Sample paper · GCSE Higher · grades 4–9
GCSE Higher sample Paper 2 (calculator)
The real Paper 2 is 1.5 hour 30 minutes and 80 marks, calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Higher qualification — number 15%, algebra 30%, ratio, proportion and rates of change 20%, geometry and measures 20%, probability 7.5%, statistics 7.5% — with a calculator allowed. AO1 / AO2 / AO3 at this tier: 40% / 30% / 30%.
CalculatorGCSE Higher
Answer key: GCSE Higher sample Paper 2 (calculator)
MathsUKwww.geekhero.co.uk
- (d) 6 — Method: the square root of a product can be found either by multiplying first and then rooting, or by rooting each factor and multiplying the two roots together. Working: 4 × 9 = 36, and 6 × 6 = 36, so the root is 6; the same value comes from √4 × √9 = 2 × 3. Answer: 6. The distractors: 36 comes from multiplying inside the root and then leaving the root untaken; 5 comes from rooting each factor and adding the results, 2 + 3, instead of multiplying them; 18 comes from rooting the 4 only and leaving the 9 untouched, giving 2 × 9.
- (b) No, because their gradients are 2 and −2 — Method: two lines are parallel exactly when their gradients are equal as signed numbers, so m is read from each equation written in the form y = mx + c and the two are compared. Working: y = 2x + 1 has gradient 2 and y = −2x + 3 has gradient −2; those are not equal, so the lines are not parallel, and indeed one slopes upwards while the other slopes downwards. Answer: No, because their gradients are 2 and −2. The distractors: saying yes because both gradients have size 2 comes from comparing the sizes of the gradients and ignoring their signs; saying yes because the gradients add to 0 comes from using a sum of zero as the test for parallel lines instead of equality of gradients; saying no because the y-intercepts are 1 and 3 reaches the right verdict by the wrong route, since the intercepts decide where the lines sit rather than whether they are parallel.
- (a) 8 cm — Method: a scale of 1 : n means the real distance is n times the distance on the map, so to go from the real distance back to the map distance, put both lengths in the same unit and then divide by the scale. Working: 1 km = 100 000 cm, so 8 km = 8 × 100 000 = 800 000 cm; 800 000 ÷ 100 000 = 8. Answer: 8 cm. The distractors: 800000 cm comes from converting the 8 km into centimetres and stopping there, so the division by the scale — the inverse operation the question asks for — is never done; 80 cm comes from taking a metre to be 1000 cm, which turns 8 km into 8 × 1000 × 1000 = 8 000 000 cm and gives 8 000 000 ÷ 100 000 = 80; 0.08 cm comes from taking a kilometre to be 1000 cm, which turns 8 km into 8000 cm and gives 8000 ÷ 100 000 = 0.08.
- (d) 110.1° — Method: the largest angle in any triangle faces the longest side, so identify that angle first and then use the cosine rule rearranged as cos A = (b² + c² − a²) ÷ 2bc. Working: the longest side is AC = 12.8 cm, which is faced by angle ABC, and the two sides meeting at B are 6.4 cm and 9.1 cm, so cos ABC = (6.4² + 9.1² − 12.8²) ÷ (2 × 6.4 × 9.1) = (40.96 + 82.81 − 163.84) ÷ 116.48 = −40.07 ÷ 116.48 = −0.34401. A negative cosine means an obtuse angle, and the inverse cosine of −0.34401 is 110.12°. Answer: the largest angle is 110.1° to 1 decimal place. The distractors: 28.0° is the angle facing the shortest side, chosen by a candidate who thinks the largest angle sits opposite the smallest side; 69.9° comes from dropping the minus sign and using cos = 0.34401, which turns the obtuse angle into its supplement; 81.4° comes from assuming the angles share out 180° in the same ratio as the sides, 180 × 12.8 ÷ 28.3, which is not how a triangle behaves.
- (c) 24 — Silver, bronze and copper cover every counter, so their probabilities sum to 1: P(copper) = 1 − 1/2 − 1/8 = 3/8. Number of copper counters = 3/8 × 64 = 24. Multiplying the silver probability by 64 gives 32, the number of silver counters, not copper. Multiplying the bronze probability by 64 gives 8, the number of bronze counters. Adding the silver and bronze probabilities (1/2 + 1/8 = 5/8) and multiplying by 64 gives 40, the combined number of silver and bronze counters, not the copper count.
