Sample paper · GCSE Higher · grades 4–9
GCSE Higher sample Paper 1 (non-calculator)
The real Paper 1 is 1.5 hour 30 minutes and 80 marks, non-calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Higher qualification — number 15%, algebra 30%, ratio, proportion and rates of change 20%, geometry and measures 20%, probability 7.5%, statistics 7.5% — with no calculator-only items. AO1 / AO2 / AO3 at this tier: 40% / 30% / 30%.
Non-calculatorGCSE Higher
Answer key: GCSE Higher sample Paper 1 (non-calculator)
MathsUKwww.geekhero.co.uk
- (d) 0.3 — Converting the fractions to decimals, 1/4 = 0.25 and 2/5 = 0.4, so any decimal between 0.25 and 0.4 is a valid answer, and 0.3 fits. Confusing 1/4 with 1/5 and converting it as 0.2 instead of 0.25 gives a value below the true lower bound. Confusing 2/5 with 1/2 and converting it as 0.5 instead of 0.4 gives a value above the true upper bound. Converting the fractions correctly but choosing a decimal above the true upper bound of 0.4 instead of between the two values gives 0.45.
- (d) x = 5 — Method: expand the bracket by multiplying both terms inside it by 5, then undo the addition and the multiplication in turn. Working: expanding gives 5x + 15 = 40; subtracting 15 from both sides gives 5x = 25; dividing both sides by 5 gives x = 5. Answer: x = 5. The distractors: x = 8 comes from dividing both sides by 5 first, reaching x + 3 = 8 and writing 8 as the value of x without taking the 3 away; x = 11 comes from adding 15 to both sides instead of subtracting it, giving 5x = 55; x = 7.4 comes from expanding 5(x + 3) as 5x + 3, multiplying only the x by the 5, which leads to 5x = 37.
- (d) 3/5 — Convert both times to minutes: 2 hours 15 minutes = 135 minutes; 3 hours 45 minutes = 225 minutes. Put the train time over the bus time: 135/225. Divide both numbers by their highest common factor, 45: 135÷45 = 3, 225÷45 = 5, giving 3/5. (5/3 comes from writing the times the wrong way round. 2/5 comes from finding the difference, 225 − 135 = 90 minutes, and writing it as a fraction of the bus time, 90/225. 3/8 comes from comparing the train time to the total time for both journeys, 135/360.)
- (a) Parallel, since both gradients are 2 — Gradient of line 1 = (5 − 1) ÷ (2 − 0) = 4 ÷ 2 = 2. Gradient of line 2 = (6 − 2) ÷ (5 − 3) = 4 ÷ 2 = 2. The two gradients are equal, so the lines are parallel. "Not parallel, since the gradients are 2 and 4" uses 4 for line 2, which comes from dividing the change in y, 4, by 1 rather than by the change in x, 5 − 3 = 2. "Not parallel, since the two lines cross the y-axis at different points" confuses parallel lines with the same line repeated — parallel lines are distinct lines, and where a line crosses the y-axis has no effect on its gradient. "Parallel, since both lines pass through positive coordinates" reaches the right conclusion for the wrong reason: lines are parallel because their gradients are equal, not because the coordinates given happen to be positive.
- (a) 12/25 — P(red then blue) = 4/10 × 6/10 = 24/100. P(blue then red) is the same, 6/10 × 4/10 = 24/100. Since either order counts as different colours, add them: 24/100 + 24/100 = 48/100 = 12/25. Working out only one order, red-then-blue, and forgetting blue-then-red, gives 24/100 = 6/25. Working out the probability that the two counters are the SAME colour instead — 4/10 × 4/10 + 6/10 × 6/10 = 16/100 + 36/100 = 52/100 = 13/25 — answers a different question. Using 6/9 for the second draw, as if the first counter were not replaced, gives 2 × (4/10 × 6/9) = 48/90 = 8/15.
