Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- 1.3.4 × 10⁵ is written as an ordinary number. Work out this number.
- 2.A stack of firewood has 3 logs in the top layer. Each layer below has 4 more logs than the layer above it. Work out the number of logs in the 6th layer from the top.
- 3.Write the ratio 4 : 9 in the form 1 : n.
- 4.Two similar triangles have lengths in the ratio 5 : 8. A side of the smaller triangle is 6.5 cm. Work out the length of the corresponding side of the larger triangle.
- 5.A bag contains counters that are red, blue or green only. The probability that a counter taken at random is not red is 0.8. The bag contains 25 counters in total. Work out how many of the counters are red.
- 6.Seven pupils were asked how many books they had read last month. Their answers were 3, 5, 5, 7, 8, 5, 3. Write down the mode.
- 7.Write these decimals in order, starting with the smallest: 0.6, 0.55, 0.601, 0.5, 0.56
- 8.A ball's height, h metres, t seconds after being thrown follows h = (t − 1)(9 − t). Given that the ball is at ground level at t = 1 and t = 9, work out at what time t the ball reaches its maximum height, using symmetry.
- 9.Write the ratio 3/4 : 1/2 as a ratio of whole numbers in its simplest form.
- 10.A parallelogram has a base of 9 cm and a perpendicular height of 6 cm. Work out the area of the parallelogram.
- 11.A fair six-sided dice is rolled 300 times. Work out how many more times you would expect it to land on an even number than on a six.
- 12.A grain of fine sand has a mass of 0.001 grams. Write this mass in standard form.
- 13.A number, n, is tripled and then 4.5 is added. The result is 22.5. Form an equation and solve it to find n.
- 14.The value of a motorbike falls by 12% each year. The motorbike is worth £3200 now. Write down the calculation that gives its value after 3 years.
- 15.A shape is translated by the vector , and one vertex of the image is at the point (1, 6). The original shape is instead translated by the vector . Work out the coordinates of the image of that same vertex under this second translation.
- 16.A cinema has 21 rows of seats with 29 seats in each row. Work out an estimate for the number of people the cinema can hold, by rounding each number to 1 significant figure.
- 17.A rule turns each input x into an output y. The inputs are x = 1, 2, 3, 4 and the matching outputs are y = −5, −3, −1 and one missing value. Work out the missing value of y.
- 18.Write the ratio 0.75 : 2 as a ratio of whole numbers in its simplest form.
- 19.A shop assistant says that 7.2 × 3.9 = 56.16. Work out an estimate for 7.2 × 3.9, by rounding each number to the nearest whole number, to show that the assistant’s answer cannot be correct.
- 20.Work out how many seconds there are in 3 minutes and 20 seconds.
Answer key
- (d) 340,000 — 3.4 × 10⁵ means moving the decimal point in 3.4 five places to the right, giving 340,000. Moving it only four places gives 34,000, one place short. Moving it six places gives 3,400,000, one place too many. Treating the exponent as negative instead of positive moves the point the wrong way, giving 0.000034.
- (a) 23 — The number of logs increases by 4 for each layer down, starting from 3 in the top layer, so the nth layer has 3+(n−1)×4 logs. For the 6th layer: 3+5×4=3+20=23. A candidate who adds the difference of 4 six times instead of five, treating the top layer as needing an addition too, would compute 3+6×4=27. A candidate who uses 4n instead of 4n−1, omitting the adjustment for the first layer, would compute 4×6=24. A candidate who subtracts the common difference, 4, instead of 1 when adjusting the multiplier would compute 4×6−4=20.
- (b) 1 : 2.25 — Method: to write a ratio in the form 1 : n, divide both parts by the first part. Working: 4 ÷ 4 = 1 and 9 ÷ 4 = 2.25, so 4 : 9 = 1 : 2.25. Working out 9 ÷ 4 = 2.25 correctly but then writing it as the first part gives 2.25 : 1, the two parts the wrong way round. Subtracting 9 − 4 = 5 gives 1 : 5, confusing the difference between the parts with the ratio. Multiplying 4 × 9 = 36 gives 1 : 36, confusing the product of the parts with the ratio.
