Sample paper · GCSE Higher · grades 4–9
GCSE Higher sample Paper 2 (calculator)
The real Paper 2 is 1.5 hour 30 minutes and 80 marks, calculator, and all three papers carry equal weight. This sample is 20 original questions in the same content proportions as the Higher qualification — number 15%, algebra 30%, ratio, proportion and rates of change 20%, geometry and measures 20%, probability 7.5%, statistics 7.5% — with a calculator allowed. AO1 / AO2 / AO3 at this tier: 40% / 30% / 30%.
CalculatorGCSE Higher
Answer key: GCSE Higher sample Paper 2 (calculator)
MathsUKwww.geekhero.co.uk
- (a) 120 — There are 6 choices for the first digit. The second digit must be different from the first, leaving 5 choices, and the third digit must differ from both of the first two, leaving 4 choices. By the product rule, the number of codes is 6 × 5 × 4 = 120. Allowing every digit to repeat, ignoring the 'no digit twice' rule entirely, gives 6 × 6 × 6 = 216. Adding the number of choices at each position instead of multiplying them, 6 + 5 + 4, gives 15. Treating the three chosen digits as one unordered set, rather than as digits in a fixed order on the padlock, divides by the 3! = 6 ways of arranging them: 120 ÷ 6 = 20.
- (d) −3 — Method: rewrite the equation in the form y = mx + c, then read off the gradient. Working: y = 4 − 3x can be written as y = −3x + 4, so comparing with y = mx + c gives m = −3. Answer: the gradient is −3. The value 3 comes from ignoring the negative sign on the x term. The value 4 comes from reading off the y-intercept instead of the gradient. The value −4 comes from a sign error, applying the negative sign to the intercept instead of the gradient.
- (d) £30.00 — The gradient is (130 − 70) ÷ (5 − 2) = 60 ÷ 3 = £20 per hour. Using the point (2, 70): the cost for 2 hours at £20 per hour is 20 × 2 = £40, so the call-out fee is 70 − 40 = £30. Taking the C-value of the first point as the fee without subtracting the hourly cost gives £70.00 — but that point already includes 2 hours of the hourly rate. Using the gradient itself as the fee, £20.00, confuses the rate per hour with the fixed charge. Subtracting 20 × 3 = 60 instead of 20 × 2 = 40 (using the wrong h-value) gives 70 − 60 = £10.00.
- (b) 1 point — A rotation about a point P always leaves P itself unchanged, and — unless the shape has rotational symmetry about that exact point — no other point of the shape maps onto itself. The centre of rotation here is the vertex (2, 1), so exactly one point of the trapezium, that vertex, is invariant. Thinking that a rotation always has no invariant points ignores the centre of rotation itself, which is always fixed, and gives 0 points. Assuming every vertex of the shape is invariant confuses a rotation with the identity transformation and gives 4 points, the total number of vertices. Believing that the point diametrically opposite the centre is also fixed applies point symmetry of the whole coordinate grid rather than checking whether that point actually lies on this particular trapezium, and gives 2 points.
- (d) 5 — Being red and not being red are exhaustive, so their probabilities sum to 1: the probability of red is 1 − 0.8 = 0.2. The number of red counters is 0.2 × 25 = 5. Using 0.8 directly as the probability of red, without taking the complement, gives 0.8 × 25 = 20 — the number of counters that are NOT red. Sharing the 25 counters equally between the three colours, ignoring the given probability altogether, gives 25 ÷ 3 ≈ 8. Misreading the total as 20 counters instead of 25 gives 0.2 × 20 = 4.
- (b) 5 ≤ m < 10 — Method: with 60 values the median is the 60 ÷ 2 = 30th value in order, so build a running total until it first reaches 30. Working: the running totals are 22 after the first class, 22 + 20 = 42 after the second, 51 after the third, 56 after the fourth and 60 after the fifth; the 30th parcel is past 22 but not past 42, so it lies in the second class. Answer: the median lies in the class 5 ≤ m < 10. The distractors: 0 ≤ m < 5 comes from giving the class with the greatest frequency, 22, which is the modal class and not the median class; 10 ≤ m < 20 comes from choosing the middle class in the list of five instead of counting to the middle value; 20 ≤ m < 30 comes from halving the range of the data, 50 ÷ 2 = 25, and giving the class that contains 25 kg rather than the class that contains the 30th parcel.
