Sample paper · GCSE Foundation · grades 1–5
GCSE Foundation sample Paper 2 (calculator)
The real Paper 2 is 1.5 hour 30 minutes and 80 marks, calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Foundation qualification — number 25%, algebra 20%, ratio, proportion and rates of change 25%, geometry and measures 15%, probability 7.5%, statistics 7.5% — with a calculator allowed. AO1 / AO2 / AO3 at this tier: 50% / 25% / 25%.
CalculatorGCSE Foundation
Answer key: GCSE Foundation sample Paper 2 (calculator)
MathsUKwww.geekhero.co.uk
- (b) 5.2 × 10⁶ — Method: write the digits as a coefficient that is at least 1 and less than 10, then count the places the decimal point moves to reach that position. Working: the digits give a coefficient of 5.2, and the decimal point travels from the end of 5,200,000 until it sits between the 5 and the 2, a move of 6 places. Answer: 5.2 × 10⁶. The distractors: 52 × 10⁵ is the same amount but not in standard form, because 52 is not less than 10; 5.2 × 10⁵ comes from counting the five zeros in 5,200,000 rather than the six places the decimal point moves; 5.2 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left.
- (d) 1 — Method: find the step in the outputs for each step of 1 in the input, write the rule from that step and from one pair of values, then apply the rule to the last input. Working: the outputs −5, −3, −1 rise by 2 while x rises in ones, so x is multiplied by 2; at x = 1, 2 × 1 = 2 while y = −5, so 7 is subtracted, giving y = 2x − 7; at x = 4 the rule gives 2 × 4 = 8 and 8 − 7 = 1. Answer: y = 1. The distractors: 3 comes from carrying the outputs on one step too far, to x = 5; 0 comes from assuming the outputs −5, −3, −1 carry on by adding 1 rather than by adding 2; 8 comes from doubling the input and forgetting to subtract the 7.
- (a) f = 4s — Method: in the ratio 4 : 1 the sugar is 1 part, so one part weighs s grams, and the flour is 4 of those same parts. Working: one part is s, so four parts are 4 × s, giving f = 4s; as a check, if s = 3 then the flour is 4 × 3 = 12 g, and 12 : 3 does simplify to 4 : 1. Answer: f = 4s. The distractors: f = s/4 uses the ratio the wrong way round, as though the flour were 1 part and the sugar 4; f = s + 3 comes from reading the ratio as a difference, 4 − 1 = 3, and adding that difference instead of multiplying; f = 5s uses 4 + 1 = 5, the total number of parts, as the multiplier, but 5 parts is the whole mixture and not the flour on its own.
- (b) 104 — Method: angles on a straight line add up to 180°. Working: 180° − 76° = 104°. A student who answers 76 has mistaken this for the vertically opposite angle, which is equal, rather than the adjacent angle on a straight line. A student who answers 90 has wrongly assumed the two paths must be perpendicular. A student who answers 14 has subtracted 76° from 90° instead of from 180°. Answer: 104°.
- (a) Class A — Class A: 18/24 = 0.75 = 75%. Class B: 21/30 = 0.7 = 70%. Since 75% > 70%, class A had the greater proportion passing, even though fewer pupils passed there in total. Choosing class B compares the raw numbers of pupils who passed (21 > 18) rather than the proportions. The two proportions are not equal — 0.75 and 0.7 are different values, so the two classes did not have the same pass rate. The class sizes being different does not prevent a comparison: converting each to a proportion makes the two classes directly comparable, so the answer can be determined.
- (d) No, the range uses only the fastest and slowest time — Method: check what the range is built from, then look at what it leaves out. Working: both teams have a fastest time of 20 seconds and a slowest of 40 seconds, so both ranges are 40 − 20 = 20 seconds and Tomás has that part right. But the range is calculated from those two values alone. Six of Team A's seven times lie between 20 and 25 seconds, with a single time far out at 40; Team B is the other way round, with six of its seven times at 30 seconds or more and a single time far out at 20. So Team A bunches at the fast end and Team B at the slow end. The two patterns are quite different, and the range cannot see the difference because the five middle times never enter the calculation. Answer: no, because the range uses only the fastest and slowest time. The distractors: comparing the means answers a different question, since a mean measures position rather than spread, and two sets with the same spread can have different means; saying that equal ranges mean equal spread is the very assumption that fails here; saying that seven times each forces the spreads to match confuses the size of a data set with how its values are arranged inside it.
