Sample paper · GCSE Higher · grades 4–9
GCSE Higher sample Paper 2 (calculator)
The real Paper 2 is 1.5 hour 30 minutes and 80 marks, calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Higher qualification — number 15%, algebra 30%, ratio, proportion and rates of change 20%, geometry and measures 20%, probability 7.5%, statistics 7.5% — with a calculator allowed. AO1 / AO2 / AO3 at this tier: 40% / 30% / 30%.
CalculatorGCSE Higher
Answer key: GCSE Higher sample Paper 2 (calculator)
MathsUKwww.geekhero.co.uk
- (a) 18 minutes — Method: the buses leave together again after a number of minutes that is a multiple of both intervals, and the first such time is the lowest common multiple. Working: the multiples of 6 are 6, 12, 18, 24 … and the multiples of 9 are 9, 18, 27 … The first value in both lists is 18, which is 6 × 3 and 9 × 2. Answer: 18 minutes. The distractors: 54 minutes comes from multiplying 6 by 9, which does give a common multiple but not the lowest one; 3 minutes is the highest common factor of 6 and 9 rather than their lowest common multiple; 15 minutes comes from adding the two intervals together.
- (b) Student B's — narrower strips fit the curve more closely. — The trapezium rule replaces the curve with straight-line segments; the narrower each strip, the more closely its straight edge follows the curve, so Student B's estimate with 8 narrower strips is more likely to be closer to the true area. Reasoning from the number of arithmetic steps rather than from how well the straight lines fit the curve gives the wrong claim that Student A makes fewer rounding errors. Believing the trapezium rule is exact, rather than an estimate that improves with narrower strips, gives the wrong claim that the two are always the same. Believing wider strips smooth out the curve better, rather than following it less closely, gives the wrong claim in favour of Student A's wider strips.
- (d) 135 m² — Method: for area, the scale factor must be squared. Working: area scale = 300² = 90 000. 15 × 90 000 = 1,350,000 cm². Convert to m² by dividing by 10 000: 1,350,000 ÷ 10 000 = 135 m². Wrong options: 0.45 m² comes from using the linear scale factor (×300) instead of squaring it; 1,350,000 m² comes from forgetting to convert the answer from cm² to m²; 13,500 m² comes from dividing by 100 instead of 10 000 when converting units.
- (c) No — 50° is angle P, not between PQ and QR. — Method: 1/2ab sin C only gives the area when C is the angle between the two named sides. Working: PQ and QR meet at vertex Q, so the angle between them is angle PQR, not angle QPR (which is the angle at vertex P, between sides PQ and PR). Since angle QPR is not included between PQ and QR, the student's calculation 1/2 × 8 × 11 × sin 50° does not give the area of the triangle — the verdict is No. Claiming that any angle works with any two sides ignores that the formula is only true for the INCLUDED angle. Claiming the formula needs all three sides is a different, incorrect statement about the formula itself — Area = 1/2ab sin C is valid with exactly two sides and their included angle, when that angle is actually known.
- (d) 15/64 — Method: because the first marble is put back, the second draw is made from the same 8 marbles, so the two draws are independent and their probabilities are multiplied. Working: the bag holds 8 marbles both times, so yellow first has probability 5/8 and blue second has probability 3/8. Multiplying fractions gives 5 × 3 = 15 on the top and 8 × 8 = 64 on the bottom. Answer: the probability is 15/64. The distractors: 9/64 comes from working out the probability that BOTH marbles are blue, 3/8 × 3/8, instead of one of each colour in the stated order; 15/16 comes from multiplying the numerators but adding the denominators; 5/8 comes from writing down the first draw only and never combining it with the second.
- (d) 3 — Method: the height of a bar is its frequency density, frequency ÷ class width, so work out both heights and divide one by the other. Working: the class 0 ≤ t < 4 is 4 minutes wide and holds 30 visits, so its frequency density is 30 ÷ 4 = 7.5 per minute; the class 4 ≤ t < 20 is 16 minutes wide and holds 40 visits, so its frequency density is 40 ÷ 16 = 2.5 per minute; dividing the heights, 7.5 ÷ 2.5 = 3. Answer: the first bar is 3 times as tall. The distractors: 0.75 comes from comparing the frequencies, 30 ÷ 40, as though the frequencies were the heights, which is the mistake the unequal widths are there to expose; 4 comes from comparing the class widths, 16 ÷ 4, instead of the heights; 5 comes from subtracting the two frequency densities, 7.5 − 2.5, which answers how much taller rather than how many times taller.
