Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (b) 6 — List the factors of each number: the factors of 12 are 1, 2, 3, 4, 6 and 12; the factors of 18 are 1, 2, 3, 6, 9 and 18. The common factors are 1, 2, 3 and 6, and the highest of these is 6. Picking 2, a common factor but not the largest, gives an answer that is too small. Picking 3, also a common factor but still not the largest, gives another answer that is too small. Working out the lowest common multiple instead of the highest common factor gives 36. So the highest common factor of 12 and 18 is 6.
- (a) 6b − 5 — Method: sort the expression into terms in b and number terms, then collect each kind, keeping the sign in front of every term. Working: the b terms give 2b + 2b + 2b = 6b; the number terms are −1 and −4, and −1 − 4 = −5. Answer: 6b − 5. The distractors: 6b − 3 comes from working out the difference 4 − 1 instead of adding two negative numbers; 6b + 5 comes from adding 1 and 4 while ignoring both minus signs; 8b − 5 comes from multiplying the coefficients 2, 2 and 2 instead of adding them.
- (b) 6 litres — Method: find the volume of the cuboid in cm³, then change cm³ into litres using 1 litre = 1000 cm³. Working: 30 × 20 × 10 = 6000 cm³, and 6000 ÷ 1000 = 6. Answer: 6 litres. The distractors: 60 litres comes from using 1 litre = 100 cm³; 600 litres comes from using 1 litre = 10 cm³; 0.6 litres comes from using 1 litre = 10 000 cm³.
- (a) Chord — Method: identify what the two endpoints of the line segment are, and whether it must pass through the centre. Working: a line joining any two points on the circumference, whether or not it passes through the centre, is a chord, and the diameter is just a special case of it. A student who answers diameter has wrongly assumed the line must pass through the centre. A student who answers radius has confused joining two circumference points with joining the centre to the circumference. A student who answers tangent has confused a line crossing through the circle with one that only touches its outside. Answer: chord.
- (a) 0.16 — The probability that Kofi fails a single attempt is 1 − 0.6 = 0.4. Since the attempts are independent, the probability he fails both is 0.4 × 0.4 = 0.16. Choosing 0.36 comes from squaring the probability of PASSING instead, 0.6 × 0.6 = 0.36, which is the probability of passing both attempts, not failing both. Choosing 0.4 comes from giving the probability of failing just one attempt, forgetting to combine two attempts. Choosing 0.24 comes from multiplying the fail probability by the pass probability, 0.4 × 0.6 = 0.24, mixing up passing and failing between the two attempts.
- (b) 1 — Method: for data in a frequency table, find the position of the median using (n + 1) ÷ 2, then read off the value at that position from the cumulative frequencies. Working: there are 19 pupils, so the median is the 10th value. The cumulative frequencies are 7 (up to 0 pets), 10 (up to 1 pet), 14 (up to 2 pets) and 19 (up to 3 pets). The 10th value falls at the end of the '1 pet' group, so the median is 1 pet. Giving 0 pets is the mode — the category with the highest frequency, 7 — not the median. Giving 3, the highest number of pets minus the lowest, finds the range, a different statistic entirely. Giving 19 states the total number of pupils, not a number of pets at all. Find the middle POSITION first, then read off the value it belongs to — do not confuse it with the mode, the range or the total.
- (a) 49 — Method: 7² means 7 multiplied by itself. Working: 7 × 7 = 49. Answer: 49. 14 comes from working out 7 × 2, treating the power 2 as a number to multiply by rather than an instruction to multiply 7 by itself. 77 comes from writing the digit 7 twice side by side, treating the power as an instruction to repeat the digit rather than to multiply. 9 comes from working out 7 + 2, adding the base and the power instead of multiplying the base by itself.
- (b) 3, 6, 9, 12 — Method: substitute the positions n = 1, 2, 3 and 4 into the rule in turn, because a position-to-term rule gives each term from its own position number. Working: 3 × 1 = 3, 3 × 2 = 6, 3 × 3 = 9 and 3 × 4 = 12. Answer: 3, 6, 9, 12. The distractors: 3, 9, 27, 81 comes from reading 3n as 3 multiplied by itself n times and so multiplying by 3 at every step; 0, 3, 6, 9 comes from starting the count at n = 0, which shifts every term one place; 4, 5, 6, 7 comes from reading 3n as n + 3 and adding 3 to each position number instead of multiplying by 3.
- (c) 450 g — Method: use the amount of butter given to find the value of one part of the ratio, then find the mass of flour, and finally add flour and butter to get the total. Working: 180 g of butter is 2 parts, so one part is 180 ÷ 2 = 90 g. The flour is 3 parts, so 3 × 90 = 270 g, and the total mass is 270 + 180 = 450 g. So the baker can make 450 g of pastry. Distractor 270 g is only the mass of flour, forgetting to add the butter back on. Distractor 300 g comes from treating the 180 g as 3 parts instead of 2, swapping which ratio number matches the butter. Distractor 540 g comes from multiplying 180 by 3 directly instead of first finding the value of one part.
- (b) 2 cm — Method: a diameter is made of two radii end to end, so going back from a diameter to a radius undoes that doubling, which gives radius = diameter ÷ 2. Working: the diameter is 4 cm, so the radius is 4 ÷ 2 = 2 cm. Answer: 2 cm. The distractors: 8 cm comes from multiplying by 2 instead of dividing by it, the relationship applied in the wrong direction; 1 cm comes from halving twice, once to reach the radius and then once more as though a second halving were called for; 0.5 cm comes from writing the division upside down as 2 ÷ 4 rather than 4 ÷ 2.