- (a) 1,500 ≤ m < 2,500 — Method: a four-digit figure written to 1 significant figure has been rounded to the nearest 1,000, so the mass lies within half of 1,000, that is 500, of the figure given. Working: 2,000 − 500 = 1,500 and 2,000 + 500 = 2,500. The lower limit is included, because 1,500 kg rounds up to 2,000 kg to 1 significant figure, while 2,500 kg rounds up to 3,000 kg, so the upper limit is not. Answer: 1,500 ≤ m < 2,500. The distractors: 1,950 ≤ m < 2,050 comes from rounding to the nearest 100 instead of to 1 significant figure; 1,000 ≤ m < 3,000 goes a whole 1,000 either side instead of half of it; 1,500 < m ≤ 2,500 has the two limits the wrong way round.
- (c) 4n + 3 — Method: use the given number of extra tiles per pattern as the coefficient of n, then find the constant that fits pattern 1. Working: each pattern adds 4 tiles, so the expression has the form 4n + c. Substituting n = 1: 4(1) + c = 7, so c = 3. Answer: the number of tiles in pattern n is 4n + 3. The value 4n comes from leaving out the constant c altogether. The value 4n + 7 comes from using pattern 1's total, 7, as the constant directly instead of subtracting the difference first. The value 7n + 4 comes from swapping the roles of the number of tiles in pattern 1 and the number added each time.
- (b) 460 — To increase by 15%, multiply by 1.15 (100% + 15%). 400 × 1.15 = 460. 60 comes from working out only the increase, 400 × 0.15 = 60, and forgetting to add it to the original number. 415 comes from adding 15 directly to 400 instead of 15% of 400. 340 comes from multiplying by 0.85, decreasing instead of increasing: 400 × 0.85 = 340.
- (c) An L-shape — Method: to find the front elevation, trace the outline of the solid seen from directly in front. Working: the low, wide cuboid gives a wide rectangle across the bottom, and the taller, narrower cuboid sitting on one end adds a narrower rectangle rising above only that end of the base, so the outline steps up on one side only. Answer: an L-shape. The distractors: a rectangle comes from taking the outline of the box the whole solid would just fit inside, ignoring the step created by the taller block. A T-shape comes from placing the taller block in the middle of the base instead of at one end, so that the base would show on both sides of it. A parallelogram comes from copying a face as it is drawn in the sketch — the top of the taller block is drawn as a sloping parallelogram because the solid is drawn at an angle — instead of drawing the true outline seen looking straight at the front.
- (b) 1/2 — Method: for equally likely outcomes the probability is the number of favourable outcomes divided by the total number of outcomes, written in its simplest form. Working: the dice can show 1, 2, 3, 4, 5 or 6, so there are 6 equally likely scores; the even scores are 2, 4 and 6, which is 3 of them, giving 3/6. Answer: 3/6 cancels to 1/2, which sits halfway along the 0 to 1 probability scale. The distractors: 1/3 comes from listing only 2 and 4 as the even scores and writing 2/6; 1/6 comes from giving the probability of one particular even score, such as the 2, rather than any even score; 2/3 comes from listing the even numbers as 0, 2, 4 and 6 and writing 4/6, forgetting that a dice has no 0 on it.
- (a) The tape can only give the length to the nearest centimetre — Method: a measurement should never be written to a finer degree of accuracy than the instrument used can read. Working: the tape is marked in centimetres, so the smallest division Leah can read is 1 cm, which is 0.01 m and two decimal places in metres; writing 7.3157 m claims the length to the nearest tenth of a millimetre, four decimal places, which the markings cannot support. A record of 7.32 m, to the nearest centimetre, is what this tape justifies. Answer: The tape can only give the length to the nearest centimetre. The distractors: the nearest millimetre contradicts the markings described in the question, which are centimetres, and would still claim more accuracy than the tape offers; the rule that a length in metres must be written to 2 decimal places borrows the habit of writing money to the penny, when the accuracy of a length depends on the instrument; rounding to the nearest metre would throw away accuracy the tape genuinely provides.