- (c) 10 — Method: work out the mean that can be found straight away, then use total = mean × number of values on the group of three to find the missing number. Working: the mean of 15 and 25 is (15 + 25) ÷ 2 = 40 ÷ 2 = 20, so the group of three must also have a mean of 20; three numbers with a mean of 20 have a total of 20 × 3 = 60, and 20 + 30 = 50 of that total is already accounted for, so x = 60 − 50 = 10. Answer: 10, and checking, (10 + 20 + 30) ÷ 3 = 20. The distractors: 20 comes from working out the mean the two groups share and writing that down as x; −10 comes from dividing the group of three by 2 instead of by 3, which gives x + 50 = 40; 70 comes from reading the total 15 + 25 = 40 as the mean of the pair, which sets the target total at 120 and leaves x = 70.
- (c) 27 — Each of the 3 digits can be chosen independently for each of the 3 positions, so multiply: 3 × 3 × 3 = 27. 9 comes from multiplying only two of the three positions, 3 × 3, and forgetting the third. 6 comes from working out 3 × 2 × 1 = 6, which counts codes where digits do not repeat, but the question allows repeated digits. 3 comes from considering only one digit position.
- (a) P = 100I / (RT) — Method: undo the operations done to P in reverse order — multiply by 100, then divide by R and by T. Working: I = PRT/100, so 100I = PRT, so P = 100I / (RT). Answer: P = 100I / (RT). P = IRT/100 comes from leaving R and T in the numerator instead of moving them to the denominator. P = 100RT/I comes from swapping P and I when rearranging. P = 100I/R comes from dividing by R only and forgetting to also divide by T.
- (b) 75 g — Method: split the total mass into the number of parts shown by the ratio, then find the mass of tin. Working: the ratio 7:3 has 7 + 3 = 10 parts, so one part is 250 ÷ 10 = 25 g, and the mass of tin is 3 × 25 = 75 g. So the alloy contains 75 g of tin. Distractor 175 g is the mass of copper, not tin. Distractor 125 g comes from splitting the alloy into two equal halves, ignoring the ratio. Distractor 25 g is the value of one part, found correctly but never multiplied by 3.
- (c) 15/17 — Method: cos θ = adjacent ÷ hypotenuse, so find the hypotenuse with Pythagoras' theorem first and then decide which short side is next to θ. Working: the hypotenuse is √(8² + 15²) = √(64 + 225) = √289 = 17 cm. The angle θ is opposite the 8 cm side, so the side next to it is the 15 cm side, and cos θ = 15 ÷ 17. Answer: 15/17. The distractors: 8/17 is sin θ, opposite over hypotenuse, used in place of the cosine; 8/15 is tan θ, opposite over adjacent; 17/15 comes from writing the cosine ratio upside down, as hypotenuse over adjacent.
- (a) 4/9 — There are 3 × 6 = 18 equally likely outcomes. The product is a multiple of 5 whenever Spinner C shows 5, whatever Spinner D shows, which is 6 outcomes, or whenever Spinner D shows 5 and Spinner C shows 2 or 3, which is 2 more outcomes. This gives 6 + 2 = 8 outcomes, so the probability is 8/18 = 4/9. Choosing 1/3 comes from only counting the 6 outcomes where Spinner C shows 5 and forgetting the 2 outcomes where Spinner D shows 5 instead. Choosing 1/9 comes from only counting the 2 outcomes where Spinner D shows 5 and forgetting the 6 outcomes where Spinner C shows 5. Choosing 1/2 comes from counting 9 outcomes instead of 8, by listing the case where Spinner C shows 5 and Spinner D shows 5 twice over.
- (c) 0.5, 0.45, −0.09, −0.15, −0.6 — Method: compare the decimals by their position on a number line, remembering that with negative decimals the one closer to zero is larger. Working: 0.5 and 0.45 are positive, so they come first, with 0.5 the larger of the two. Among the negatives, −0.09 is closest to zero, then −0.15, then −0.6 is furthest from zero and so the smallest. Answer: 0.5, 0.45, −0.09, −0.15, −0.6. 0.5, 0.45, −0.15, −0.09, −0.6 swaps −0.09 and −0.15, treating the negative decimal with more digits after the point as closer to zero. −0.6, −0.15, −0.09, 0.45, 0.5 lists the numbers from smallest to largest instead of largest to smallest. 0.5, 0.45, −0.6, −0.15, −0.09 orders the negative decimals by the size of the digit (0.6 > 0.15 > 0.09) as if they were positive, instead of recognising that a bigger negative decimal is further from zero and so smaller.
- (d) 16 boys and 14 girls — Method: write the number of boys in terms of the number of girls, then use the total for the class. Working: if there are g girls then there are g + 2 boys, so g + (g + 2) = 30, that is 2g + 2 = 30, so 2g = 28 and g = 14; the number of boys is 14 + 2 = 16. Answer: 16 boys and 14 girls, which total 30 and differ by 2. The distractors: 14 boys and 16 girls comes from substituting for the wrong group, writing b + (b + 2) = 30 and then calling b the number of boys; 15 boys and 15 girls comes from halving 30 and never using the difference; 17 boys and 13 girls comes from adding the whole 2 to one half of the class and taking the whole 2 off the other half, which leaves a difference of 4.
