: 3 comes from carrying out the multiplication first, (−6) × 2 = −12 followed by (−36) ÷ (−12) = 3; −12 comes from treating a negative divided by a negative as negative, giving −6 and then −6 × 2 = −12; 6 comes from stopping at the division and never carrying out the multiplication by 2.
- (b) 25 g — Method: substitute the number of years into the model, raise the fraction to that power first, then multiply by the starting mass. Working: with n = 3 the model gives M = 200 × (1/2)³. Since (1/2)³ = 1/8, the mass is 200 ÷ 8 = 25. Answer: 25 g. The distractors: 12.5 g comes from halving four times instead of three, counting the first weighing as a year; 300 g comes from multiplying by 1/2 × 3 = 1.5 instead of raising 1/2 to the power 3; 0.125 g comes from working out (1/2)³ = 0.125 and stopping there, without multiplying by the starting mass.
Build your own mix at the worksheet builder.