- (a) Ben, because a larger sample is closer to the theory — Method: a relative frequency is an estimate of a probability, and for an unbiased experiment that estimate tends towards the theoretical value as the sample grows. Working: Priya's estimate rests on 50 results, so a few unexpected heads move it a long way; one extra head shifts her relative frequency by 1 ÷ 50 = 0.02. Ben's estimate rests on 500 results, where one extra head shifts his relative frequency by only 1 ÷ 500 = 0.002. The larger sample therefore swings far less around the true value. Answer: Ben's relative frequency is the one more likely to be close, because a larger unbiased sample tends closer to the theoretical probability. The distractors: saying a small sample is less affected by luck reverses the result, since it is the small sample that swings most; saying every flip is a separate random event is true of the flips themselves but says nothing about the estimates, and is often used to argue wrongly that the number of trials does not matter; saying 500 flips must give exactly 250 heads confuses an expected value with a guaranteed one, and 500 flips very rarely give exactly 250 heads.
- (d) 0.25 — Dividing by 1000 moves every digit three place-value columns, so 250 ÷ 1000 = 0.25. A candidate who divides by 100 instead of 1000 gets 2.5. A candidate who divides by 10,000 instead of 1000 gets 0.025. A candidate who divides by 10 instead of 1000 gets 25.
- (c) 4 — Method: the distance of a point from the x-axis is measured vertically, so it is the size of the y-coordinate taken without its sign. Working: the point (−6, 4) has y-coordinate 4, so moving straight down to the x-axis covers 4 units, and a distance is written as a positive number. Answer: 4. The distractors: 6 comes from using the x-coordinate, which measures the distance from the y-axis rather than from the x-axis; −6 comes from that same mistake with the minus sign left in place, although a distance is never negative; 10 comes from adding the two distances, 6 and 4, as though the question asked how far the point is from both axes together.
- (d) 0.6 g/cm³ — Density = mass ÷ volume. 60 ÷ 100 = 0.6 g/cm³. 1.67 g/cm³ comes from dividing the volume by the mass instead of the mass by the volume (100 ÷ 60). 6000 g/cm³ comes from multiplying the mass by the volume instead of dividing (60 × 100). 40 g/cm³ comes from subtracting the mass from the volume (100 − 60) instead of dividing.
- (c) AB means the segment or its length, shown by context — Method: recall the standard convention for a two-letter label such as AB. Working: AB names the segment AND its length; the sentence around it shows which is meant — 'draw AB' means the segment, 'AB = 5 cm' means the length. Options: 'a different symbol is needed' and 'must be written as |AB|' both describe stricter rules than the convention GCSE actually uses; 'AB can only mean the segment' ignores that the same label is also used for the length. Answer: AB means the segment or its length, shown by context.
- (a) 14 — Brackets first: 9 − 6 = 3. Then multiply: 3 × 3 = 9. Then add: 5 + 9 = 14. So the answer is 14. A candidate who worked out (5 + 3) × (9 − 6) = 8 × 3 = 24 added before multiplying, ignoring the priority of operations outside the bracket. A candidate who dropped the brackets and worked out 5 + 3 × 9 − 6 = 5 + 27 − 6 = 26 multiplied by the 9 itself instead of by the bracket's value of 3, losing the grouping the brackets give. A candidate who forgot to add the 5 and only worked out 3 × (9 − 6) = 3 × 3 = 9 dropped a term from the calculation.
- (a) 3 — Method: substitute the given value into the formula and carry out the subtraction in the order the formula is written. Working: replacing m with 8 gives L = 8 − 5, and 8 − 5 = 3. Answer: 3. The distractors: 13 comes from adding 5 to 8 instead of subtracting it; 40 comes from reading m − 5 as a multiplication and working out 8 × 5; −3 comes from subtracting the wrong way round and working out 5 − 8.
- (a) 8 cm — Method: a scale of 1 : n means the real distance is n times the distance on the map, so to go from the real distance back to the map distance, put both lengths in the same unit and then divide by the scale. Working: 1 km = 100 000 cm, so 8 km = 8 × 100 000 = 800 000 cm; 800 000 ÷ 100 000 = 8. Answer: 8 cm. The distractors: 800000 cm comes from converting the 8 km into centimetres and stopping there, so the division by the scale — the inverse operation the question asks for — is never done; 80 cm comes from taking a metre to be 1000 cm, which turns 8 km into 8 × 1000 × 1000 = 8 000 000 cm and gives 8 000 000 ÷ 100 000 = 80; 0.08 cm comes from taking a kilometre to be 1000 cm, which turns 8 km into 8000 cm and gives 8000 ÷ 100 000 = 0.08.
- (a) Fewer than 48,500 people attended — Method: a figure given to the nearest thousand lies within half of 1,000, that is 500, of the figure printed, so the attendance is at least 47,500 and below 48,500. Working: 48,000 − 500 = 47,500 and 48,000 + 500 = 48,500, and an attendance of 48,500 would have been reported as 49,000, so every possible attendance is below 48,500. Answer: Fewer than 48,500 people attended. The distractors: more than 48,500 turns the upper limit of the range into a minimum; fewer than 47,500 uses the lower limit as though it were the upper one; more than 48,000 assumes the printed figure was rounded down, when it could just as well have been rounded up from a smaller attendance.
- (c) 25 — Find the constant multiplier from the given pair: 15 ÷ 6 = 2.5, so y is always 2.5 times x. When x = 10, y = 10 × 2.5 = 25. 19 comes from assuming an additive relationship instead of a multiplicative one — adding the difference 15 − 6 = 9 onto 10. 4 comes from using the multiplier the wrong way round (6 ÷ 15 = 0.4) and then multiplying by 10. 15 comes from simply repeating the given value of y, without applying the multiplier to the new value of x at all.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.