Sample paper · GCSE Higher · grades 4–9
GCSE Higher sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Higher qualification — number 15%, algebra 30%, ratio, proportion and rates of change 20%, geometry and measures 20%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 40% / 30% / 30%.
Non-calculatorGCSE Higher
Answer key: GCSE Higher sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (d) 9 — Method: split into two cases — the soups with no restriction, and the mushroom soup on its own — then add the totals. Working: the 2 soups other than mushroom can be paired with any of the 4 sandwiches: 2 × 4 = 8. The mushroom soup can only be paired with the cheese sandwich: 1 combination. Total = 8 + 1 = 9. Answer: 9. 12 comes from working out 3 × 4 = 12 without applying the restriction at all. 8 comes from correctly finding the 2 unrestricted soups' 8 combinations, but forgetting to add back the 1 allowed mushroom-and-cheese combination. 11 comes from taking the unrestricted total of 12 and removing only 1 mushroom combination instead of all 3 disallowed ones.
- (b) 4 — Adding the two equations: the y-terms, −2y and +2y, cancel, and the x-terms combine to 5x + 3x = 8x; the right-hand sides add to 16 + 16 = 32. This gives 8x = 32, so x = 4. A candidate who adds only one of the right-hand sides, instead of both, would get 8x = 16, so x = 2. A candidate who divides 32 by 4 instead of 8 would get x = 8. A candidate who subtracts the equations instead of adding them, getting 2x − 4y = 0, and then wrongly assumes y = 0, would get x = 0.
- (b) 1:1.6 — To write 5 : 8 in the form 1 : n, divide both parts by 5, the first number, so that it becomes 1: 5 ÷ 5 = 1 and 8 ÷ 5 = 1.6, giving 1 : 1.6. Dividing both parts by 8 instead gives 0.6 : 1 (5 ÷ 8 = 0.625, rounded to 0.6) — the first part is no longer 1, so this is not in the required form. Dividing 5 by 8 but writing the result after the 1 gives 1 : 0.6, which divides in the wrong direction: n must come from 8 ÷ 5, not 5 ÷ 8. A slip in the division 8 ÷ 5, rounding it to 1.5 instead of the correct 1.6, gives 1 : 1.5.
- (d) 1.2 m² — Method: an area in square metres needs lengths in metres, so convert first and then multiply. Working: 100 cm = 1 m, so 150 cm = 1.5 m and 80 cm = 0.8 m, and the area = 1.5 × 0.8 = 1.2 m². Answer: 1.2 m². The same result comes from working in centimetres: 150 × 80 = 12 000 cm², and a square metre is a square of side 100 cm, so 100 × 100 = 10 000 cm² make one square metre and 12 000 ÷ 10 000 = 1.2. Dividing the 12 000 cm² by 100 instead, as though a square metre held only 100 square centimetres, gives 120 m²; dividing by 1000 gives 12 m². Working out the perimeter rather than the area gives 1.5 + 0.8 + 1.5 + 0.8 = 4.6, which is a length and not an area.
- (d) 5/18 — Method: list every ordered pair of dice scores whose difference is 1, then divide by the 36 equally likely pairs. Working: the pairs with a difference of 1 are (1, 2), (2, 1), (2, 3), (3, 2), (3, 4), (4, 3), (4, 5), (5, 4), (5, 6) and (6, 5), which is 10 pairs out of 36, cancelling down to 5/18. Answer: 5/18. Watch out: writing down 5/36 lists only the 5 pairs going up, (1, 2), (2, 3), (3, 4), (4, 5) and (5, 6), and misses that each one has a matching pair the other way round, such as (2, 1) — the two dice are different objects, and order matters, so each of those 5 gaps counts twice. Writing down 1/6 treats the six possible differences, 0 to 5, as equally likely and picks 1 out of 6 of them, but a difference of 1 is reached by far more pairs of scores than a difference of 5 is, so the six differences are not equally likely. And writing down 1/4 comes from adding the two dice's outcome counts instead of multiplying them, 6 + 6 = 12, and grouping the six scores into just three non-overlapping pairs one apart, {1, 2}, {3, 4} and {5, 6}, giving 3 out of that wrong pool of 12.
- (b) 4 — The difference, Bristol minus Leeds, on each day is: Monday 4 − 3 = 1, Tuesday 4 − 5 = −1, Wednesday 6 − 2 = 4, Thursday 2 − 4 = −2. The greatest amount by which Bristol exceeded Leeds is 4 hours, on Wednesday. Choosing 1 takes Monday's smaller positive difference instead of the greatest one. Choosing 2 takes the size of Thursday's difference, but that is the amount by which Leeds exceeded Bristol, the opposite direction to the one asked for. Choosing 6 takes Bristol's raw figure on Wednesday without subtracting Leeds's 2 hours first.
