Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 2 (calculator)
The real Paper 2 is 1.5 hour 30 minutes and 80 marks, calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with a calculator allowed. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
CalculatorGCSE Foundation
GCSE Foundation sample Paper 2 (calculator)
MathsUKwww.geekhero.co.uk
- 1.A roll of ribbon is 8.4 m long. Ribbon is cut into pieces that are each 0.6 m long. Work out how many complete pieces can be cut from the roll.
- 2.a = 2 and b = 5. Work out the value of a²b.
- 3.Isla says that the ratio 4:6 is equivalent to the ratio 6:9. Is she correct? Give a reason for your answer.
- 4.A cylinder has a radius of 3 cm and a height of 10 cm. Using π = 3.14, work out the volume of the cylinder. Give your answer to the nearest whole number of cubic centimetres.
- 5.The probability that Priya's dentist appointment overruns is 0.35. Work out the probability that it does not overrun.
- 6.A scatter graph has 12 plotted points. Four pupils each draw a line of best fit on the same graph and count how many of the 12 points lie above their line and how many lie below it: Amir — 10 above, 2 below. Priya — 6 above, 6 below. Kofi — 2 above, 10 below. Leah — 0 above, 12 below. Write down the name of the pupil whose line was drawn correctly, so that the points are roughly balanced above and below it.
- 7.A cycle route is 350 m long. A footpath runs alongside it for 3/7 of that length. Work out the length of the footpath.
- 8.Here are the first four terms of an arithmetic sequence: 5, 9, 13, 17. Work out the 5th term.
- 9.A printer prints at a constant rate. The time taken to print a batch of forms is inversely proportional to the printer's speed, in pages per minute. Printing at 20 pages per minute takes 15 minutes. Work out how long the same batch takes to print at 25 pages per minute. Give your answer in minutes.
- 10.A trundle wheel has a diameter of 0.5 m. It is rolled along the ground and makes 20 complete turns. Using π = 3.14, work out the total distance rolled, in metres.
- 11.A factory finds that the probability a randomly chosen light bulb is defective is 0.035. In a batch of 4,000 bulbs, work out how many bulbs you would expect to work correctly.
- 12.A gardener has 42 tulip bulbs and 56 daffodil bulbs. She plants them in rows, with every row containing the same number of tulip bulbs and the same number of daffodil bulbs, and no bulbs left over. Work out the greatest number of rows she can plant.
- 13.Two numbers have a sum of 50. The larger number is twice the smaller number. Work out the smaller number.
- 14.Water flows into a tank at a constant rate. After 8 minutes the tank holds 200 litres. Write the ratio of time in minutes to volume in litres, in its simplest form.
- 15.Write down the name given to a quadrilateral that has exactly one pair of parallel sides.
- 16.Write down the fraction, in its simplest form, that is equal to 0.6
- 17.Make x the subject of the formula y = 2x − 9.y = 2x − 9
- 18.Write 45 minutes : 2 hours as a ratio in its simplest form.
- 19.Work out (−2/5) × (−10/3). Give your answer as a fraction in its simplest form.
- 20.A metal sample has a mass of 342.6 g and a volume of 18 cm³. Work out the density of the sample, in g/cm³, to 1 decimal place.
Answer key
- (a) 14 — Multiply both numbers by 10 to clear the decimals: 8.4 becomes 84 and 0.6 becomes 6. Then divide: 84 ÷ 6 = 14, so 14 complete pieces can be cut. Scaling only the divisor by 10 and leaving the dividend as 8.4 gives 8.4 ÷ 6 = 1.4, which rounds down to 1 complete piece — the dividend was never converted. Scaling only the dividend by 10 and leaving the divisor as 0.6 gives 84 ÷ 0.6 = 140. Rounding the divisor from 0.6 to 0.7 before dividing, trading accuracy for a rounder number, gives 8.4 ÷ 0.7 = 12. So 14 complete pieces of ribbon can be cut.
- (b) 20 — a²b means a² multiplied by b: a² = 2² = 4, and 4 × 5 = 20. Reading the expression as (ab)² instead of a²b gives (2 × 5)² = 100. Squaring b instead of a, 2 × 5² = 50, squares the wrong letter. Adding a² and b instead of multiplying them, 2² + 5 = 9, uses the wrong operation.
- (d) Yes, because 4 × 9 = 6 × 6 — Method: two ratios are equal when their cross-products are equal, so multiply the first part of each ratio by the second part of the other. Working: 4 × 9 = 36 and 6 × 6 = 36; the two products match, so the ratios are equal, and simplifying both to 2:3 shows the same thing. Answer: yes, because 4 × 9 = 6 × 6. The distractors: the reason that the number 6 appears in both ratios reaches the right verdict from a surface match, since a figure shared by two ratios says nothing about equivalence — 4:6 and 6:5 share a 6 and are not equal; the reason built on 9 − 6 and 6 − 4 compares the differences inside each ratio, 3 against 2, which is additive thinking and ends at a verdict of no; the reason built on 4 × 6 and 6 × 9 multiplies the two parts of each ratio together instead of across the pair, giving 24 against 54 and again a verdict of no.