- (a) 10.4 cm — The scale factor from the smaller triangle to the larger triangle is 8 ÷ 5 = 1.6, so the larger side is 6.5 × 1.6 = 10.4 cm. The distractor 4.0625 cm comes from using the ratio the wrong way round, 6.5 × 5 ÷ 8 = 4.0625. The distractor 9.5 cm comes from adding the difference between the ratio numbers (8 − 5 = 3) to the given length, 6.5 + 3 = 9.5. The distractor 13 cm comes from doubling the given length, treating the scale factor as 2 instead of 1.6.
- (d) 5 — Being red and not being red are exhaustive, so their probabilities sum to 1: the probability of red is 1 − 0.8 = 0.2. The number of red counters is 0.2 × 25 = 5. Using 0.8 directly as the probability of red, without taking the complement, gives 0.8 × 25 = 20 — the number of counters that are NOT red. Sharing the 25 counters equally between the three colours, ignoring the given probability altogether, gives 25 ÷ 3 ≈ 8. Misreading the total as 20 counters instead of 25 gives 0.2 × 20 = 4.
- (c) 5 — Method: the mode is the value that occurs most often, so count how many times each different value appears and compare the counts. Working: 3 appears twice, 5 appears three times, 7 appears once and 8 appears once, so the highest frequency is three and the value carrying it is 5. Answer: 5. The distractors: 3 comes from writing down the frequency of the most common answer instead of the answer itself; 7 comes from taking the middle number of the list as it was written, which applies the median without ordering the data and without answering the question asked; 8 comes from picking the largest value, which confuses the mode with the maximum.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (d) t = 5 — The maximum height occurs halfway between the two times when the ball is at ground level: the midpoint of t = 1 and t = 9 is (1 + 9) ÷ 2 = 5, so the ball reaches its maximum height at t = 5 seconds. Getting t = 4 comes from halving the DIFFERENCE between the times, 9 − 1 = 8, then 8 ÷ 2 = 4, instead of finding their midpoint. Getting t = 8 uses that difference, 9 − 1 = 8, as if the gap between the two times were itself the time of the maximum. Getting t = 10 adds the two times, 1 + 9 = 10, but forgets to divide by 2.
- (b) 3:2 — Write both fractions over a common denominator of 4: 3/4 stays as 3/4, and 1/2 = 2/4. Comparing the numerators gives the ratio 3 : 2. Getting 2 : 3 swaps the two parts round. Getting 3 : 1 comes from using the numerator of the first fraction and the original numerator of the second fraction (1) without converting to a common denominator. Getting 2 : 1 comes from using only the denominators, 4 and 2, and simplifying those instead of the numerators.
- (b) 54 cm² — Area of a parallelogram = base × perpendicular height = 9 × 6 = 54 cm². (27 cm² comes from halving the product as if it were a triangle, 1/2 × 9 × 6; 15 cm² comes from adding the base and height instead of multiplying, 9 + 6; 30 cm² comes from doubling the sum of the base and height, as if finding a perimeter, 2 × (9 + 6).)
- (c) 100 — There are 3 even numbers on a fair dice (2, 4 and 6), so the probability of landing on an even number is 3/6 = 1/2, and 300 × 1/2 = 150. The probability of landing on a six is 1/6, so 300 × 1/6 = 50. The dice is expected to land on an even number 150 − 50 = 100 more times than on a six. Writing 50 is wrong because that is just the expected number of sixes on its own, without comparing it to the expected number of evens. Writing 150 is wrong because that is just the expected number of evens on its own, without subtracting the sixes. Writing 200 is wrong because it adds the two expected frequencies together (150 + 50 = 200) instead of finding the difference between them. The dice is expected to land on an even number 100 more times than on a six.
- (d) 1 × 10⁻³ — Method: for a number smaller than 1 the index is negative, and it counts the places the decimal point moves to the right to leave a coefficient between 1 and 10. Working: the only significant digit is 1, so the coefficient is 1; the decimal point in 0.001 moves three places to the right to reach that 1, so the index is −3. Answer: 1 × 10⁻³. The distractors: 1 × 10³ comes from taking the index as positive, which describes one thousand grams rather than one thousandth of a gram; 0.1 × 10⁻² is the same mass written with a coefficient of 0.1, which is smaller than 1 and so is not standard form; 1 × 10⁻⁴ comes from counting the zero in front of the decimal point as well as the places after it.