- (b) 1 — Method: for data in a frequency table, find the position of the median using (n + 1) ÷ 2, then read off the value at that position from the cumulative frequencies. Working: there are 19 pupils, so the median is the 10th value. The cumulative frequencies are 7 (up to 0 pets), 10 (up to 1 pet), 14 (up to 2 pets) and 19 (up to 3 pets). The 10th value falls at the end of the '1 pet' group, so the median is 1 pet. Giving 0 pets is the mode — the category with the highest frequency, 7 — not the median. Giving 3, the highest number of pets minus the lowest, finds the range, a different statistic entirely. Giving 19 states the total number of pupils, not a number of pets at all. Find the middle POSITION first, then read off the value it belongs to — do not confuse it with the mode, the range or the total.
- (c) 6 — 2 × 3 = 6, then 36 ÷ 6 = 6. Ignoring the brackets and working left to right gives 36 ÷ 2 = 18, then 18 × 3 = 54. Multiplying by the bracket instead of dividing by it gives 2 × 3 = 6, then 36 × 6 = 216. Dividing by only the 2 inside the bracket, and ignoring the × 3, gives 36 ÷ 2 = 18.
- (c) Week 16, £37,000 — y = f(x − 6) − 8000 combines a horizontal translation of 6 units RIGHT (subtracting 6 inside the brackets) with a vertical translation of £8000 DOWN (subtracting 8000 outside). Applying both to the maximum (10, 45000): 10 + 6 = 16, so the new maximum is in week 16. And 45000 − 8000 = 37000, so the maximum weekly profit is £37,000.
- (c) L = d/5 — The scale 1 : 20 means each cm on the drawing represents 20 cm in real life, so the real length in cm is 20d. Converting to metres by dividing by 100: L = 20d/100 = d/5.
- (c) AB means the segment or its length, shown by context — Method: recall the standard convention for a two-letter label such as AB. Working: AB names the segment AND its length; the sentence around it shows which is meant — 'draw AB' means the segment, 'AB = 5 cm' means the length. Options: 'a different symbol is needed' and 'must be written as |AB|' both describe stricter rules than the convention GCSE actually uses; 'AB can only mean the segment' ignores that the same label is also used for the length. Answer: AB means the segment or its length, shown by context.
- (c) 47 — Method: fill the first pair of branches of the frequency tree, then the failures on each branch, then add only the failing end branches. Working: 70% of 200 is 140, so 140 cars were more than 3 years old and 200 − 140 = 60 cars were 3 years old or less. One quarter of the older cars failed: 140 ÷ 4 = 35. The newer branch gives 12 failures. Adding the two failing branches gives 35 + 12 = 47. Answer: 47 of the cars failed the test. The distractors: 35 is the older branch on its own, with the 12 newer failures never added; 62 comes from taking 1 in 4 of all the cars, 200 ÷ 4 = 50, and then adding the 12; 153 is 200 − 47 and counts the cars that passed.
- (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
- (c) 90° — The graph of y = tan x has a vertical asymptote at x = 90°, the smallest positive value for which it is undefined. tan 0° = 0, a defined value, not an undefined one — confusing where the graph equals zero with where it is undefined gives 0°. x = 270° is also a value where y = tan x is undefined, but it is not the smallest positive one, since 90° comes first. tan 45° = 1, a defined value — confusing the asymptote with the angle at which tan x = 1 gives 45°.
- (a) 70 km/h — Method: average speed for a whole journey is the total distance divided by the total time, not the mean of the separate speeds. Working: 3 × 80 = 240 km and 1 × 40 = 40 km, giving 280 km in 3 + 1 = 4 hours, so 280 ÷ 4 = 70. Answer: 70 km/h. The distractors: 60 km/h comes from taking the mean of 80 and 40, which would only be right if equal times were spent at each speed; 280 km/h is the total distance written with a speed unit, from forgetting to divide by the total time; 80 km/h comes from quoting the speed of the longer leg as the average for the whole journey.
