Printable · GCSE Higher · ages 14-16
Number worksheet — GCSE Higher
Fifteen questions across the number statements at Higher tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Higher
MathsUKwww.geekhero.co.uk
- (c) 6 — 2 × 3 = 6, then 36 ÷ 6 = 6. Ignoring the brackets and working left to right gives 36 ÷ 2 = 18, then 18 × 3 = 54. Multiplying by the bracket instead of dividing by it gives 2 × 3 = 6, then 36 × 6 = 216. Dividing by only the 2 inside the bracket, and ignoring the × 3, gives 36 ÷ 2 = 18.
- (d) 31, which is prime — Method: work out the value, remembering that multiplication comes before addition, then test it for primality by dividing by each prime up to its square root. Working: 2 × 3 × 5 = 30, so the value is 30 + 1 = 31. Since 6² = 36 is larger than 31, only 2, 3 and 5 need testing: 31 is odd, 31 ÷ 3 leaves a remainder of 1, and 31 does not end in 0 or 5. It therefore has exactly two factors, 1 and itself. Answer: 31, which is prime. The distractors: 30, which is not prime comes from working out 2 × 3 × 5 and forgetting to add the 1; the claim that 31 = 1 × 31 makes it non-prime comes from treating any factor pair as proof, forgetting that a prime is allowed the pair 1 and itself; the claim that 31 is a multiple of 3 comes from assuming that a number containing the digit 3 divides by 3, when in fact 31 ÷ 3 leaves a remainder.
- (c) 5 — 0.2 = 1/5, and turning the fraction upside down gives the reciprocal 5/1 = 5. Writing −0.2 mistakes the reciprocal for the negative of the number. Working out 1 − 0.2 = 0.8 mistakes the reciprocal for subtracting the number from 1. Writing 0.5 is the reciprocal of 2, not of 0.2 — a place-value slip that drops the decimal, since 1 ÷ 0.2 = 5 while 1 ÷ 2 = 0.5.
- (a) 0.0069 — Leading zeros are not significant, so the significant figures in 0.006852 start at 6: 6, 8, 5, 2. Rounding to 2 significant figures means keeping 6 and 8, and looking at the next digit, 5, to decide whether to round up. Since 5 rounds up, the second significant figure increases from 8 to 9: 0.006852 rounds to 0.0069. A candidate who rounded to 1 significant figure instead of 2 wrote 0.007. A candidate who rounded to 3 significant figures instead of 2 wrote 0.00685. A candidate who did not round up despite the next digit being 5 wrote 0.0068.
- (d) 6 × 10⁷ — Method: the coefficients and the powers of ten are handled separately — multiply the coefficients, and add the indices because the powers share the base 10. Working: 2 × 3 = 6 for the coefficients, and 10³ × 10⁴ = 10⁷ for the powers; 6 lies between 1 and 10, so the coefficient needs no adjustment. Answer: 6 × 10⁷. The distractors: 5 × 10⁷ comes from adding the coefficients, 2 + 3, instead of multiplying them; 6 × 10¹² comes from multiplying the indices, 3 × 4, instead of adding them; 6 × 10¹ comes from subtracting the indices, 4 − 3, which is the rule for dividing rather than for multiplying.
- (b) No, the true mass could be as high as 852.5 kg — Method: find the upper bound of the true mass and compare it with the weight limit. Working: the display is correct to the nearest 5 kg, so half of 5 kg is 2.5 kg, and the true mass, m kg, satisfies 847.5 ≤ m < 852.5. Part of that interval lies above 850 kg, so the parcels are not definitely within the limit. Answer: the true mass could be as high as 852.5 kg, which is above the limit. ("Yes, the display reads 850 kg, which is not above the limit" compares the limit with the displayed value instead of with the largest value the true mass could take. "Yes, the true mass is at least 847.5 kg and at most 850 kg" uses the correct half unit below but caps the interval at the limit instead of at 852.5 kg. "No, 850 kg on the display rounds up to 855 kg" wrongly treats the displayed value as if it rounds again.)
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (a) 18 minutes — Method: the buses leave together again after a number of minutes that is a multiple of both intervals, and the first such time is the lowest common multiple. Working: the multiples of 6 are 6, 12, 18, 24 … and the multiples of 9 are 9, 18, 27 … The first value in both lists is 18, which is 6 × 3 and 9 × 2. Answer: 18 minutes. The distractors: 54 minutes comes from multiplying 6 by 9, which does give a common multiple but not the lowest one; 3 minutes is the highest common factor of 6 and 9 rather than their lowest common multiple; 15 minutes comes from adding the two intervals together.