- (b) 5 — Method: divide the total amount of sugar by the amount needed for one cake, then round down because a part-used amount of sugar cannot make an extra whole cake. Working: 3 1/2 ÷ 2/3 = 7/2 × 3/2 = 21/4 = 5.25; only 5 complete cakes can be made, since the leftover 0.25 of a portion is not enough for a 6th cake. Answer: 5. 5.25 gives the exact result of the division without rounding down to a whole number of cakes. 7 comes from multiplying 3.5 by 2 and ignoring the need to also divide by 3 as part of dividing by the fraction 2/3. 6 comes from rounding 5.25 up to the nearest whole number instead of down, wrongly assuming a 6th cake could be made from the leftover sugar.
- (c) (0, 0) — A curve crosses the y-axis where x = 0. Substituting x = 0 into y = x³ − 4x gives y = 0³ − 4(0) = 0 − 0 = 0, so the curve crosses the y-axis at (0, 0). A candidate who reads off the coefficient of x as the y-intercept, instead of working out the constant term, might write (0, −4). A candidate who swaps the coordinates might write (4, 0). A candidate who takes the coefficient of x but drops its sign might write (0, 4).
- (d) 7/3 — Put the kettle's energy over the toaster's energy: 2.1/0.9. Multiply both numbers by 10 to clear the decimals: 21/9. Divide both by their highest common factor, 3: 21÷3 = 7, 9÷3 = 3, giving 7/3. (3/7 comes from writing the energy values the wrong way round. 4/3 comes from finding the difference, 2.1 − 0.9 = 1.2 kWh, and writing it as a fraction of the toaster's energy, 1.2/0.9. 7/10 comes from comparing the kettle's energy to the total energy used by both appliances, 2.1/3.0.)
- (d) 15 cm² — Method: identify the length that is common to both views, since it is the box's length; then read off the width from the plan view and the height from the front elevation, and multiply those two measurements to find the area of the side elevation. Working: both rectangles share a side of 8 cm, which is the box's length; the plan view's other side gives a width of 5 cm, and the front elevation's other side gives a height of 3 cm. The side elevation is bounded by the width and the height: 5 cm × 3 cm = 15 cm². Answer: 15 cm². The distractors: 24 cm² comes from giving the area of the front elevation shown (8 cm × 3 cm) instead of working out a new rectangle for the side elevation. 40 cm² comes from giving the area of the plan view shown (8 cm × 5 cm) instead of working out the side elevation. 120 cm² comes from multiplying all three measurements together (8 cm × 5 cm × 3 cm), finding the volume of the box instead of the area of one face.
- (c) 102 — Method: turn the past record into a relative frequency, then use it as an estimate of the probability of rain and multiply by the number of days being predicted for. Working: relative frequency of rain = 70 ÷ 250 = 0.28. Expected rainy days in 365 days = 365 × 0.28 = 102.2, which rounds to about 102 days. Answer: about 102 days. Watch out: writing down 48 swaps which number is the sample and which is the target, working out 70 ÷ 365 × 250 instead of 70 ÷ 250 × 365. Writing down 70 just repeats the original count of rainy days without scaling it up to the new, longer period at all. And writing down 110 comes from rounding the relative frequency to 0.3 before multiplying, 365 × 0.3 = 109.5, when 70 ÷ 250 is exactly 0.28 and needs no rounding at all.
- (d) x⁴ — Method: dividing two powers of the same letter subtracts the index of the divisor from the index of the term being divided. Working: six factors of x on the top and two on the bottom cancel in pairs, leaving 6 − 2 = 4 factors of x. Answer: x⁴. The distractors: x³ comes from dividing the indices, 6 ÷ 2, instead of subtracting them; x⁸ comes from adding the indices, 6 + 2, as though the powers were being multiplied; x¹² comes from multiplying the indices, 6 × 2, as though a power were being raised to a power.
- (b) The total volume of water, in litres, that has flowed in. — On a rate-time graph, the y-axis is in litres per minute and the x-axis is in minutes; multiplying a rate by a time gives litres per minute × minutes = litres, a total volume. So the area under the graph represents the total volume of water that has flowed in. Thinking the area itself represents the rate, rather than what the rate accumulates to, gives the wrong claim about the average rate of flow. Confusing the area with the gradient of the graph — which measures how the rate is changing — gives the wrong claim about litres per minute squared. Ignoring the flow-rate axis and focusing only on the time axis gives the wrong claim that the area is simply the total time.
