Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
Non-calculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (b) 4 — Method: list the factors of each number and compare them; the highest common factor is the largest number that appears in both lists. Working: the factors of 20 are 1, 2, 4, 5, 10, 20; the factors of 32 are 1, 2, 4, 8, 16, 32. The numbers that appear in both lists are 1, 2 and 4, and the largest of these is 4. 2 is a common factor of 20 and 32 but not the largest one. 8 is a factor of 32 but not of 20, since 20 ÷ 8 is not a whole number. 160 is the lowest common multiple of 20 and 32, not their highest common factor. Answer: 4.
- (b) (−2, 0) — Method: a graph meets the x-axis where the y-value is 0, so setting y = 0 turns the equation into a linear equation in x. Working: 0 = 3x + 6 gives 3x = −6, so x = (−6) ÷ 3 = −2 and the meeting point is (−2, 0). Answer: (−2, 0). The distractors: (2, 0) comes from solving 3x = −6 and then dropping the minus sign from the result; (0, 6) is the y-axis crossing, found by substituting x = 0 instead of y = 0; (6, 0) comes from reading the constant 6 straight off as the x-coordinate, without dividing by 3 and without changing its sign.
- (c) a decrease of 25% — Method: use multipliers. An increase of 50% is × 1.5 and a decrease of 50% is × 0.5. Working: 1.5 × 0.5 = 0.75, so the final price is 75% of the original. Answer: a decrease of 25%. The distractors: no change comes from assuming +50% and −50% cancel; a decrease of 50% comes from applying only the second change; an increase of 25% has the direction wrong.
- (b) $\binom{-0.4}{-7}$ — The overall movement is the sum of the two vectors: (−1.2 + 0.8, −4.5 + (−2.5)) = (−0.4, −7). '$\binom{-2}{-2}$' comes from subtracting the second vector from the first instead of adding them. '$\binom{-0.4}{7}$' gets the top number right but drops the negative sign on the bottom number. '$\binom{2}{-7}$' comes from treating −1.2 + 0.8 as if the signs did not matter, giving +2 instead of −0.4.
- (a) 90% — Method: turn the fraction into a decimal by dividing the numerator by the denominator, then multiply the decimal by 100 to turn it into a percentage. Working: 9 ÷ 10 = 0.9, and 0.9 × 100 = 90. Answer: 90%, which is the same probability written in a third form, and all three forms sit at the same point on the 0 to 1 scale. The distractors: 9% comes from reading the numerator of the fraction straight off as the percentage; 10% comes from reading the denominator straight off as the percentage; 0.9% comes from correctly finding the decimal 0.9 and then writing a percentage sign after it without multiplying by 100.
- (b) Interpolation — The salary is being estimated for a value of x between 1 and 15, which is inside the range of x-values that were actually plotted, so this is interpolation. Extrapolation would apply if the estimate used a value of x below 1 or above 15, outside the plotted range. Correlation describes the relationship between the two variables, not the reliability of an estimate, and causation describes one variable actually causing a change in the other, which is a different idea altogether — neither is the word being asked for here.
- (a) 0.5, 0.55, 0.56, 0.6, 0.601 — Compare the decimals by giving them all the same number of decimal places first: 0.600, 0.550, 0.601, 0.500, 0.560. Ordering these from smallest to largest gives 0.500, 0.550, 0.560, 0.600, 0.601, which is 0.5, 0.55, 0.56, 0.6, 0.601. Comparing the digits as though they were whole numbers, reading 0.601 as "601" and 0.5 as "5", without padding to the same number of decimal places, gives the wrong order 0.5, 0.6, 0.55, 0.56, 0.601, because it ignores the place value of each digit. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 0.601, 0.6, 0.56, 0.55, 0.5. Misreading the close values 0.55 and 0.56 and swapping them gives 0.5, 0.56, 0.55, 0.6, 0.601. So the correct order, smallest to largest, is 0.5, 0.55, 0.56, 0.6, 0.601.
- (d) 20 km/h — Method: total distance = 9 + 21 = 30 km. Total time = 15 + 45 + 30 = 90 minutes = 1.5 hours. Average speed = total distance ÷ total time = 30 ÷ 1.5 = 20 km/h. Distractor origins: 40 km/h ignores the 45-minute stop, dividing the total distance by the travel time only (30 km ÷ 45 minutes = 40 km/h); 39 km/h averages the two section speeds, 36 km/h and 42 km/h, instead of using total distance over total time; 36 km/h uses only the first section's speed (9 km in 15 minutes), ignoring the second section and the stop.
- (a) f = 4s — Method: in the ratio 4 : 1 the sugar is 1 part, so one part weighs s grams, and the flour is 4 of those same parts. Working: one part is s, so four parts are 4 × s, giving f = 4s; as a check, if s = 3 then the flour is 4 × 3 = 12 g, and 12 : 3 does simplify to 4 : 1. Answer: f = 4s. The distractors: f = s/4 uses the ratio the wrong way round, as though the flour were 1 part and the sugar 4; f = s + 3 comes from reading the ratio as a difference, 4 − 1 = 3, and adding that difference instead of multiplying; f = 5s uses 4 + 1 = 5, the total number of parts, as the multiplier, but 5 parts is the whole mixture and not the flour on its own.
- (c) (6, 2) — Method: add the vector's components to the point's coordinates, x-component to x, y-component to y. Working: A′ = (2 + 4, 3 + (−1)) = (6, 2). Options: (6, 4) comes from adding the size of the y-component, 1, instead of subtracting it; (1, 7) comes from swapping the components, adding the y-component (−1) to the x-coordinate and the x-component (4) to the y-coordinate; (−2, 4) comes from reversing the sign of both components, using the vector (−4, 1) instead of (4, −1). Answer: (6, 2).