- (a) 3 — Method: the fourth root of a number is the positive value that gives that number when it is multiplied by itself four times. Working: 2 × 2 × 2 × 2 = 16, which is too small, and 3 × 3 × 3 × 3 = 9 × 9 = 81. Answer: 3. The distractors: 9 comes from taking the square root of 81 instead of its fourth root; 4.5 comes from taking the square root and then halving it, as though a fourth root were half a square root; 20.25 comes from dividing 81 by 4, treating the root's index as a divisor.
- (d) 12 — Method: if the bracelets are identical and no beads are left over, the number of bracelets must divide exactly into both totals, so it is the highest common factor of 24 and 36. Working: 24 = 2³ × 3 and 36 = 2² × 3²; taking the lower index of each shared prime gives 2² × 3 = 4 × 3 = 12. Each bracelet then has 2 red beads and 3 blue beads. Answer: 12. The distractors: 6 comes from taking each shared prime once rather than at its lower index, giving 2 × 3, which is a common factor but not the highest; 72 is the lowest common multiple of 24 and 36, from taking the higher index of each prime instead of the lower; 60 comes from adding the two bead totals instead of looking for a common factor.
- (a) 8 × 10² — Method: to multiply numbers written in standard form, multiply the coefficients and add the indices. Working: 4 × 2 = 8 for the coefficients, and −3 + 5 = 2 for the indices; 8 already lies between 1 and 10, so no adjustment is needed. Answer: 8 × 10². The distractors: 6 × 10² comes from adding the coefficients, 4 + 2, instead of multiplying them; 8 × 10⁸ comes from ignoring the minus sign and adding 3 + 5; 8 × 10⁻¹⁵ comes from multiplying the indices, −3 × 5, instead of adding them.
- (c) 4 × 10⁻¹ — Multiply the A values: 8 × 5 = 40. Add the powers of 10: −5 + 3 = −2, giving 40 × 10⁻². Since A must satisfy 1 ≤ A < 10, rewrite 40 as 4 × 10¹, so 40 × 10⁻² = 4 × 10¹ × 10⁻² = 4 × 10⁻¹. A candidate who stopped at 40 × 10⁻² did the index arithmetic correctly but left the answer outside standard form, since 40 is not between 1 and 10. A candidate who adjusted the A value to 4 correctly but then took the power of 10 by subtracting the two given powers, −5 − 3 = −8, wrote 4 × 10⁻⁸. A candidate who adjusted the A value to 4 but multiplied the two given powers, −5 × 3 = −15, wrote 4 × 10⁻¹⁵. Both of these forgot that multiplying in standard form means adding the powers.
- (d) 26 and 27 — Find the two consecutive perfect squares either side of 700: 26² = 676 and 27² = 729. Since 676 < 700 < 729, √700 lies between 26 and 27. Answering 7 and 8 comes from stripping the two zeros off 700 and using the 7 itself as the size of the root, instead of comparing 700 with the perfect squares around it — dividing the number under the root by 100 divides the root by 10, so the digits do not simply carry across. Answering 25 and 26 comes from checking 25² = 625, seeing that it is less than 700, and stopping there without also checking the square directly above it. Answering 35 and 36 comes from halving 700 to 350 and then treating that halved value as if it were ten times the true root, drifting into the thirties instead of the twenties.
- (c) 5/8 — Method: write the decimal over 1000 using its three decimal places, then simplify. Working: 0.625 = 625/1000 = 5/8 (dividing both numerator and denominator by 125). Answer: 5/8. 25/4 comes from writing the decimal over 100 instead of 1000, as if there were only two decimal places. 31/50 comes from rounding 0.625 to 0.62 before converting. 8/5 comes from simplifying correctly to 5/8 and then writing the fraction upside down.
- (a) 8.35 ≤ L < 8.45 — Method: a length rounded to 1 decimal place lies within half of 0.1 cm, that is 0.05 cm, of the value written down. The lower limit is included because it rounds up to that value, and the upper limit is excluded because it rounds up to the next value instead. Working: 8.4 − 0.05 = 8.35 and 8.4 + 0.05 = 8.45, so a length of 8.35 cm still rounds to 8.4 cm while a length of 8.45 cm rounds to 8.5 cm. Answer: 8.35 ≤ L < 8.45. The distractors: 8.3 ≤ L < 8.5 goes a whole 0.1 cm either side instead of half of it; 8.35 < L ≤ 8.45 has the two limits the wrong way round, excluding the length that does round to 8.4 cm and including the one that does not; 8.4 ≤ L < 8.5 is the interval for a length truncated to 1 decimal place, not one rounded to it.
Build your own mix at the worksheet builder.