- (d) 283 cm³ — Volume of a cylinder = πr²h. Using π = 3.14: V = 3.14 × 3² × 10 = 3.14 × 9 × 10 = 282.6, which rounds to 283 cm³. A pupil who uses the diameter, 6 cm, instead of the radius gets 3.14 × 6² × 10 = 1130.4 ≈ 1130 cm³. A pupil who forgets to square the radius gets 3.14 × 3 × 10 = 94.2 ≈ 94 cm³. A pupil who uses the circumference formula 2πr instead of πr² gets 2 × 3.14 × 3 × 10 = 188.4 ≈ 188 cm³. The correct volume is 283 cm³.
- (c) 0.65 — Overrunning and not overrunning are exhaustive: between them they cover every outcome, so their probabilities sum to 1. Work out 1 − 0.35 = 0.65. Writing 0.35 again is the probability that the appointment overruns, not its complement — the subtraction was never done. Adding instead of subtracting gives 1 + 0.35 = 1.35, which cannot be a probability at all. Subtracting each digit from 10 instead of borrowing from the 1, so 10 − 3 = 7 tenths and 10 − 5 = 5 hundredths, gives 0.75.
- (a) Priya — A line of best fit should be drawn so that the plotted points are roughly balanced above and below it. Work out the difference between the two counts for each pupil: Amir 10 − 2 = 8; Kofi 10 − 2 = 8 (10 below and 2 above); Leah 12 − 0 = 12; Priya 6 − 6 = 0. Priya's line has the smallest difference, an exact balance of 6 above and 6 below, so her line is drawn correctly. Amir's line has 10 of the 12 points above it, so it is drawn too low. Kofi's line has 10 of the 12 points below it, so it is drawn too high. Leah's line has every single point below it, so it is not a line of best fit at all.
- (c) 150 m — Method: a fraction acts as an operator, so finding 3/7 of a length means dividing by the denominator and multiplying by the numerator. Working: 350 ÷ 7 = 50, so one seventh of the route is 50 m, and three sevenths is 50 × 3 = 150 m. Answer: 150 m. The distractors: 50 m comes from finding one seventh and stopping there instead of multiplying by 3; 1050 m comes from multiplying by the numerator without dividing by the denominator, giving 350 × 3 = 1050; 200 m comes from working out the stretch of the route the footpath does not run alongside, which is 4/7 of 350 m, instead of the stretch it does.
- (b) 21 — Method: find the gap between neighbouring terms, then add one gap to the last term that is known. Working: 9 − 5 = 4, 13 − 9 = 4 and 17 − 13 = 4, so 4 is added each time; the 5th term is one step on from the 4th term, so it is 17 + 4. Answer: 21. The distractors: 25 comes from adding the 4 twice and landing on the 6th term; 20 comes from multiplying the position by the common difference, 5 × 4, and ignoring the fact that the sequence starts at 5 rather than at 4; 22 comes from adding the first term, 5, to 17 instead of adding the common difference.
- (a) 12 — Speed × time is constant: k = 20 × 15 = 300. At 25 pages per minute, the time is 300 ÷ 25 = 12 minutes. Getting 18.75 comes from treating speed and time as directly proportional and working out 15 × 25 ÷ 20 instead of dividing k by the new speed. Getting 20 comes from adding the increase in speed (25 − 20 = 5) onto the time (15 + 5 = 20). Getting 10 comes from subtracting that same increase in speed from the time (15 − 5 = 10).
- (a) 31.4 — Method: first find the circumference of one turn using π × diameter, then multiply by the number of turns. Working: circumference = 3.14 × 0.5 = 1.57 m; total distance = 1.57 × 20 = 31.4 m. A student who answers 15.7 has mistakenly halved the diameter again before multiplying, using 0.25 m instead of 0.5 m. A student who answers 3.14 has simply written down π itself, without completing the circumference or multiplying by the number of turns. A student who answers 62.8 has mistakenly doubled the diameter to 1 m before multiplying, treating the given length as a radius. Answer: 31.4 m.
- (a) 3,860 — The probability a bulb works correctly is the complement of being defective: 1 − 0.035 = 0.965. Expected number working correctly = 0.965 × 4,000 = 3,860. Using the probability of being defective instead of its complement gives 4,000 × 0.035 = 140, the expected number of DEFECTIVE bulbs, not working ones. Shifting the decimal point in the complement, using 0.0965 instead of 0.965, gives 4,000 × 0.0965 = 386. Assuming every bulb works, ignoring the 0.035 probability altogether, gives the full batch of 4,000.
