Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) 5 × 10⁶ — Method: standard form is written as A × 10ⁿ, where A is at least 1 and less than 10 and n counts the places the decimal point moves. Working: the digits of 5,000,000 give a coefficient of A = 5, and the decimal point travels from the end of 5,000,000 until it sits just after the 5, a move of 6 places, so n = 6. Answer: 5 × 10⁶. The distractors: 50 × 10⁵ comes from stopping before the coefficient has been brought into range, and 50 is not less than 10, so it is not standard form; 5 × 10⁷ comes from counting the seven digits of 5,000,000 instead of the six places the decimal point moves; 5 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left, when a negative index belongs to a number smaller than 1.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (b) 4.05 — Method: line up the decimal points (or place value columns) before adding. Working: 3.60 + 0.45 = 4.05. Answer: 4.05. 3.65 is Priya's answer, from adding the digits without lining up the place value columns, which effectively treats 0.45 as 0.05. 4.5 comes from rounding both numbers up first, 3.6 to 4 and 0.45 to 0.5, and adding those instead of adding the exact values. 0.81 comes from adding the digits 36 and 45 together to get 81, then placing the decimal point in the wrong position.
- (c) 693 — Method: multiplying a bracket by a number multiplies every term inside it, so 7 × (100 − 1) = 7 × 100 − 7 × 1. Working: 7 × 100 = 700 and 7 × 1 = 7, so the calculation becomes 700 − 7 = 693. Answer: 693. The distractors: 699 comes from subtracting the 1 itself rather than 7 lots of it, giving 700 − 1 = 699; 707 comes from adding the second product instead of subtracting it, giving 700 + 7 = 707; 700 comes from rounding 99 up to 100 and then offering the estimate 7 × 100 as an exact value.
- (a) 71 — 2.9⁴ = (2.9²)². First, 2.9² = 8.41. Then square that: 8.41² = 70.7281, since 841² = 707281 and the decimal point moves four places. To 2 significant figures this rounds to 71, because the figure after the first two significant figures (7 and 0) is a 7, which rounds the 0 up to 1. Rounding the working down instead of up — taking 70.7281 to 70 — ignores that the next figure is 5 or more. Rounding 2.9 up to 3 before doing any working at all, then computing 3⁴ = 81, uses a much cruder approximation and overshoots the true value. Rounding 8.41 all the way down to 8 before squaring, 8² = 64, rounds far too aggressively and loses the accuracy needed for 2 significant figures.
- (a) 7 — Method: BIDMAS deals with the index first, then the multiplication, then the subtraction. Working: (−2)² = (−2) × (−2) = 4, then 3 × 4 = 12, and finally 12 − 5 = 7. Answer: 7. The distractors: −17 comes from squaring only the 2 and keeping the minus sign, giving 3 × (−4) = −12 and then −12 − 5 = −17; 31 comes from multiplying before applying the index, giving (3 × (−2))² = (−6)² = 36 and then 36 − 5 = 31; −3 comes from carrying out the subtraction before the multiplication, giving 3 × (4 − 5) = 3 × (−1) = −3.
- (a) 4 + √6 — Multiply top and bottom by the conjugate, 4 + √6. The denominator becomes (4 − √6)(4 + √6) = 4² − (√6)² = 16 − 6 = 10. The numerator becomes 10 × (4 + √6) = 40 + 10√6. So the fraction is (40 + 10√6)/10 = 4 + √6, since both terms in the numerator divide by 10. Distributing the conjugate to only the whole-number term of the numerator, and forgetting the surd term entirely, leaves just 4. Rationalising by multiplying the numerator by the conjugate but leaving the ORIGINAL denominator's sign unchanged instead of squaring it lands on 4 − √6, with the surd's sign never actually flipping to positive. Dividing only the whole-number part of the numerator by 10 and forgetting to divide the surd term too leaves 4 + 10√6.
- (c) 0.0479 — Method: round each option to 2 significant figures and check which one gives 0.048. Working: for 0.0479, the first two significant figures are 4 and 7; the next digit is 9, so 7 rounds up to 8, giving 0.048. For 0.0485, the first two significant figures are 4 and 8; the next digit is 5, so 8 rounds up to 9, giving 0.049, not 0.048. 0.052 already has exactly 2 significant figures, 5 and 2, so it stays as 0.052 and does not round to 0.048 at all. 0.04 has only 1 significant figure, so it is already less precise than the 2 significant figures asked for. Answer: 0.0479.