- (d) 3 : 8 — Multiply both parts by 4 to clear the decimal: 0.75 × 4 = 3 and 2 × 4 = 8, giving 3 : 8, which has no common factor other than 1. Giving 75 : 200 multiplies by 100 instead of 4, and has not then been simplified down to 3 : 8. Giving 0.75 : 2 has not been converted into whole numbers at all. Giving 3 : 2 converts the first part correctly but leaves the second part unscaled.
- (c) A rotation of 180° about the origin — An enlargement by scale factor −1 sends every point (x, y) to (−x, −y) — both coordinates change sign. A rotation of 180° about the origin does exactly the same thing to every point, so the two transformations have identical effect. A reflection in the x-axis only changes the sign of the y-coordinate, sending (x, y) to (x, −y), leaving the x-coordinate untouched. A reflection in the y-axis only changes the sign of the x-coordinate, sending (x, y) to (−x, y), leaving the y-coordinate untouched. Treating a negative scale factor as though it behaves like a positive one gives no transformation at all, but the minus sign is not decorative — it reverses both coordinates. Both signs flip together, which is exactly what a 180° rotation about the origin does.
- (b) 6x − 3 = 4x + 9 — Method: multiply every term inside the bracket by the number outside it; the right-hand side stays as it is given. Working: 3 × 2x = 6x and 3 × (−1) = −3, so 3(2x − 1) = 6x − 3. Answer: 6x − 3 = 4x + 9. 6x − 1 = 4x + 9 comes from multiplying only the 2x by 3 and leaving the −1 unchanged. 5x − 3 = 4x + 9 comes from adding the 3 to the 2 instead of multiplying, treating 3 × 2x as (3 + 2)x = 5x. 6x − 4 = 4x + 9 comes from working out 3 × (−1) as −1 − 3 = −4 instead of 3 × (−1) = −3.
- (c) 250 miles — Find the distance travelled in 1 hour: 150 ÷ 3 = 50 miles. Multiply by 5 hours: 50 × 5 = 250 miles. Giving 300 miles doubles the original distance (150 × 2 = 300) using a scale factor of 2 instead of the correct 5 ÷ 3. Giving 200 miles adds only one extra hour's distance, 50, instead of the two extra hours actually needed (150 + 50 = 200, rather than 150 + 100). Giving 90 miles divides by the scale factor instead of multiplying (150 × 3 ÷ 5 = 90).
- (c) 72° — Method: opposite angles in a cyclic quadrilateral always sum to 180°. Working: angle DAB and angle BCD are opposite angles of the cyclic quadrilateral ABCD, so angle BCD = 180 − 108 = 72 degrees. Answer: 72°. Opposite angles in a cyclic quadrilateral are SUPPLEMENTARY, not equal, so do not simply copy the given angle; and do not subtract from 360°, which is the rule for angles round a point, or confuse this with the angle-in-a-semicircle theorem, which gives a fixed 90° that has nothing to do with this quadrilateral.
- (b) k = 6 — Method: two simultaneous linear equations have no solution when the lines they describe are parallel, so write each equation in the form y = mx + c and make the gradients equal. Working: kx + 2y = 4 rearranges to y = −(k/2)x + 2, so its gradient is −k/2, and 3x + y = 5 rearranges to y = −3x + 5, so its gradient is −3; setting −k/2 = −3 gives k = 6, and the first equation is then 6x + 2y = 4, which simplifies to 3x + y = 2 and can never agree with 3x + y = 5. Answer: k = 6. The distractors: k = −6 comes from reading the gradient of kx + 2y = 4 as +k/2 and solving k/2 = −3; k = 3 comes from making the x terms identical instead of making the gradients equal; k = 2/3 comes from writing the gradient of 3x + y = 5 upside down as −1/3 and solving −k/2 = −1/3.
- (c) x² − 2x − 15 ≥ 0 — The critical values are x = −3 and x = 5, so the quadratic factorises as (x + 3)(x − 5). Expanding: (x + 3)(x − 5) = x² − 2x − 15. Since the solution set is OUTSIDE the roots (x ≤ −3 or x ≥ 5), the quadratic must be ≥ 0 there, since a positive U-shape sits above the axis outside its roots. So the inequality is x² − 2x − 15 ≥ 0. Distractor routes: x² + 2x − 15 ≥ 0 comes from factorising as (x − 3)(x + 5), swapping the sign of each root when forming the brackets. x² − 2x − 15 ≤ 0 keeps the correct expansion but uses ≤ 0, which gives the region between the roots instead of outside them. x² − 8x + 15 ≥ 0 comes from using roots x = 3 and x = 5, dropping the negative sign on −3 before expanding.
How the 20 questions are shared out
- Number — 3 questions (15% of the qualification)
- Algebra — 6 questions (30% of the qualification)
- Ratio, proportion and rates of change — 4 questions (20% of the qualification)
- Geometry and measures — 4 questions (20% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.