- (b) 10 — There are 25 equally likely ordered pairs in total. Listing the pairs where the Spinner P score is less than the Spinner Q score gives 10 outcomes, running from (1, 2) up to (4, 5). Choosing 15 comes from also including the 5 pairs where the two scores are equal, such as (1, 1) and (2, 2), which do not satisfy 'less than'. Choosing 4 comes from counting only the outcomes where the scores differ by exactly 1, such as (1, 2) and (2, 3), and missing the pairs that differ by 2, 3 or 4. Choosing 20 comes from correctly excluding the 5 outcomes where the two scores are equal, 25 − 5 = 20, but forgetting to also exclude the outcomes where Spinner P is bigger than Spinner Q, rather than smaller.
- (a) 7 — Method: BIDMAS deals with the index first, then the multiplication, then the subtraction. Working: (−2)² = (−2) × (−2) = 4, then 3 × 4 = 12, and finally 12 − 5 = 7. Answer: 7. The distractors: −17 comes from squaring only the 2 and keeping the minus sign, giving 3 × (−4) = −12 and then −12 − 5 = −17; 31 comes from multiplying before applying the index, giving (3 × (−2))² = (−6)² = 36 and then 36 − 5 = 31; −3 comes from carrying out the subtraction before the multiplication, giving 3 × (4 − 5) = 3 × (−1) = −3.
- (c) x = 2 or x = 3 — Method: factorise into two brackets whose numbers multiply to the constant term and add to the coefficient of x, then set each bracket equal to zero. Working: two numbers that multiply to 6 and add to −5 are −2 and −3, so x² − 5x + 6 = (x − 2)(x − 3) = 0; then x − 2 = 0 gives x = 2 and x − 3 = 0 gives x = 3. Answer: x = 2 or x = 3. The distractors: x = −2 or x = −3 comes from reading the numbers inside the brackets as the solutions instead of changing their signs; x = 1 or x = 6 comes from taking the first factor pair of 6 without checking that the pair adds to −5; x = 5 or x = 6 comes from reading the solutions straight off the 5 and the 6 in the equation.
- (a) 12/5 — If A is 5/12 of B, then B is the reciprocal of that fraction times A: flip 5/12 to get 12/5, so B is 12/5 of A. 5/12 comes from keeping the same fraction without flipping it, treating the relationship as if it works the same way in both directions. 7/12 comes from computing 1 − 5/12 = 7/12, which is not how a fraction reverses. 12/7 comes from subtracting 5 from 12 to get 7, and writing 12 over that, instead of swapping the numerator and denominator of 5/12.
- (d) 80° — The four angles of any quadrilateral add up to 360°. Three of the angles add up to 100 + 85 + 95 = 280°, so the fourth angle is 360 − 280 = 80°. "70°" comes from using 350° as the total instead of 360°, an easy slip on the quadrilateral angle sum. "280°" comes from stopping at the sum of the three given angles and writing that total down as the answer, instead of subtracting it from 360°. "260°" comes from subtracting only the one angle 100° from 360°, instead of subtracting all three given angles.
- (a) 14 — Multiply both numbers by 10 to clear the decimals: 8.4 becomes 84 and 0.6 becomes 6. Then divide: 84 ÷ 6 = 14, so 14 complete pieces can be cut. Scaling only the divisor by 10 and leaving the dividend as 8.4 gives 8.4 ÷ 6 = 1.4, which rounds down to 1 complete piece — the dividend was never converted. Scaling only the dividend by 10 and leaving the divisor as 0.6 gives 84 ÷ 0.6 = 140. Rounding the divisor from 0.6 to 0.7 before dividing, trading accuracy for a rounder number, gives 8.4 ÷ 0.7 = 12. So 14 complete pieces of ribbon can be cut.
- (a) −5 — Method: apply the machine's operation to the input, and carry the sign of the input through the multiplication. Working: the machine gives 5 × (−1); a positive number multiplied by a negative number gives a negative result, and 5 × 1 = 5, so the output is 5 below zero. Answer: −5, which is one lot of −1 taken five times. The distractors: 5 comes from working out 5 × 1 and losing the minus sign of the input; 4 comes from adding 5 to −1 instead of multiplying; −6 comes from subtracting 5 from −1 instead of multiplying.
- (a) 1/9 — The ratio copper : tin is 9:1, so write tin over copper: 1/9. (9/1 comes from writing the ratio the wrong way round, copper over tin. 1/10 comes from comparing the tin to the total mass of the alloy, 1 part out of 10. 9/10 comes from comparing the copper to the total mass of the alloy, 9 parts out of 10.)
- (c) (12 + 3π) cm — The perimeter of a quarter-circle is made up of two straight radii plus a quarter of the circumference. The two radii give 2 × 6 = 12 cm, and a quarter of the circumference is (1/4) × 2 × π × 6 = 3π cm, so the total perimeter is (12 + 3π) cm. Giving only the curved part, 3π cm, forgets the two straight edges entirely. Using the full circumference, 2 × π × 6 = 12π, instead of a quarter of it gives (12 + 12π) cm. Including only one radius instead of two gives (6 + 3π) cm.
- (c) 25 — Find the constant multiplier from the given pair: 15 ÷ 6 = 2.5, so y is always 2.5 times x. When x = 10, y = 10 × 2.5 = 25. 19 comes from assuming an additive relationship instead of a multiplicative one — adding the difference 15 − 6 = 9 onto 10. 4 comes from using the multiplier the wrong way round (6 ÷ 15 = 0.4) and then multiplying by 10. 15 comes from simply repeating the given value of y, without applying the multiplier to the new value of x at all.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.