- (c) 11 — Method: work out the total number of combinations as if there were no restriction, then subtract the one combination that is not allowed. Working: without any restriction there are 4 backdrops × 3 outfits = 12 combinations. The grey backdrop with the formal suit is not allowed, removing 1 combination: 12 − 1 = 11. Answer: 11. 12 comes from forgetting to remove the combination that is not allowed. 8 comes from removing the entire formal suit outfit from the count instead of just the one combination with the grey backdrop. 10 comes from removing two combinations instead of just the one that is not allowed.
- (a) They cannot both be describing the same path — Jon's measurement means the true length, l, satisfies 11.5 m ≤ l < 12.5 m. Mia's measurement means the true length satisfies 12.55 m ≤ l < 12.65 m. These two ranges do not overlap, so the two measurements cannot both be describing the same path. 'They must both be describing the same path' ignores that the two ranges do not overlap at all. 'Jon's measurement must be wrong' wrongly assumes Jon is the one at fault, when the mismatch does not show which measurement, if either, is wrong. 'Mia's measurement must be wrong' makes the same unjustified assumption in the other direction.
- (b) £37 — One box costs £4 + £3 = £7. Five boxes cost 5 × £7 = £35. Adding the single £2 delivery fee gives £35 + £2 = £37. A candidate who added the £2 delivery fee to each box instead of once for the whole order worked out 5 × (£7 + £2) = 5 × £9 = £45. A candidate who forgot the £3 markup and used the shop's buying price worked out 5 × £4 + £2 = £22. A candidate who added the £3 markup only once, after multiplying the buying price by 5, worked out 5 × £4 + £3 + £2 = £25.
- (b) 5.1 — ∛130 lies between 5 and 6, since 125 < 130 < 216, and closer to 5 because 130 is much nearer 125 than 216. To pin down the first decimal place, test the midpoint of the tenth, 5.05: 5.05³ = 5.05 × 5.05 × 5.05 ≈ 128.79. Since 130 is greater than 128.79, ∛130 lies above 5.05, so it rounds to 5.1 rather than 5.0. Rounding down to 5.0, on the assumption that a value close to the lower bound 125 must round down, ignores that 5.05³ is already less than 130. Estimating 5.2 overshoots the true root: 5.2³ = 140.608, which is well above 130, so ∛130 cannot round to 5.2. Taking 6.0, the upper of the two whole numbers the root lies between, ignores that 130 is far nearer to 5³ = 125 than to 6³ = 216, so the root sits just above 5, not just below 6.
- (a) 120 — There are 6 choices for the first digit. The second digit must be different from the first, leaving 5 choices, and the third digit must differ from both of the first two, leaving 4 choices. By the product rule, the number of codes is 6 × 5 × 4 = 120. Allowing every digit to repeat, ignoring the 'no digit twice' rule entirely, gives 6 × 6 × 6 = 216. Adding the number of choices at each position instead of multiplying them, 6 + 5 + 4, gives 15. Treating the three chosen digits as one unordered set, rather than as digits in a fixed order on the padlock, divides by the 3! = 6 ways of arranging them: 120 ÷ 6 = 20.
- (d) 2 — Method: a fourth root undoes raising to the power 4, so look for the number that gives 16 when it is multiplied by itself four times. Working: 2 × 2 = 4, 4 × 2 = 8 and 8 × 2 = 16, which uses four factors of 2. Answer: 2. The distractors: 4 comes from taking the square root of 16 instead of its fourth root; 8 comes from halving 16, treating any root as a halving; 64 comes from multiplying 16 by 4 instead of taking a fourth root.
- (a) 6 × 10² metres — Method: distance = speed × time, so multiply the coefficients and add the indices. Working: 3 × 2 = 6 for the coefficients, and 8 + (−6) = 2 for the indices; 6 lies between 1 and 10, so the coefficient needs no adjustment. Answer: 6 × 10² metres, which is 600 metres. The distractors: 5 × 10² metres comes from adding the coefficients, 3 + 2, instead of multiplying them; 6 × 10¹⁴ metres comes from subtracting the indices, 8 − (−6), which is the rule for dividing rather than for multiplying; 6 × 10⁻⁴⁸ metres comes from multiplying the indices, 8 × (−6), instead of adding them.
Build your own mix at the worksheet builder.