Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (b) 4/9 — Method: double the butter part of the ratio, keeping flour the same, find the new total, then write butter's part over the new total. Working: the new ratio is flour : butter = 5 : 4, since butter doubles from 2 to 4. New total = 5 + 4 = 9. Fraction of butter = 4/9. Answer: 4/9. 2/9 comes from forgetting to double the butter part and using the original value 2 over the new total of 9. 4/7 comes from doubling the butter part correctly to 4 but keeping the old total of 7 instead of working out the new total. 2/5 comes from using the original ratio 5:2 directly as butter over flour without doubling anything.
- (d) (−1, 4) — In parallelogram ABCD the side DC is parallel and equal to the side AB, so D = C − AB. The vector from A to B is (2 − (−3), 1 − 1) = (5, 0), so D = (4 − 5, 4 − 0) = (−1, 4). A candidate who adds this vector to C instead of subtracting it gets (4 + 5, 4 + 0) = (9, 4). A candidate who subtracts A's coordinates from C's rather than the vector AB, and drops the minus sign on −3 while doing so, works out (4 − 3, 4 − 1) and gets (1, 3). A candidate who makes only the y-part of that slip, working out 4 − 1 instead of 4 − 0, gets (−1, 3).
- (b) 3:2 — Write both fractions over a common denominator of 4: 3/4 stays as 3/4, and 1/2 = 2/4. Comparing the numerators gives the ratio 3 : 2. Getting 2 : 3 swaps the two parts round. Getting 3 : 1 comes from using the numerator of the first fraction and the original numerator of the second fraction (1) without converting to a common denominator. Getting 2 : 1 comes from using only the denominators, 4 and 2, and simplifying those instead of the numerators.
- (d) RHS, using AM as common side — Triangle ABM and triangle ACM both have a right angle at M, since AM is perpendicular to BC. AB and AC are the hypotenuses of the two triangles and are equal, and AM is a side common to both triangles, giving a right angle, equal hypotenuses and one further equal side, exactly RHS, so 'RHS, using AM as common side' is correct. 'SAS, right angle as included angle' wrongly treats the right angle at M as included between AB and AM, but AB is the hypotenuse, not one of the two sides forming that right angle. 'SSS, using BM = CM as a fact' wrongly assumes BM equals CM as a given fact, when this is only true because of the RHS congruence, not before it, so it cannot be used to prove that congruence. 'ASA, AB as the included side' again wrongly labels a side as if it could sit between two angles when only one angle, the right angle, is actually known.
- (b) 10 — Method: the number using at least one machine is the running total plus the weights total minus the overlap, since the overlap would otherwise be added in twice; the number using neither is the survey total minus that. Working: at least one machine = 24 + 20 − 9 = 35. Neither = 45 − 35 = 10. Answer: 10. Watch out: subtracting 24 + 20 from 45 without adding the 9 back, 45 − 24 − 20 = 1, removes the overlap twice over instead of once. Writing down 15, which is 24 − 9, gives the number who use ONLY the running machines, not the number who use neither. And writing down 9 mistakes the overlap region for the region outside both circles altogether.
- (d) Full-time workers, as most are at work at that time — Method: a sample is biased when the method of contact makes part of the population much less likely to be reached, so test each group against where its members actually are between 10 am and 2 pm on a weekday, and test each stated reason against the facts. Working: those hours are the middle of the working day, so people in full-time employment are at work and not beside a landline telephone, while people who are retired and people who are unemployed are far more likely to be at home and are reached at the usual rate; the method therefore collects far fewer replies from full-time workers than their share of the adult population the council is consulting. Answer: full-time workers, as most are at work at that time. The distractors: the reply naming retired people rests on the false claim that most retired people are at work in the daytime, when in fact a daytime call reaches them more easily than anyone; the reply naming unemployed people rests on the false claim that they are out during the day, when they too are among the easiest people to reach by a daytime call; the reply naming children rests on the false claim that children are at home at 11 am on a Tuesday, when they are at school and so are not reached by the call at all, and school-age children are in any case not the adults whose views the council is collecting.
- (a) 3.84 × 10⁵ — 384,000 = 3.84 × 100,000 = 3.84 × 10⁵, with the decimal point moved five places and the coefficient kept between 1 and 10. Moving the point six places instead of five gives 3.84 × 10⁶, ten times too large. Leaving the coefficient as 38.4 gives 38.4 × 10⁴, which is not between 1 and 10. Using a negative exponent instead of a positive one gives 3.84 × 10⁻⁵, a number far smaller than 1.
- (a) (n − 5)/2 — Method: do the subtraction first, keep it together as a single bracket, then divide that whole bracket by 2. Working: 'subtract 5 from n' is (n − 5); 'divide the result by 2' means the whole bracket goes over 2, giving (n − 5)/2. Answer: (n − 5)/2. n/2 − 5 comes from dividing n by 2 first and only then subtracting 5, the wrong order. 2(n − 5) comes from multiplying by 2 instead of dividing. (5 − n)/2 comes from subtracting n from 5 instead of subtracting 5 from n, the wrong way round.
- (d) 20 — Method: equivalent ratios are linked by a single multiplier, so find it from the part you know and apply it to the other part. Working: 15 ÷ 3 = 5, so the multiplier is 5, and 4 × 5 = 20. Answer: 20. The distractors: 16 comes from adding the difference between the ratio parts, 4 − 3 = 1, to 15, treating the ratio as a difference; 60 comes from multiplying 15 by 4 without first dividing by 3; 11.25 comes from using the ratio the wrong way round, working out 15 × 3 ÷ 4.