- (b) 14 — Method: the greatest number of identical rows is the highest common factor of the two bulb totals, found by taking every prime factor the two totals share. Working: 42 = 2 × 3 × 7 and 56 = 2 × 2 × 2 × 7, so the prime factors common to both are 2 and 7, giving a highest common factor of 2 × 7 = 14. 2 comes from taking only the common factor 2 and forgetting the common factor 7. 7 comes from taking only the common factor 7 and forgetting the common factor 2. 168 is the lowest common multiple of 42 and 56, not their highest common factor. Answer: 14.
- (d) 50/3 — Method: call the smaller number x, write the larger number in terms of x and use the total. Working: the larger number is 2x, so x + 2x = 50, that is 3x = 50 and x = 50/3. Answer: 50/3, since 50/3 added to 100/3 makes 50 and 100/3 is twice 50/3. The distractors: 100/3 is the larger of the two numbers rather than the smaller one asked for; 25 comes from halving 50 and treating the two numbers as equal; 24 comes from reading 'twice the smaller number' as 'two more than the smaller number' and solving x + (x + 2) = 50.
- (b) 1:25 — Write the ratio time : volume using the numbers in the question: 8 : 200. Divide both parts by their highest common factor, 8, to give 1 : 25. (25:1 comes from writing the ratio the wrong way round, volume : time. 8:25 comes from dividing only the volume by 8 and leaving the time unchanged. 25:8 is that same mistake written the wrong way round.)
- (c) Trapezium — A trapezium is defined as a quadrilateral with exactly one pair of parallel sides.
- (d) 3/5 — Method: a decimal with one digit after the point is a number of tenths, so it is written over 10 and then cancelled. Working: 0.6 is six tenths, so 0.6 = 6/10; the highest common factor of 6 and 10 is 2, and 6 ÷ 2 = 3 with 10 ÷ 2 = 5. Answer: 3/5. The distractors: 2/3 comes from confusing 0.6 with the recurring decimal 0.666..., which is the one that equals 2/3; 1/6 comes from putting 1 over the single digit after the point; 3/50 comes from using hundredths for a one-place decimal, giving 6/100, which then cancels by 2 to 3/50.
- (a) x = (y + 9) / 2 — Method: undo the subtraction of 9 first, then undo the multiplication by 2. Working: y = 2x − 9, so adding 9 to both sides gives y + 9 = 2x, then dividing both sides by 2 gives x = (y + 9) / 2. The value x = (y − 9) / 2 comes from a sign error, keeping the −9 instead of moving it to +9. The value x = 2(y + 9) comes from multiplying by 2 instead of dividing. The value x = y / 2 + 9 comes from dividing by 2 before adding 9, the wrong order of operations, instead of dividing the whole bracket.
- (d) 3:8 — Convert 2 hours to minutes: 2 hours = 120 minutes. The ratio is 45 : 120. The highest common factor of 45 and 120 is 15. Divide both parts by 15: 45 ÷ 15 = 3 and 120 ÷ 15 = 8, giving 3 : 8. Leaving the hours unconverted gives 45 : 2 — the units on each side are different, so this does not compare like with like. Dividing by 5 instead of 15 gives 9 : 24, which still shares a common factor of 3, so it is not fully simplified. Swapping the order gives 8 : 3, hours to minutes instead of minutes to hours.
- (d) 4/3 — Method: the product of two negative numbers is positive, so work with 2/5 × 10/3 and then simplify. Multiply the numerators together and the denominators together. Working: 2 × 10 = 20 and 5 × 3 = 15, giving 20/15; both 20 and 15 divide by 5, so 20/15 = 4/3. Answer: 4/3. The distractors: −4/3 has the arithmetic right but keeps a minus sign, from treating negative × negative as negative; 3/25 comes from turning the second fraction upside down and multiplying, which divides instead of multiplying and gives 2/5 × 3/10 = 6/50; −56/15 comes from adding the two fractions instead of multiplying them, giving −6/15 − 50/15.
- (b) 19.0 g/cm³ — Density = mass ÷ volume. 342.6 ÷ 18 = 19.0333…, which rounds to 19.0 g/cm³ (1 d.p.). 6166.8 g/cm³ comes from multiplying the mass by the volume instead of dividing (342.6 × 18). 324.6 g/cm³ comes from subtracting the volume from the mass (342.6 − 18) instead of dividing. 0.1 g/cm³ comes from dividing the volume by the mass instead of the mass by the volume (18 ÷ 342.6 = 0.0525…, rounded to 1 d.p.).
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.