Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (c) 3 or −5 — Method: a point a fixed distance from another can lie on either side of it, so move the given distance in each direction from the starting point. Working: moving 4 units to the right gives −1 + 4 = 3, and moving 4 units to the left gives −1 − 4 = −5. Answer: 3 or −5. The distractors: 5 or −3 comes from starting at 1 instead of −1, giving 1 + 4 and 1 − 4; 3 only comes from moving to the right and forgetting that the point could lie to the left as well; 4 or −4 comes from measuring the distance from zero instead of from point A, which just repeats the given distance.
- (c) 32 — The terms are 60, 53, 46, 39, 32 — each found by subtracting 7 from the term before, so the 5th term is 32. Subtracting 7 five times from the first term instead of four times, 60 − 7 × 5 = 25, treats the first term as if it came before the sequence starts. Adding 7 four times instead of subtracting, 60 + 7 × 4 = 88, uses the wrong operation. Stopping one term early gives the 4th term, 39.
- (d) 2:3 — The highest common factor of 20 and 30 is 10. Divide both parts of the ratio by 10: 20 ÷ 10 = 2 and 30 ÷ 10 = 3, so 20 : 30 = 2 : 3. Dividing by 5 instead of the highest common factor gives 4 : 6, which still shares a common factor of 2, so it is not fully simplified. Dividing only the first part by 10 and leaving the second part unchanged gives 2 : 30, which is not equivalent to the original ratio. Swapping the order of the two parts gives 3 : 2, the ratio the wrong way round.
- (a) 2.40m — Method: a cost found from a rate is the rate multiplied by the amount bought. Working: the rate is £2.40 per kilogram and the amount is m kilograms, so the cost is 2.40 × m. Answer: 2.40m. A candidate who divides the amount by the rate instead of multiplying writes m/2.40. A candidate who adds the rate to the amount instead of multiplying writes 2.40 + m. A candidate who subtracts the rate from the amount instead of multiplying writes m − 2.40.
- (d) 3/10 — Method: list the full possibility space as pairs of coin and spinner results, then count how many pairs satisfy both conditions and divide by the size of the whole space. Working: the coin gives 2 outcomes and the spinner gives 5, so the full space has 2 × 5 = 10 equally likely pairs. The pairs with a tail and an odd number are (T,1), (T,3) and (T,5), which is 3 out of 10. Answer: 3/10. Watch out: writing down 1/2 uses only the coin's own chance of a tail and ignores that the spinner also has to land on an odd number. Writing down 3/5 uses only the spinner's chance of landing on an odd number and ignores the coin altogether. And writing down 1/10 counts just one matching outcome, such as (T,1), instead of all three pairs that satisfy both conditions.
- (c) 20 kg ≤ mass < 30 kg — The modal class is the class with the highest frequency. Reading the plotted points, the frequencies are 6, 10, 16, 6 and 2, so the highest frequency is 16, plotted at the midpoint 25. A class of width 10 centred on 25 runs from 25 − 5 = 20 to 25 + 5 = 30, so the modal class is 20 kg ≤ mass < 30 kg. Writing '25 kg' gives only the midpoint, not the class — the modal class is an interval, not a single value. '10 kg ≤ mass < 20 kg' is the class before the peak, centred on 15, which has frequency 10, not the highest. '30 kg ≤ mass < 40 kg' is the class after the peak, centred on 35, which has frequency 6, not the highest.
- (a) 8.35 ≤ L < 8.45 — Method: a length rounded to 1 decimal place lies within half of 0.1 cm, that is 0.05 cm, of the value written down. The lower limit is included because it rounds up to that value, and the upper limit is excluded because it rounds up to the next value instead. Working: 8.4 − 0.05 = 8.35 and 8.4 + 0.05 = 8.45, so a length of 8.35 cm still rounds to 8.4 cm while a length of 8.45 cm rounds to 8.5 cm. Answer: 8.35 ≤ L < 8.45. The distractors: 8.3 ≤ L < 8.5 goes a whole 0.1 cm either side instead of half of it; 8.35 < L ≤ 8.45 has the two limits the wrong way round, excluding the length that does round to 8.4 cm and including the one that does not; 8.4 ≤ L < 8.5 is the interval for a length truncated to 1 decimal place, not one rounded to it.
- (d) An inequality, because ≤ compares the two sides — The symbol ≤ means 'is less than or equal to', so the statement compares the sizes of the two sides instead of saying they are equal: that makes it an inequality. Solving it gives n ≤ 5, a whole range of values rather than the single value an equation would give. An identity has to be true for every value of the letter, and this fails at n = 6, so it is not one. A formula works one quantity out from another, and there is only one letter here.
- (d) 4/3 — The amount of yellow paint is 0.75 times the amount of blue paint. As a fraction, 0.75 = 3/4, so yellow = 3/4 of blue. To write blue as a fraction of yellow, use the reciprocal: flip 3/4 to get 4/3. 3/4 comes from keeping the original fraction without inverting it. 1/4 comes from computing 1 − 3/4 = 1/4, which is not how a fraction reverses. 40/3 comes from converting 0.75 to a fraction as 75/1000 = 3/40 (misplacing the decimal point), then inverting that.
- (b) (8, −6) — Multiplying a column vector by a scalar multiplies both numbers in the vector by that scalar: 2p = (2×4, 2×(−3)) = (8, −6). (8, −3) doubles the top number but leaves the bottom number, −3, unchanged. (4, −6) doubles the bottom number but leaves the top number, 4, unchanged. (8, 6) doubles both numbers correctly in size but loses the negative sign on the bottom number.