- (c) 150 — Since 90 students represent 3 of the 5 equal parts, one part is 90 ÷ 3 = 30, and the whole year group is five parts: 30 × 5 = 150. Applying the fraction forwards to 90 instead of reversing it, 90 × 3/5 = 54, treats the given number as the whole rather than as three fifths of it. Finding one part correctly as 30 but forgetting to scale up to the whole year group leaves 30 as the final answer. Treating 90 as the whole year group and adding on 2/5 of 90 for the students who do not walk, 90 + (90 × 2/5) = 126, applies the missing fraction to the wrong base amount.
- (d) 28 — The height decreases by 8 cm at each bounce after the first, so the nth bounce reaches 60−(n−1)×8 cm. For the 5th bounce: 60−4×8=60−32=28. A candidate who subtracts 8 one time too many, five times instead of four, would compute 60−5×8=20. A candidate who adds the decrease instead of subtracting it, a sign error, would compute 60+4×8=92. A candidate who works out only the total decrease and forgets to include the starting height of 60 cm would compute just 5×8=40.
- (c) £450 — Method: use the equal ratios 4:5 = 200:x to find Grace's savings, then add the two amounts. Working: Noah's £200 is 4 parts, so one part is £200 ÷ 4 = £50; Grace has 5 parts, so 5 × £50 = £250; altogether £200 + £250 = £450. Answer: £450. The distractors: £250 is Grace's savings on their own, which is the middle step rather than the total the question asks for; £360 comes from reading £200 as the 5 parts instead of the 4, giving one part of £40 and a total of 9 × £40; £400 comes from doubling £200, which treats the two savings as equal and ignores the ratio altogether.
- (a) 8.1 m — Multiply the length on the plan by the scale factor: 4.5 × 1.8 = 8.1, so the real length is 8.1 m. Choosing 6.3 m adds the two numbers instead of multiplying them (4.5 + 1.8 = 6.3). Choosing 2.5 m divides the plan length by the scale factor the wrong way round (4.5 ÷ 1.8 = 2.5) instead of multiplying. Choosing 9.0 m rounds the scale factor up to 2 before multiplying (4.5 × 2 = 9.0), losing the accuracy the 1.8 was giving.
- (b) 5/12 — There are 36 equally likely ordered pairs. Listing the pairs where the red score is smaller than the blue score gives 15 outcomes, so the probability is 15/36 = 5/12. Choosing 1/2 comes from assuming the 36 outcomes split evenly between 'red smaller' and 'red bigger', which ignores the 6 outcomes where the two dice show the same score. Choosing 7/12 comes from including the outcomes where the two scores are equal, 15 + 6 = 21, giving 21/36 = 7/12, instead of using 'less than' strictly. Choosing 5/36 comes from counting only the outcomes where the two scores differ by exactly 1, such as (1, 2) and (2, 3), which is 5 outcomes, and missing the pairs that differ by more than 1.
- (a) 12 — Compare the powers of each prime that appears in both factorisations. In 2² × 3² and 2² × 3 × 7, the prime 2 appears with power 2 in both, and the prime 3 appears with power 2 in one and only power 1 in the other — take the lower power, 3¹. Multiplying the shared primes at their lower powers, 2² × 3, gives 12. Using power 1 for both primes instead of comparing the powers properly, 2 × 3, gives 6, which misses that 2 is common at power 2, not power 1. Multiplying the primes at their higher powers and including 7, which only appears in 84, gives 2² × 3² × 7, which comes to 252 — this is the lowest common multiple, not the highest common factor. Only spotting that 3 is a common prime and overlooking that 2 is common as well gives 3. So the highest common factor of 36 and 84 is 12.
- (c) x = 2, y = 3 — Method: no letter cancels straight away, so make one letter the subject of one equation and substitute that expression into the other. Working: 2x + y = 7 gives y = 7 − 2x, so x + 2y = 8 becomes x + 2(7 − 2x) = 8, that is x + 14 − 4x = 8, so −3x = −6 and x = 2; substituting back gives y = 7 − 4 = 3. Answer: x = 2, y = 3, which checks in 2 + 6 = 8. The distractors: x = 3, y = 2 comes from adding the equations to x + y = 5 and then subtracting them the wrong way round, writing x − y = 1 instead of x − y = −1; x = 2, y = 5 comes from substituting x = 2 into 2x + y = 7 as 2 + y = 7, dropping the coefficient; x = −2, y = 11 comes from dividing −3x = −6 as though two minus signs gave a negative answer.
- (a) 1/9 — The ratio copper : tin is 9:1, so write tin over copper: 1/9. (9/1 comes from writing the ratio the wrong way round, copper over tin. 1/10 comes from comparing the tin to the total mass of the alloy, 1 part out of 10. 9/10 comes from comparing the copper to the total mass of the alloy, 9 parts out of 10.)
