Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (a) 37.5 — The error intervals are 45 ≤ c < 55 and 17.5 ≤ d < 18.5. The maximum possible value of a difference comes from the largest possible value being reduced by the smallest amount: use the upper bound of c together with the LOWER bound of d, since subtracting less gives a bigger result: 55 − 17.5 = 37.5. Using the upper bound for both quantities, 55 − 18.5 = 36.5, forgets that subtracting a bigger number gives a smaller answer, not a bigger one. Using the lower bounds for both, 45 − 17.5 = 27.5, gives the lower bound of the difference instead of the upper one. Using the lower bound of c with the upper bound of d, 45 − 18.5 = 26.5, combines the two bounds the wrong way round entirely.
- (a) 6 × 10² metres — Method: distance = speed × time, so multiply the coefficients and add the indices. Working: 3 × 2 = 6 for the coefficients, and 8 + (−6) = 2 for the indices; 6 lies between 1 and 10, so the coefficient needs no adjustment. Answer: 6 × 10² metres, which is 600 metres. The distractors: 5 × 10² metres comes from adding the coefficients, 3 + 2, instead of multiplying them; 6 × 10¹⁴ metres comes from subtracting the indices, 8 − (−6), which is the rule for dividing rather than for multiplying; 6 × 10⁻⁴⁸ metres comes from multiplying the indices, 8 × (−6), instead of adding them.
- (d) 60 mph — Average speed = distance ÷ time, with the time measured in hours. 45 minutes is 45/60 of an hour, which is 0.75 of an hour, so the journey takes 1.75 hours. Speed = 105 ÷ 1.75 = 60 mph. 52.5 mph rounds the time up to 2 hours, 72.4 mph writes 1 hour 45 minutes as 1.45 hours, and 183.75 mph multiplies the distance by the time instead of dividing.
- (c) 25/36 — Method: square a fraction by squaring its numerator and its denominator separately, then add the two results over a common denominator. Working: (2/3)² = 4/9 and (1/2)² = 1/4; the lowest common denominator of 9 and 4 is 36, so 4/9 = 16/36 and 1/4 = 9/36, and 16 + 9 = 25. Answer: 25/36. The distractors: 49/36 comes from adding the two fractions first and squaring the total, giving (7/6)²; 5/13 comes from squaring correctly but then adding the numerators and the denominators, as (4 + 1)/(9 + 4); 7/3 comes from doubling each fraction instead of squaring it, giving 4/3 + 1.
- (d) 11 mm — Method: for a square, the side length is the square root of the area. Working: 11 × 11 = 121, so the side length is 11 mm. 60.5 mm comes from working out 121 ÷ 2 = 60.5, halving the area instead of finding its square root. 242 mm comes from working out 121 × 2 = 242, doubling the area instead of finding its square root. 22 mm comes from working out 11 × 2 = 22, doubling the correct side length. Answer: 11 mm.
- (b) 0.58333... — Divide 7 by 12 using long division. 70 ÷ 12 = 5 remainder 10, so the first decimal digit is 5. Bring down a 0 to make 100: 100 ÷ 12 = 8 remainder 4, so the second digit is 8. Bring down a 0 to make 40: 40 ÷ 12 = 3 remainder 4, so the third digit is 3. Bring down a 0 to make 40 again — the remainder 4 has reappeared, so the digit 3 repeats forever from here. This gives 7/12 = 0.58333... . Stopping the division after two digits and writing 0.58 treats it as if it terminated, when the remainder is not yet zero. Misreading the pattern as a two-digit repeating block, '58', gives 0.585858..., which wrongly makes the 5 recur as well as the 3. A slip in the long division that carries the wrong remainder forward can make the second digit itself appear to repeat instead of the third, giving 0.588888... .
- (d) 64 — Method: each time the power increases by 1, the value doubles, since one more 2 is multiplied in. Working: 2⁶ = 2⁵ × 2 = 32 × 2 = 64. Answer: 64. (37 comes from adding the power to the value, 32 + 5, instead of multiplying by the base. 192 comes from multiplying 32 by the new power, 6, instead of by the base, 2. 34 comes from adding the base to the value, 32 + 2, instead of multiplying.)
- (c) £384.00 — Adding 20% VAT means multiplying the price by 1.2: £320 × 1.2 = £384.00. Treating the 20% as a flat £20 rather than a percentage of the price, £320 + £20, gives £340.00. Working out the VAT amount alone, £320 × 0.2 = £64.00, and stopping there without adding it back to the original price gives just the VAT, not the total price. Misplacing the decimal point and using 2% instead of 20%, £320 × 1.02, gives £326.40.
