Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (a) −108 — Method: a power is worked out before any minus sign written in front of it, while a minus sign inside the brackets is part of the base. Working: (−3)⁴ = 81, because four negative factors multiply to a positive result, so −(−3)⁴ = −81. (−3)³ = −27, because three negative factors multiply to a negative result. Adding gives −81 + (−27) = −108. Answer: −108. The distractors: 54 comes from attaching the leading minus sign to the base, working out (−(−3))⁴ = 81 and then adding −27; −54 comes from taking (−3)³ as +27, forgetting that an odd power keeps the negative sign; 108 comes from believing that any power of a negative number is positive and that the leading minus belongs to the base, giving 81 + 27.
- (b) 40 — The differences between consecutive terms are 3, 5, 7, 9, increasing by 2 each time, so the next difference is 11, giving 29 + 11 = 40. A candidate who reuses the last difference of 9 without increasing it gets 29 + 9 = 38. A candidate who increases the difference by only 1 instead of 2 gets 29 + 10 = 39. A candidate who reuses the first difference of 3 instead of the pattern gets 29 + 3 = 32.
- (a) 375 g — Find the amount of flour needed per muffin: 150 ÷ 6 = 25 g. Multiply by the new number of muffins: 25 × 15 = 375 g. (60 g comes from using the scale factor the wrong way round, 6/15 × 150. 150 g comes from not scaling the recipe at all. 300 g comes from rounding the scale factor, 15 ÷ 6, down to 2 before multiplying.)
- (c) 100√3 cm — The height is opposite the 60° angle, so height = 2 × sin 60° = 2 × √3/2 = √3 m. Converting to centimetres: √3 m = 100√3 cm. '√3 cm' forgets to convert the answer from metres to centimetres. '200√3 cm' comes from mis-recalling sin 60° as √3 instead of √3/2, dropping the denominator of the exact value: 2 × √3 = 2√3 m = 200√3 cm. '50√3 cm' comes from halving the ladder's length before multiplying by sin 60°, instead of using the full 2 m.
- (c) 90 — Method: over many future trials the expected number of successes is the number of trials multiplied by the probability of a success. Working: the sections are equal, so each is equally likely and P(red) is 3 out of 8. Over 240 spins the expected number of reds is 240 × 3 ÷ 8 = 90. Answer: about 90 of the spins would be expected to land on red. The distractors: 150 uses the 5 sections that are not red, 240 × 5 ÷ 8 = 150, which is the expected number of spins that do not land on red; 30 is 240 ÷ 8 and is the expected count for one single section; 80 comes from dividing by the number of red sections instead of by the number of sections, 240 ÷ 3 = 80.
- (a) Equal means; Class A is more consistent, smaller range. — Method: when two data sets share a measure of location, compare a measure of spread to say more about consistency. Working: both classes have the same mean mark, 14, so on average they performed equally well. Class A has the smaller range, 6, so its marks are more tightly grouped around 14 than Class B's marks, which vary by as much as 14. So Class A's marks were more consistent, even though neither class did better on average. Saying Class B did better because it has the bigger range confuses a wide spread with a high score — a big range describes variability, not performance. Saying Class A did better because it has the smaller range makes the same mistake in the other direction: the two classes are tied on the mean, so neither one 'did better'. Saying the classes cannot be compared because their means are equal misses the whole point of also comparing the range. Always compare both an average AND a spread before describing two data sets — either one alone tells only half the story.
- (d) 13/20 — Method: write both fractions over a common denominator, then add the numerators. Working: 2/5 = 8/20 and 1/4 = 5/20, so 2/5 + 1/4 = 8/20 + 5/20 = 13/20, which is already in its simplest form. Answer: 13/20. 1/3 comes from adding the numerators and the denominators separately: (2+1)/(5+4) = 3/9 = 1/3. 13/40 comes from converting both fractions to twentieths correctly but then adding the denominators as well as the numerators: (8+5)/(20+20) = 13/40. 3/20 comes from adding the original numerators (2+1) but keeping them over the common denominator without converting them first: 3/20.