- (b) £96.90 — Method: multiply the number of units by the cost per unit, then convert the result from pence to pounds. Working: 340 × 28.5p = 9690p; converting to pounds, 9690p ÷ 100 = £96.90. Answer: £96.90. £969.00 comes from misplacing the decimal point when converting pence to pounds, dividing by 10 instead of 100. £9.69 comes from misplacing the decimal point the other way, dividing by 1000 instead of 100. £102.00 comes from rounding the rate to 30p per unit before multiplying.
- (c) 3 and 2n + 5 are both factors of 6n + 15 — Factors are the parts multiplied together to make an expression; terms are the parts added together. In 3(2n + 5) the 3 and the bracket 2n + 5 are multiplied, so both of them are factors of 6n + 15. The parts added together are 6n and 15, and those are its two terms, not its factors. A factor need not be a number: a bracket containing letters is a factor in exactly the same way.
- (a) 42 — Find the value of one part: 18 ÷ 3 = 6. Find the number of dogs: 4 × 6 = 24. Add the cats and the dogs to find the total: 18 + 24 = 42. (24 is the number of dogs only, not the total number of animals. 126 comes from multiplying the number of cats by the total number of parts, 18 × 7, instead of finding one part first. 25 comes from adding the ratio numbers 3 and 4 directly to the number of cats.)
- (b) 4 : 9 — The heights are in the ratio 4 : 6, which simplifies to 2 : 3. For similar solids, area scales with the square of the length ratio, so the surface area ratio is 2² : 3² = 4 : 9. 2 : 3 is just the simplified length ratio, before squaring has been done. 8 : 27 comes from cubing the ratio (2³ : 3³) instead of squaring it — that's the rule for volumes, not areas. 9 : 4 has the correct squared values but in the wrong order, giving the larger tin's area first instead of the smaller.
- (b) 10 — Method: A′ means everything in the universal set that is NOT in A, so n(A′) = n(universal set) − n(A). Working: the universal set has 15 elements. A = {3, 6, 9, 12, 15}, so n(A) = 5. n(A′) = 15 − 5 = 10. Answer: 10. Watch out: writing down 5 gives n(A) itself, the size of the multiples-of-3 set, which is the opposite of its complement. Writing down 11 comes from missing 15 off the list of multiples of 3, treating A as only {3, 6, 9, 12}, so A is undercounted as 4 and A′ is overstated as 15 − 4. And writing down 12 comes from only listing the multiples of 3 up to 9 — 3, 6 and 9 — and missing that 12 and 15 also belong to A, undercounting A as 3 rather than 5.
- (b) 3/5 — Method: add all three parts for the total, add together the parts that are not green, then write this over the total. Working: total parts = 4 + 5 + 6 = 15. Not green = 4 + 5 = 9. Fraction = 9/15 = 3/5. Answer: 3/5. 2/5 comes from finding the fraction that IS green (6/15 = 2/5) instead of not green. 4/15 comes from only counting the red baubles as 'not green' and forgetting the gold ones. 9/10 comes from adding only two of the three ratio parts to find the total (4+6=10), missing out the gold part, while still using 9 for the numerator.
- (d) x = −2, y = −5 — 3x² + 12x + 7 rewrites as 3(x² + 4x) + 7, then as 3[(x + 2)² − 4] + 7, which simplifies to 3(x + 2)² − 5, since −3 × 4 + 7 = −5. Substituting x = −2: 3 × (−2)² = 12, 12 × (−2) = −24, so 12 − 24 + 7 = −5, confirming the minimum value −5 at x = −2: turning point x = −2, y = −5. Halving b instead of halving b/a — using −4 as the shift instead of −2 — lands on turning point x = −4, y = −41, which is wrong because when a ≠ 1 the shift inside the bracket is b/(2a), not b/a alone. Reading the bracket's sign directly as the turning point's x-coordinate gives x = 2, y = −5 — wrong, because (x + 2)² is zero at x = −2, not x = 2. Computing 12 − 7 = 5 instead of 7 − 12 = −5 flips the sign of the constant, giving x = −2, y = 5 — wrong, since the completed square's constant must be evaluated as 7 minus 12, not 12 minus 7. Whenever a ≠ 1, factor a out of the x² and x terms first, and always check a turning point by substituting back into the original equation.