- (d) 360 km — Method: first find the kilometres per litre by dividing distance by fuel used, then multiply this rate by the new tank size. Working: 180 ÷ 6 = 30 km per litre; 30 × 12 = 360 km. Answer: 360 km. 30 km comes from finding the correct fuel consumption but stopping there, without scaling it up to the full tank. 2160 km comes from multiplying the original distance (180) by the tank size (12) directly, skipping the unit rate. 90 km comes from pairing the numbers the wrong way round: dividing the distance by the new tank size, 180 ÷ 12 = 15, and then multiplying by the original 6 litres, 15 × 6 = 90.
- (c) 0.7, 0.72, 3/4 — Method: numbers written in different forms cannot be compared as they stand, so every fraction is turned into a decimal by dividing the numerator by the denominator, and the decimals are then compared place by place from the left. Working: 3/4 means 3 ÷ 4 = 0.75, so the three values to compare are 0.7, 0.75 and 0.72; written to two decimal places they are 0.70, 0.75 and 0.72, and the hundredths digits 0, 5 and 2 put 0.70 first, 0.72 next and 0.75 last; written again in the forms the question used, the order from smallest is 0.7, then 0.72, then 3/4. Answer: 0.7, 0.72, 3/4. The distractors: 3/4, 0.7, 0.72 comes from turning 3/4 into 0.34 by writing the numerator and the denominator as the two digits after the point, which makes the fraction the smallest of the three; 0.72, 3/4, 0.7 comes from the belief that the more digits a decimal has the smaller it must be, which puts both 0.72 and 0.75 below 0.7 and 0.72 below 0.75; 3/4, 0.72, 0.7 comes from comparing the three values correctly but listing them largest first, against an instruction to start with the smallest.
- (a) 1/16 — Method: terms can only be subtracted once they share a denominator, so write every term over the largest denominator, 16, and then subtract the numerators in order from left to right. Working: 1 = 16/16, 1/2 = 8/16, 1/4 = 4/16 and 1/8 = 2/16, so the numerators give 16 − 8 − 4 − 2 − 1 = 1, over a denominator of 16. Answer: 1/16. The distractors: 1/8 comes from stopping one term early, after 16 − 8 − 4 − 2 = 2; 3/16 comes from a sign slip on the last term, adding it instead of subtracting it, which gives 2 + 1 = 3; 15/16 comes from working from the right-hand end as though the last four terms were bracketed together, so that only a single sixteenth is taken away from 1.
- (a) 8 — To undo 'multiply by 4, then add 8', reverse the operations in reverse order: subtract 8 first, then divide by 4. 40 − 8 = 32, and 32 ÷ 4 = 8, so the number is 8. A candidate who added 8 again instead of subtracting worked out 40 + 8 = 48, then 48 ÷ 4 = 12. A candidate who divided before subtracting, doing the inverse operations in the wrong order, worked out 40 ÷ 4 = 10, then 10 − 8 = 2. A candidate who multiplied instead of dividing at the last step worked out (40 − 8) × 4 = 32 × 4 = 128.
- (c) 0.001 — Method: a negative index means 'one over' the positive power, so $10^{-3}$ means one over $10^{3}$. Working: ten cubed is 1000, and one over 1000 is 0.001. 1000 comes from ignoring the negative sign and working out ten cubed instead of its reciprocal. −1000 comes from ignoring what the negative index does to the size, while still writing a negative sign on the large value. −0.001 comes from correctly finding the size, 0.001, but wrongly keeping a negative sign because the index was negative. Answer: 0.001.
- (a) 20 — Method: round each number to 1 significant figure, then divide the rounded values. Working: 588 rounds to 600 (1 s.f.) and 31 rounds to 30 (1 s.f.). 600 ÷ 30 = 20. Answer: 20. 17 comes from cutting 588 down to 500, keeping the leading digit as it stands instead of rounding it up to 1 significant figure, 600, then dividing by the correctly rounded 30. 200 comes from misreading the rounded divisor 30 as 3, giving 600 ÷ 3 instead of 600 ÷ 30. 19 is the exact value of 588 ÷ 31 rounded to the nearest whole number, found without rounding the numbers first.
- (b) 0.3, 32%, 7/20 — Method: convert every number to a decimal so they can be compared on the same scale. Working: 7/20 = 0.35, 0.3 stays as 0.3, and 32% = 0.32. Comparing 0.3, 0.32 and 0.35 in size gives the order 0.3, then 0.32, then 0.35. Answer: 0.3, 32%, 7/20. 7/20, 32%, 0.3 lists the numbers from largest to smallest instead of smallest to largest. 0.3, 7/20, 32% swaps 32% and 7/20, treating the fraction 7/20 as smaller even though 7/20 = 0.35 is bigger than 32% = 0.32. 32%, 0.3, 7/20 comes from moving the digits one place too far when converting the percentage, giving 0.032 instead of 0.32, which makes 32% look far smaller than it really is.
Build your own mix at the worksheet builder.