- (d) 1/12 — Method: list the full possibility space of sandwich-and-drink pairs, then divide the one matching pair by the size of the whole space. Working: there are 3 × 4 = 12 equally likely sandwich-and-drink pairs, and exactly one of them is egg and water. Answer: 1/12. Watch out: writing down 1/7 comes from adding the two counts, 3 + 4 = 7, instead of multiplying them to build the possibility space. Writing down 1/3 uses only the chance of choosing egg out of 3 sandwiches and ignores the drink altogether. And writing down 1/4 uses only the chance of choosing water out of 4 drinks and ignores the sandwich altogether.
- (b) 3/50 — Method: write the decimal over the power of ten that matches the number of digits after the point, counting every digit including a zero, then divide the numerator and the denominator by their highest common factor. Working: 0.06 has two digits after the point, so it is 6 hundredths and can be written as 6/100; the highest common factor of 6 and 100 is 2, and 6 ÷ 2 = 3 with 100 ÷ 2 = 50. Answer: 3/50. The distractors: 3/5 comes from ignoring the zero straight after the point and converting 0.6 instead, giving 6/10, which cancels to 3/5; 3/500 comes from counting three decimal places instead of two and writing 6/1000, which cancels to 3/500; 1/6 comes from putting 1 over the digits after the point, as though 0.06 meant one sixth.
- (c) x = 2 and x = 3 — x² − 5x + 6 factorises as (x − 2)(x − 3), since −2 and −3 multiply to give 6 and add to give −5. The graph crosses the x-axis where each bracket equals zero: x − 2 = 0 gives x = 2, and x − 3 = 0 gives x = 3. The option x = −2 and x = −3 comes from reading the signs inside the brackets directly instead of solving x − 2 = 0 and x − 3 = 0. The option x = 2 and x = −3 mixes up the sign of only one root. The option x = −1 and x = −6 comes from picking the wrong pair of factors of 6 (1 and 6 instead of 2 and 3) and then reading their signs directly from the brackets.
- (b) 8 — Method: the gradient of a straight line is the change in the vertical value divided by the change in the horizontal value between two points on the line. Working: from the origin (0, 0) to (5, 40) the vertical change is 40 − 0 = 40 and the horizontal change is 5 − 0 = 5, so the gradient is 40 ÷ 5 = 8, which here means a cost of £8 for each litre. Answer: 8. The distractors: 0.125 comes from dividing the horizontal change by the vertical change, 5 ÷ 40, which gives litres per pound instead of the gradient; 40 comes from reading off the vertical value of the point and calling it the gradient, ignoring the 5 litres it took to reach that cost; 35 comes from subtracting the two coordinates, 40 − 5, instead of dividing them.
- (a) A smaller circle — Since the cutting plane is parallel to the circular base, the cross-section is also a circle, but smaller than the base because the cone narrows as it rises towards the apex, so 'a smaller circle' is correct. 'A triangle' wrongly describes the outline seen from the side of the cone, not a horizontal cross-section. 'An ellipse' would only result from a cut made at an angle to the base, not one parallel to it. 'The same size circle as the base' wrongly ignores that the cone tapers, so any parallel cross-section above the base must be smaller.
- (d) £33.00 — The profit is 3/8 of £24 = (£24 ÷ 8) × 3 = £3 × 3 = £9.00. Selling price = £24 + £9.00 = £33.00. A candidate who gives the profit instead of the selling price gets £9.00. A candidate who subtracts the profit instead of adding it gets £24 − £9 = £15.00. A candidate who works out one eighth of £24 and adds that on, forgetting to multiply by the numerator 3, gets £24 + £3 = £27.00.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (c) Yes — 700 ÷ 7 = 100 ml for the 1 part of concentrate — Method: add the ratio parts to find the total number of parts, divide the total volume by this, then use the ratio to find concentrate's share. Working: 1 + 6 = 7 parts. 700 ÷ 7 = 100 ml per part. Concentrate = 1 part = 100 ml, so Freya is correct. Wrong options: 'divide 700 by 6' uses only one of the ratio numbers instead of the total of 7 parts, giving about 117 ml; '600 ml is concentrate' swaps which ratio number belongs to the concentrate and which belongs to the water; 'half of 700 ml should be concentrate' ignores the ratio altogether and assumes an equal split.
- (d) 60 — Method: a percentage acts as an operator, so finding 20% of an amount means multiplying it by 20/100, which cancels to 1/5. Working: 20% = 20/100 = 1/5, and 300 ÷ 5 = 60. Answer: 60 seats. The distractors: 15 comes from reading 20% as one twentieth and working out 300 ÷ 20 = 15; 30 comes from finding 10% of 300 and stopping there instead of doubling it; 6 comes from converting 20% to 0.02 rather than 0.2, giving 0.02 × 300 = 6.
- (a) 3/8 — Convert 2 hours to minutes: 2 hours = 120 minutes. Form the fraction 45/120. Both numbers share a factor of 15, so 45 ÷ 15 = 3 and 120 ÷ 15 = 8, giving 3/8. 8/3 comes from writing the fraction the wrong way round, as 120/45. 9/40 comes from converting 2 hours using ×100 instead of ×60, treating it as 200 minutes, then simplifying 45/200. 45/2 comes from not converting the hours to minutes at all, and writing 45 over 2.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.