- (b) 6 — Method: for any point that lies on y = k/x, the value of k is found by multiplying the x-coordinate and the y-coordinate together, since k = x × y. Working: k = 2 × 3 = 6. Answer: k = 6. Distractor refutation: 1.5 comes from dividing the y-coordinate by the x-coordinate instead of multiplying them. 5 comes from adding the two coordinates instead of multiplying them. 9 comes from misreading the point's x-coordinate as 3 instead of 2, then multiplying 3 × 3.
- (c) L = d/5 — The scale 1 : 20 means each cm on the drawing represents 20 cm in real life, so the real length in cm is 20d. Converting to metres by dividing by 100: L = 20d/100 = d/5.
- (b) 8.5 m — First apply the scale to convert the plan length to a real length in centimetres: 3.4 × 250 = 850 cm. Then convert centimetres to metres by dividing by 100: 850 ÷ 100 = 8.5, so the wall is 8.5 m long. Choosing 850 m applies the scale correctly but forgets to convert the answer from centimetres into metres. Choosing 0.85 m divides by 1000 instead of 100, confusing the centimetre-to-metre conversion with a metre-to-kilometre one. Choosing 3.4 m ignores the scale factor completely and just restates the plan length as if it were already the real length.
- (b) 5² — Method: multiplying two powers of the same base adds their indices, and a negative index is added as a negative number. Working: −2 + 4 = 2, so 5⁻² × 5⁴ = 5². Answer: 5². The distractors: 5⁶ comes from adding the sizes of the indices, 2 + 4, and ignoring the minus sign; 5⁻⁸ comes from multiplying the indices, −2 × 4, instead of adding them; 5⁻⁶ comes from subtracting the indices, −2 − 4, as though the powers were being divided.
- (d) 3 — The expression has three terms separated by + and − signs: 4x², −7x and 3. A candidate who thinks a number on its own does not count as a term says there are 2 terms, missing the 3. A candidate who miscounts the minus sign as creating an extra term says there are 4. A candidate who splits each term into its coefficient and letter part separately (4, x², 7, x, 3) says there are 5.
- (c) 450 g — Method: use the amount of butter given to find the value of one part of the ratio, then find the mass of flour, and finally add flour and butter to get the total. Working: 180 g of butter is 2 parts, so one part is 180 ÷ 2 = 90 g. The flour is 3 parts, so 3 × 90 = 270 g, and the total mass is 270 + 180 = 450 g. So the baker can make 450 g of pastry. Distractor 270 g is only the mass of flour, forgetting to add the butter back on. Distractor 300 g comes from treating the 180 g as 3 parts instead of 2, swapping which ratio number matches the butter. Distractor 540 g comes from multiplying 180 by 3 directly instead of first finding the value of one part.
- (c) 36 — Method: set the outcomes out in a grid with one die along the top and the other down the side, so that every cell of the grid is one outcome, and count the cells. Working: the red die can land in 6 ways, so the grid has 6 columns, and the blue die can also land in 6 ways, so the grid has 6 rows; the number of cells is 6 × 6 = 36. Answer: 36. The distractors: 12 comes from adding 6 and 6 instead of multiplying them; 6 comes from counting the outcomes of a single die and forgetting that the second die also has to land; 21 comes from treating the two dice as indistinguishable, so that a red 2 with a blue 3 and a red 3 with a blue 2 are counted as one outcome.
- (a) 1.375 — The multiplier is the new value divided by the original value: 176 000 ÷ 128 000 = 1.375. Choosing 0.375 comes from working out the increase as a fraction of the original (48 000 ÷ 128 000 = 0.375) and stopping there, without adding on the 1 whole that represents the original turnover. Choosing 0.727 comes from dividing the 2023 turnover by the 2024 turnover, the wrong way round (128 000 ÷ 176 000, rounded to 3 decimal places). Choosing 137.5 comes from writing the multiplier as a percentage — the 2024 turnover is 137.5% of the 2023 turnover — instead of converting it to the decimal multiplier 1.375.
How the 20 questions are shared out
- Number — 5 questions (25% of the qualification)
- Algebra — 4 questions (20% of the qualification)
- Ratio, proportion and rates of change — 5 questions (25% of the qualification)
- Geometry and measures — 3 questions (15% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.