- (c) 115 — Method: use corresponding angles to carry the 65° angle from the lower rafter up to the upper rafter, then use angles on a straight line to move to the other side of the strut. Working: the angle above the upper rafter and to the left of the strut corresponds to the given angle, so it is 65°; the angle above the upper rafter and to the right of the strut lies on a straight line with it, so it is 180 − 65 = 115. Answer: 115°. A candidate who assumes the angle stays 65° without allowing for the move from the left of the strut to the right of it gives 65. A candidate who uses 90° instead of 180°, working out 90 − 65, gets 25. A candidate who adds instead of subtracting, working out 180 + 65, gets 245.
- (a) 1 — Method: the value of y when x = 0 is where the line meets the y-axis, which is the constant c in y = mx + c, so the gradient is worked out from the two given points first and the constant follows by substituting one of them. Working: m = (16 − 7) ÷ (5 − 2) = 9 ÷ 3 = 3, so the line is y = 3x + c; substituting x = 2 and y = 7 gives 7 = 3 × 2 + c, so c = 7 − 6 = 1, and the value of y when x = 0 is that constant. Answer: 1. The distractors: 3 comes from stopping at the gradient and offering it as the intercept; 4 comes from stepping back from x = 2 to x = 0 by one unit of x instead of two, 7 − 3 = 4; −1 comes from working the constant out as mx − y, 3 × 2 − 7 = −1, instead of y − mx.
- (b) 20 — The gradient is the change in p divided by the change in t: (90 − 30) ÷ (5 − 2) = 60 ÷ 3 = 20. Choosing 0.05 comes from dividing the change in t by the change in p, the wrong way round (3 ÷ 60). Choosing −20 comes from subtracting the coordinates in the wrong order for one part of the calculation, for example (30 − 90) ÷ (5 − 2), giving a negative value. Choosing 18 comes from dividing the second p-coordinate by the second t-coordinate directly (90 ÷ 5) instead of using the change between the two points.
- (a) Triangular prism — Count the given properties against each solid. A triangular prism has 5 faces (2 triangular ends + 3 rectangular sides), 9 edges and 6 vertices — this matches exactly, so the solid is a triangular prism. A square-based pyramid also has 5 faces, but 8 edges and 5 vertices, and only one face is a square rather than three rectangles — the edge and vertex counts don't match. A cuboid has 6 faces, 12 edges and 8 vertices, none of which match the numbers given. A tetrahedron has 4 faces, all triangles, with 6 edges and 4 vertices — too few faces, and no rectangular faces at all.
- (b) 235 litres — The flow rate at t = 10 is the gradient of the tangent: change in volume ÷ change in time = (190 − 130) ÷ (12 − 8) = 60 ÷ 4 = 15 litres per minute. Treating this rate as roughly constant for a short interval, the volume 5 minutes after t = 10 is estimated as 160 + 5 × 15 = 235 litres. Using the tangent's own point spacing — 2 minutes, from t = 10 to t = 12 — instead of the 5 minutes actually asked for gives 160 + 2 × 15 = 190, which is just the volume already given at one of the tangent's own points, not an answer to the question asked. Multiplying the gradient by the time WITHOUT adding the starting volume, 5 × 15 = 75, forgets that a rate estimates a CHANGE, which must be added to the starting volume, not given as the answer on its own. Subtracting instead of adding, 160 − 5 × 15 = 85, extrapolates backward in time rather than forward.
- (a) −8 — −f(x) means take the output value from the table and change its sign, without changing which x-value is looked up. From the table, f(1) = 8, so −f(1) = −8. Reading f(1) = 8 from the table but forgetting to apply the negative sign gives 8. Misreading the row and using f(0) = 5 instead of f(1) = 8, then negating it, gives −5. Confusing −f(x) with f(x) − 1 — taking f(1) = 8 and subtracting 1 instead of negating — gives 7.
How the 20 questions are shared out
- Number — 3 questions (15% of the qualification)
- Algebra — 6 questions (30% of the qualification)
- Ratio, proportion and rates of change — 4 questions (20% of the qualification)
- Geometry and measures — 4 questions (20% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.