- (a) a line parallel to both, 3 cm from each — Being equidistant from two parallel lines 6 cm apart means being exactly halfway between them all along their length, tracing out a third line, parallel to both, at 3 cm from each — half of the 6 cm gap. "a line parallel to both, 6 cm from each" repeats the full gap instead of halving it, which puts those points past one of the lines entirely. "a circle of radius 3 cm, centred midway" applies to a locus equidistant from a single fixed POINT, not from two parallel lines running the full length. "the perpendicular bisector of the gap" crosses the gap at right angles and meets each line at only one point — it is not the whole locus, which runs parallel to the lines, not across them.
- (b) (−5, −2) — Both points have the same y-coordinate, so the midpoint lies on the same horizontal line: y = −2. The x-coordinate is the average of −9 and −1: (−9 + (−1)) ÷ 2 = −10 ÷ 2 = −5, giving (−5, −2). (−10, −2) comes from adding the x-coordinates but forgetting to divide by 2. (−4, −2) comes from a sign error on the second x-coordinate, treating −1 as +1: (−9 + 1) ÷ 2 = −4. (5, −2) comes from dropping the negative sign on the x-coordinate.
- (b) 19.0 g/cm³ — Density = mass ÷ volume. 342.6 ÷ 18 = 19.0333…, which rounds to 19.0 g/cm³ (1 d.p.). 6166.8 g/cm³ comes from multiplying the mass by the volume instead of dividing (342.6 × 18). 324.6 g/cm³ comes from subtracting the volume from the mass (342.6 − 18) instead of dividing. 0.1 g/cm³ comes from dividing the volume by the mass instead of the mass by the volume (18 ÷ 342.6 = 0.0525…, rounded to 1 d.p.).
- (c) $12\sqrt{3}$ cm² — Use Area = 1/2 × AB × AC × sin(angle BAC) = 1/2 × 6 × 8 × sin 60°. Since sin 60° = √3⁄2, this is 1/2 × 6 × 8 × √3⁄2 = 24 × √3⁄2 = 12√3 cm². Using AB × AB instead of AB × AC (taking 6 × 6 rather than 6 × 8) gives 1/2 × 6 × 6 × sin 60° = 18 × √3⁄2 = 9√3 cm². Using AC × AC instead of AB × AC (taking 8 × 8 rather than 6 × 8) gives 1/2 × 8 × 8 × sin 60° = 32 × √3⁄2 = 16√3 cm². Leaving out the 1/2 from the area formula gives 6 × 8 × sin 60° = 48 × √3⁄2 = 24√3 cm².
- (a) y = (1/4)x + 1/4 — Rearrange 4x + y = 12 to y = −4x + 12, so the path has gradient −4. The perpendicular gradient is 1/4. Substituting (3, 1) into y − 1 = (1/4)(x − 3): y = (1/4)x − 3/4 + 1 = (1/4)x + 1/4. Distractor routes: y = −4x + 13 uses the path's own gradient, −4, instead of the perpendicular gradient, giving a line PARALLEL to the path through (3, 1) rather than perpendicular to it. y = (1/4)x − 1/4 makes an arithmetic slip combining −3/4 and 1, landing on −1/4 instead of the correct 1/4. y = −(1/4)x + 1/4 takes the reciprocal of −4, which is −1/4, but forgets to change its sign, so it is not the true negative reciprocal.
- (d) x = (y + 3)/4 — Two operations have been applied to x: it has been multiplied by 4 and then 3 has been subtracted. Undo them in the opposite order. Adding 3 to both sides gives y + 3 = 4x. Dividing both sides by 4 then gives (y + 3)/4 = x, so x = (y + 3)/4. The bracket matters: writing y/4 + 3 divides only the y by 4 and leaves the 3 untouched. Writing (y − 3)/4 subtracts the 3 instead of adding it, and writing 4(y + 3) multiplies by 4 rather than dividing.
How the 20 questions are shared out
- Number — 3 questions (15% of the qualification)
- Algebra — 6 questions (30% of the qualification)
- Ratio, proportion and rates of change — 4 questions (20% of the qualification)
- Geometry and measures — 4 questions (20% of the qualification)
- Probability — 2 questions (7.5% of the qualification)
- Statistics — 1 question (7.5% of the qualification)
Where an area has fewer printable questions than its share, the shortfall is filled from the other areas. These are original questions, not past papers.