- (b) 6 — 3n + 4.5 = 22.5, so 3n = 18 and n = 6. A candidate who divides 22.5 by 3 first and ignores the 4.5 gets n = 7.5. A candidate who makes a sign error and forms the equation 3n − 4.5 = 22.5 gets 3n = 27 and n = 9. A candidate who divides by 3 before subtracting the 4.5, working out 22.5 ÷ 3 + 4.5, gets n = 12.
- (d) 3200 × 0.88³ — A fall of 12% leaves 88% of the value, because 100 − 12 = 88, and 88% written as a decimal multiplier is 0.88. Decay repeats that multiplier once for each year, so over 3 years it is applied three times: 0.88 × 0.88 × 0.88, which is written 0.88³. The calculation is therefore 3200 × 0.88³. Adding the percentages to make a single fall of 36% would be wrong, because each year's fall is taken from a smaller value than the year before.
- (d) (11, −2) — First undo the original translation to find the vertex on the original shape: (1 − (−8), 6 − 3) = (9, 3). Then apply the second vector to that original vertex: (9 + 2, 3 + (−5)) = (11, −2). (3, 1) comes from applying the second vector to the image point (1, 6) instead of to the original vertex — (1 + 2, 6 + (−5)) = (3, 1). (7, 8) comes from subtracting the second vector from the original vertex (9, 3) instead of adding it — (9 − 2, 3 − (−5)) = (7, 8). (11, 3) comes from applying only the x-component of the second vector to the original vertex and leaving the y-coordinate unchanged.
- (d) 600 — Method: the number of seats is the number of rows multiplied by the number of seats in each row, so round each number to 1 significant figure and then multiply the rounded values, which is quick because a product of two multiples of ten is found by multiplying the non-zero digits and attaching the zeros. Working: 21 rounds to 20 and 29 rounds to 30; 2 × 3 = 6, and 20 and 30 carry one zero each, so two zeros follow the 6. Answer: about 600 seats. The distractors: 50 comes from adding the two rounded numbers instead of multiplying them, 20 + 30; 60 comes from multiplying 20 by the 3 of 30 and forgetting the zero in 30; 6,000 comes from attaching three zeros to 2 × 3 when 20 and 30 provide only two between them.
- (d) 1 — Method: find the step in the outputs for each step of 1 in the input, write the rule from that step and from one pair of values, then apply the rule to the last input. Working: the outputs −5, −3, −1 rise by 2 while x rises in ones, so x is multiplied by 2; at x = 1, 2 × 1 = 2 while y = −5, so 7 is subtracted, giving y = 2x − 7; at x = 4 the rule gives 2 × 4 = 8 and 8 − 7 = 1. Answer: y = 1. The distractors: 3 comes from carrying the outputs on one step too far, to x = 5; 0 comes from assuming the outputs −5, −3, −1 carry on by adding 1 rather than by adding 2; 8 comes from doubling the input and forgetting to subtract the 7.
- (d) 3 : 8 — Multiply both parts by 4 to clear the decimal: 0.75 × 4 = 3 and 2 × 4 = 8, giving 3 : 8, which has no common factor other than 1. Giving 75 : 200 multiplies by 100 instead of 4, and has not then been simplified down to 3 : 8. Giving 0.75 : 2 has not been converted into whole numbers at all. Giving 3 : 2 converts the first part correctly but leaves the second part unscaled.
- (d) 28 — Method: round each number to the nearest whole number, then multiply the rounded numbers to get an estimate that can be compared with the assistant's answer. Working: 7.2 rounds to 7, and 3.9 rounds to 4, so the estimate is 7 × 4 = 28. Since 28 is much smaller than 56.16, the assistant's answer cannot be correct. 56 comes from rounding the assistant's answer to the nearest whole number, instead of rounding the two numbers being multiplied and then multiplying them. 35 comes from rounding both numbers correctly but then slipping in the seven times table, writing 7 × 5 = 35 in place of 7 × 4 = 28. 21 comes from rounding 3.9 down to 3 instead of 4, giving 7 × 3 = 21. Answer: 28.
- (a) 200 seconds — Method: change the minutes into seconds using 1 minute = 60 seconds, then add on the loose seconds. Working: 3 × 60 = 180, and 180 + 20 = 200. Answer: 200 seconds. The distractors: 320 seconds comes from taking a minute as 100 seconds, giving 300 + 20; 180 seconds comes from converting the 3 minutes and forgetting the extra 20 seconds; 23 seconds comes from adding 3 and 20 without converting the minutes at all.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.