- (c) 6 — A cuboid has six flat faces: a top, a bottom and four sides. Count each flat surface once: top, bottom, front, back, left, right — six faces in total, so the answer is 6. Choosing 8 counts the vertices (corners) instead of the faces. Choosing 12 counts the edges instead of the faces. Choosing 4 counts only the four side faces and forgets the top and the bottom.
- (b) 1/4 — There are 4 × 4 = 16 equally likely ordered outcomes for the two dice. The pairs that total 5 are: first dice 1 with second dice 4; first dice 2 with second dice 3; first dice 3 with second dice 2; and first dice 4 with second dice 1 — which is 4 outcomes, so the probability is 4/16 = 1/4. A candidate who answers 1/8 has listed only 2 of the four pairs, forgetting that first dice 1 with second dice 4 and first dice 4 with second dice 1 are separate outcomes because the dice are different. A candidate who answers 3/16 has found 3 pairs instead of 4, missing one from the list. A candidate who answers 1/16 has counted only a single pair, such as first dice 2 with second dice 3, and treated the order of the dice as not mattering.
- (c) 2 — First write 1 1/2 as an improper fraction, 3/2. To divide by 3/4, multiply by its reciprocal, 4/3: 3/2 × 4/3 = 12/6 = 2. Dropping the whole number and dividing only the fractional part, 1/2 ÷ 3/4 = 1/2 × 4/3, gives 2/3. Multiplying by 3/4 directly instead of using its reciprocal, 3/2 × 3/4, gives 9/8. Using the reciprocal of the first fraction instead of the second, 2/3 × 3/4, gives 1/2.
- (c) x ≥ 3 — Method: collect the number terms first; the x term is negative, so the final step multiplies both sides by −1, and that is the one step that turns the inequality sign round. Working: subtracting 5 from both sides of 5 − x ≤ 2 gives −x ≤ −3; multiplying both sides by −1 turns −x into x and −3 into 3, and because the multiplier is negative the ≤ becomes ≥, so x ≥ 3. Answer: x ≥ 3. The distractors: x ≤ 3 comes from multiplying by −1 without turning the sign round, the commonest slip on this type; x ≤ −3 comes from reading −x ≤ −3 as though the minus sign could simply be rubbed off the left-hand side; x ≥ −3 comes from turning the sign round correctly but leaving the right-hand side at −3 instead of multiplying it by −1 as well.
- (c) £21 — Method: the two amounts are in the same ratio as 5:3, so write 5:3 = 35:x, find the value of one part and then take the number of parts asked for. Working: Harry's £35 is 5 parts, so one part is £35 ÷ 5 = £7; Isla has 3 parts, so 3 × £7 = £21. Answer: £21. The distractors: £7 is the value of a single part, given as Isla's share instead of being multiplied by the 3 parts she has; £28 comes from finding one part correctly and then working out £35 − £7, subtracting one part from Harry's money instead of taking three parts; £33 comes from treating the ratio additively — the parts differ by 5 − 3 = 2, so £2 is taken off Harry's £35, but a ratio compares by multiplying, not by subtracting.
- (c) 90° — A tangent to a circle always meets the radius drawn to the point of contact at a right angle, so the angle between the tangent and the radius at P is 90°. 180° confuses the tangent with the diameter through P, as if the radius continued in a straight line into the tangent. 45° halves the true angle by mistake. 60° comes from confusing this fact with the angle of an equilateral triangle.
- (c) 2.6 × 10⁵ — In standard form, A must satisfy 1 ≤ A < 10. Moving the decimal point in 260,000 to just after the 2 gives A = 2.6, and the decimal point moved 5 places, so 260,000 = 2.6 × 10⁵. A candidate who wrote 26 × 10⁴ used a value of A outside the required range, even though it has the same overall value. A candidate who wrote 2.6 × 10⁶ counted one place too many when moving the decimal point. A candidate who wrote 0.26 × 10⁶ used a value of A below 1, again outside the required range.
- (b) x = 0 — Method: the first coordinate of a point measures how far to the left or right of the origin it is, so a point that is neither left nor right of the origin has a first coordinate of zero. Working: the y-axis is the vertical line through the origin; every point on it lies directly above or directly below the origin with no sideways movement at all, so its first coordinate is zero while its second coordinate may take any value. Answer: x = 0. The distractors: y = 0 is the condition for lying on the x-axis, the other axis; x = 1 comes from confusing the y-axis with the vertical line one unit to the right of it; x = y is the condition for the diagonal through the origin, which meets the y-axis at the origin only.
- (d) 1 : 2500 — Method: convert the real-world measurement to the same unit as the drawing (centimetres) before writing the ratio. Working: 25 m = 2500 cm, so the scale is 1 : 2500. Wrong options: 1 : 25 comes from not converting metres to centimetres at all; 1 : 250 comes from converting metres to centimetres using ×10 instead of ×100; 1 : 2.5 comes from converting in the wrong direction (treating 25 m as 2.5 cm).
- (a) x¹¹ — Method: when multiplying powers of the same base, add the indices. Working: 7 + 4 = 11, so x⁷ × x⁴ = x¹¹. x²⁸ comes from multiplying the indices, 7 × 4 = 28, instead of adding them. x³ comes from working out 7 − 4 = 3, which is the rule for dividing powers, not multiplying them. 11x comes from adding the indices to make 11 but then treating x as a coefficient instead of a power. Answer: x¹¹.
- (a) 675 ml — How much a jug holds is a volume, and volumes of similar solids scale with the cube of the length scale factor. The length scale factor is 12 ÷ 8 = 1.5, so the volume scale factor is 1.5 × 1.5 × 1.5 = 3.375. The larger jug holds 200 × 3.375 = 675 ml. Multiplying the scale factor by 3 instead of raising it to the power 3 is the mistake to guard against here.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.