- (b) 12 — Method: substitute the total cost into the formula, then subtract the fixed cost and divide by the cost per person. Working: 92 = 6p + 20, so 6p = 92 − 20 = 72, p = 72 ÷ 6 = 12. Answer: 12 people. 15.33 comes from dividing the whole £92 by £6 without first subtracting the £20 fixed cost: 92 ÷ 6 ≈ 15.33. 4.3 comes from swapping the two amounts round, subtracting £6 and dividing by £20: (92 − 6) ÷ 20 = 4.3. 18.67 comes from adding the fixed cost instead of subtracting it: (92 + 20) ÷ 6 ≈ 18.67.
- (c) 250 miles — Find the distance travelled in 1 hour: 150 ÷ 3 = 50 miles. Multiply by 5 hours: 50 × 5 = 250 miles. Giving 300 miles doubles the original distance (150 × 2 = 300) using a scale factor of 2 instead of the correct 5 ÷ 3. Giving 200 miles adds only one extra hour's distance, 50, instead of the two extra hours actually needed (150 + 50 = 200, rather than 150 + 100). Giving 90 miles divides by the scale factor instead of multiplying (150 × 3 ÷ 5 = 90).
- (c) 115 — Method: use corresponding angles to carry the 65° angle from the lower rafter up to the upper rafter, then use angles on a straight line to move to the other side of the strut. Working: the angle above the upper rafter and to the left of the strut corresponds to the given angle, so it is 65°; the angle above the upper rafter and to the right of the strut lies on a straight line with it, so it is 180 − 65 = 115. Answer: 115°. A candidate who assumes the angle stays 65° without allowing for the move from the left of the strut to the right of it gives 65. A candidate who uses 90° instead of 180°, working out 90 − 65, gets 25. A candidate who adds instead of subtracting, working out 180 + 65, gets 245.
- (d) 4 — Method: list the elements of each set in full, then find which elements appear in both lists — that is A ∩ B. Working: factors of 12 = {1, 2, 3, 4, 6, 12}. Factors of 18 = {1, 2, 3, 6, 9, 18}. The elements in both lists are 1, 2, 3 and 6, so A ∩ B = {1, 2, 3, 6} and n(A ∩ B) = 4. Answer: 4. Watch out: writing down 6 gives n(A), the size of the factors-of-12 list on its own, not the size of the overlap. Writing down 8 comes from counting every element that appears in EITHER list, 1, 2, 3, 4, 6, 9, 12 and 18 — that is the union, a different set from the intersection. And writing down 3 misses that 1 is a factor of both 12 and 18, and so belongs in A ∩ B alongside 2, 3 and 6.
- (a) 8.15 ≤ y < 8.25 — Rounding to 1 decimal place means the error interval spans half of 0.1, so 0.05, either side of 8.2: 8.2 − 0.05 = 8.15 and 8.2 + 0.05 = 8.25. The lower bound uses ≤ because 8.15 itself rounds to 8.2, but the upper bound uses < because 8.25 would round up to 8.3. So the error interval is 8.15 ≤ y < 8.25. A candidate who used the wrong rounding band gave 8.1 ≤ y < 8.2. A candidate who used a strict inequality at both ends wrote 8.15 < y < 8.25, wrongly excluding 8.15 itself. A candidate who added the full 0.1 instead of half of it wrote 8.2 ≤ y < 8.3.
- (a) −10 — Method: multiply each bracket out, treating the second bracket as being multiplied by −3 because it is subtracted, then collect like terms. Working: 4(2x − 1) = 8x − 4 and −3(x + 2) = −3x − 6, so the expression becomes 8x − 4 − 3x − 6 − 5x; the x terms give 8x − 3x − 5x = 0, so no term in x survives, and the numbers give −4 − 6 = −10. Answer: −10. The distractors: 2 comes from expanding −3(x + 2) as −3x + 6, leaving the numbers −4 + 6; 5x − 10 comes from forgetting the final −5x, so the x terms give 8x − 3x = 5x; −7 comes from multiplying the 4 over only the first term of its bracket, giving 8x − 1 and so the numbers −1 − 6.