- (d) 400 — The area scale factor is the length scale factor squared: 20² = 400, so the real car's surface area is 400 times the model's. 20 comes from using the length scale factor itself, without squaring it. 8000 comes from cubing the length scale factor (20³), instead of squaring it — cubing is the rule for volume, not area. 40 comes from doubling the length scale factor (2 × 20), instead of squaring it.
- (a) 69.3 m — Method: each observer gives a right-angled triangle with the mast as the opposite side, so tan θ = 60 ÷ distance and the distance from the foot of the mast is 60 ÷ tan θ; because both stand on the same side, the gap between them is the difference of those two distances. Working: from Amelia, 60 ÷ tan 30° = 103.92… m; from Noah, 60 ÷ tan 60° = 34.64… m; the gap is 103.92… − 34.64… = 69.28… m, which is 69.3 m to 1 decimal place. Answer: 69.3 m. The distractors: 103.9 m is Amelia's own distance from the foot of the mast, written down before the second distance has been taken away; 34.6 m is Noah's distance from the foot of the mast; 138.6 m comes from adding the two distances, which would be right only if the two observers stood on opposite sides of the mast.
- (d) 3x² + 4x − 7 — Method: the minus sign in front of the second bracket changes the sign of every term inside it; then collect like terms. Working: removing the brackets gives 5x² + 3x − 2 − 2x² + x − 5; the squared terms give 5x² − 2x² = 3x², the x terms give 3x + x = 4x, and the number terms give −2 − 5 = −7. Answer: 3x² + 4x − 7. The distractors: 7x² + 2x + 3 comes from adding the two brackets instead of subtracting, giving 5x² + 2x², 3x − x and −2 + 5; 3x² + 2x + 3 comes from applying the minus sign to 2x² only, leaving −x and +5 unchanged so that 3x − x = 2x and −2 + 5 = 3; 3x² + 4x + 3 comes from changing the signs of the terms with letters but leaving +5 as it stood, so the number terms give −2 + 5 = 3.
- (c) £338.69 — To increase by 12% each year, multiply by 1.12 twice. £270 × 1.12 × 1.12 = £338.688, which rounds to £338.69 (nearest penny, since the third decimal place is 8). £334.80 comes from treating the two 12% increases as a single flat 24% increase applied once instead of compounding: £270 × 1.24 = £334.80. £302.40 comes from applying the 12% increase only once, for 1 year instead of 2: £270 × 1.12 = £302.40. £338.68 comes from rounding £338.688 down to the nearest penny instead of up.
- (a) 10 cm — Sector area is (angle ÷ 360) × π × radius². Here 90 ÷ 360 = 1/4, and 1/4 × 3.14 = 0.785, so radius² is 78.5 ÷ 0.785 = 100, and the radius is √100 = 10 cm. Stopping after finding radius² and not taking the square root gives 100 cm. Treating 78.5 as the area of the WHOLE circle, ignoring the 90° fraction, gives radius² = 78.5 ÷ 3.14 = 25, so a radius of 5 cm. Correctly finding a radius of 10 cm but then doubling it, mistaking the question for asking the diameter, gives 20 cm.
- (a) (4, 1) — y = −f(x) reflects the graph of y = f(x) in the x-axis: every point (x, y) maps to (x, −y). Applying this to (4, −1): the x-coordinate stays 4, and the y-coordinate −1 becomes its negative, 1. Leaving the y-coordinate unchanged skips the reflection entirely, giving (4, −1); reflecting the x-coordinate instead, or reflecting both, mixes this up with a reflection in the y-axis or a rotation, giving (−4, −1) or (−4, 1).
- (b) x = 5 — Area = length × width, so x(x + 3) = 40, which rearranges to x² + 3x − 40 = 0. This factorises as (x + 8)(x − 5) = 0: the two numbers in the brackets must multiply to −40 and add to +3, and the pair 8 and −5 does both. This gives x = −8 or x = 5. Since x is a length, it cannot be negative, so x = 5. A candidate who gives both solutions without rejecting the negative one, which cannot be a length, answers x = 5 or x = −8. A candidate who picks the wrong factor pair of 40, such as 10 and −4 instead of 8 and −5, gets (x + 10)(x − 4) = 0 and answers x = 4. A candidate who rejects the wrong root, keeping the negative solution instead of the positive one, answers x = −8.
How the 20 questions are shared out
- Number — 3 questions (15% of the qualification)
- Algebra — 6 questions (30% of the qualification)
- Ratio, proportion and rates of change — 4 questions (20% of the qualification)
- Geometry and measures — 4 questions (20% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.