- (b) No — rate fell by 3.7 thousand/month — Each tangent gradient is the instantaneous growth rate, in thousand subscribers per month. To compare them, subtract the later rate from the earlier one: 4.8 − 1.1 = 3.7. Since 1.1 is less than 4.8, the growth rate has fallen by 3.7 thousand subscribers per month, so the manager is wrong — the app is growing more slowly at 18 months, not faster. Subtracting the other way round and calling the result a rise, 'rate rose by 3.7 thousand/month', gets the direction backwards: the later gradient is the smaller of the two. Adding the two gradients, 4.8 + 1.1 = 5.9, and calling this a combined rate that shows speeding up, is the wrong operation for comparing two rates. Treating the difference 3.7 as a total number of subscribers lost, rather than a rate in thousands per month, confuses a rate with a count. Always subtract the two rates in a sensible order and keep the units in thousands per month.
- (a) 24 cm — The line from the centre to the midpoint of a chord is perpendicular to the chord, so triangle OMA has a right angle at M. By Pythagoras' theorem, AM² = OA² − OM² = 169 − 25 = 144, so AM = 12 cm. AB is twice AM, since M is the midpoint: AB = 2 × 12 = 24 cm. Finding AM = 12 cm correctly but forgetting to double it for the full chord gives 12 cm. Working out 169 − 25 = 144 and forgetting to take the square root gives 144 cm. Subtracting first and then doubling the wrong way, (13 − 5) × 2, gives 16 cm. Doubling AM after finding it correctly is the step that's missing from all three — do it, and you get 24 cm.
- (d) P lies outside the circle — The squared distance from the origin to P is 8² + 9² = 64 + 81 = 145, which is greater than 100, so P lies outside the circle. Choosing 'P lies inside the circle' comes from adding the coordinates directly (8 + 9 = 17) instead of squaring and adding them, and comparing 17 with 100. Choosing 'P lies on the circle' comes from squaring 9 incorrectly as 36 (as if it were 6²) instead of 81, giving 64 + 36 = 100, equal to the right-hand side. Choosing 'Cannot be determined' wrongly assumes the equation of the line itself is needed, when the radius and the distance from the origin to P are already enough.
- (b) 3 km — Method: multiply by the scale factor to get the real length in centimetres, then convert to kilometres. Working: 7.5 × 40 000 = 300 000 cm. 300 000 ÷ 100 000 = 3 km. Wrong options: 30 km comes from dividing by 10 000 instead of 100 000 when converting to kilometres; 3000 km comes from dividing by 100 instead of 100 000; 0.3 km comes from dividing by 1 000 000, an extra factor of 10 too many.
- (b) 10.5 — Method: multiply the drawing length by the scale factor to get the real length. Working: 7 cm × 1.5 = 10.5 m. A student who answers 8.5 has added the scale factor to the drawing length instead of multiplying (7 + 1.5). A student who answers 14 has rounded the scale factor up to 2 before multiplying. A student who answers 3.5 has divided the drawing length by 2 instead of multiplying it by 1.5. Answer: 10.5 m.
- (c) 14.1 — Method: in x² + y² = r² the right-hand side is the square of the radius, so take its square root to find the radius, then double the radius because the diameter is twice the radius. Working: r² = 50, so r = √50 = 7.07106…, and the diameter is 2 × 7.07106… = 14.14213…, which is 14.1 correct to 1 decimal place. Answer: 14.1. The distractors: 7.1 is the radius, worked out correctly but never doubled, so it answers a question about the radius rather than the diameter; 100.0 comes from doubling the 50 on the right-hand side, treating r² as though it were already the radius; 25.0 comes from halving the 50, treating r² as though it were already the diameter.
- (c) 2.61 — The limit L satisfies L = 12 ÷ (L + 2), so L(L + 2) = 12, giving L² + 2L − 12 = 0 and L = (−2 + √52) ÷ 2 = 2.6056, which is 2.61 to 2 decimal places (the early iterates 4, 2, 3, 2.4, 2.73, ... oscillate around this value before settling). Choosing 3.00 reads off x₃, one of the early oscillating values, before the sequence has settled close to the limit. Choosing 4.00 reads off x₁, the very first iterate, not the value the sequence approaches. Choosing 6.00 comes from writing the limit equation as L = 12 ÷ 2, leaving L itself out of the denominator.
How the 20 questions are shared out
- Number — 3 questions (15% of the qualification)
- Algebra — 6 questions (30% of the qualification)
- Ratio, proportion and rates of change — 4 questions (20% of the qualification)
- Geometry and measures — 4 questions (20% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.