- (b) £60 — £48 represents 100% − 20% = 80% of the original price. 1% = £48 ÷ 80 = £0.60, so 100% = £0.60 × 100 = £60.
- (c) 32 cm — Method: a perimeter is lengths added together, so it scales by the length scale factor itself, which is 4 ÷ 3 going from the smaller triangle to the larger one — not by its square. Working: 24 ÷ 3 = 8, and 8 × 4 = 32. Answer: 32 cm. The distractors: 18 cm comes from multiplying by 3 ÷ 4, scaling from the larger triangle down to the smaller one; 25 cm comes from adding the difference between the parts of the ratio, 4 − 3 = 1, to the perimeter; 8 cm comes from dividing by 3 and stopping there, before multiplying by 4.
- (a) 2 — Method: systematically try each possible number of 20p coins, starting from one, and check whether the amount left over can be made exactly using whole 10p coins. Working: one 20p coin leaves 40p, made from four 10p coins — valid. Two 20p coins leave 20p, made from two 10p coins — valid. Three 20p coins leave 0p, which needs zero 10p coins — not valid, since at least one 10p coin is required. So there are 2 different ways. Answer: 2. 3 comes from counting the case of three 20p coins and no 10p coins as if it were allowed, even though at least one 10p coin is required. 4 comes from ignoring the 'at least one of each' condition altogether and counting every way of making 60p, including three 20p coins with no 10p coins and six 10p coins with no 20p coins. 1 comes from finding only one of the two valid combinations and stopping the systematic list too early.
- (d) £20 — Let f be the joining fee and m the monthly fee: f + 3m = 100 and f + 6m = 160. Subtracting the first equation from the second eliminates f: 3m = 60, so m = 20. A candidate who finds the joining fee instead of the monthly fee would get f = 100 − 3(20) = £40. A candidate who divides Ben's total by his number of months, ignoring that part of the cost is a fixed joining fee, would get 160 ÷ 6 ≈ £26.67. A candidate who divides the difference in cost by the total number of months instead of the difference in months would get (160 − 100) ÷ 9 ≈ £6.67.
- (c) 1.6 — The multiplier from tins to pounds is found by dividing the cost by the number of tins: £8 ÷ 5 = 1.6. 0.625 comes from dividing the wrong way round, tins ÷ cost (5 ÷ 8), which is the multiplier from pounds back to tins. 3 comes from subtracting the number of tins from the cost (8 − 5), instead of dividing. 40 comes from multiplying the cost by the number of tins (8 × 5), instead of dividing.
- (c) 600 — Method: round each number to the nearest 100, then add the rounded values. Working: 113 is nearer to 100 than to 200, so it rounds to 100; 491 is nearer to 500 than to 400, so it rounds to 500; adding those gives the estimate. Answer: 600. The distractors: 500 comes from rounding each number down to the hundred below instead of to the nearest hundred, giving 100 + 400; 700 comes from rounding each number up to the hundred above, giving 200 + 500; 604 is the exact total, worked out in full when the question asks for an estimate.
- (a) 36 — Method: add the parts of the ratio, divide the total by the number of parts to find the value of one part, then multiply by the number of parts in the share asked for. Working: 1 + 2 + 3 = 6 parts, 72 ÷ 6 = 12 for one part, and the largest number is 3 parts, so 3 × 12 = 36. Answer: 36. The distractors: 12 is the value of one part, which is the smallest of the three numbers rather than the largest; 24 is 2 parts, the middle number; 216 comes from multiplying 72 by 3 instead of dividing 72 by the 6 parts first.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.