Printable · GCSE Foundation · ages 14-16
Algebra worksheet — GCSE Foundation
Fifteen questions across the algebra statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Algebra worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) 14 — Substitute b = 6 into 3b − 4: 3 × 6 − 4 = 18 − 4 = 14. 5 comes from treating 3b as 3 + b instead of 3 × b, giving 3 + 6 − 4. 6 comes from subtracting 4 from b before multiplying by 3, 3 × (6 − 4). 18 comes from working out 3 × 6 correctly but forgetting to subtract the 4.
- (c) Second and fourth — If x + y = 0 then y = −x, so x and y always have opposite signs, one positive and one negative. A point with a negative x and a positive y lies in the second quadrant, and a point with a positive x and a negative y lies in the fourth quadrant, so the point lies in the second or the fourth. A candidate who reads x + y = 0 as meaning x and y have the same sign picks First and third, which is where x × y is positive, not where x + y = 0. A candidate who decides that y must be the positive coordinate picks the two quadrants above the x-axis, First and second. A candidate who decides that y must be the negative coordinate picks the two quadrants below the x-axis, Third and fourth.
- (a) 1 — a² − 2b = (−3)² − 2(4) = 9 − 8 = 1. A candidate who squares −3 but keeps the negative sign gets −9 − 8 = −17. A candidate who forgets to square a and substitutes it as −3 gets −3 − 8 = −11. A candidate who adds instead of subtracting 2b gets 9 + 8 = 17.
- (d) Yes: the 8th term is 50 − 8 × 7 = −6, which is negative. — Method: find the 8th term by subtracting 8 a total of 7 times from the first term, since the 1st term itself needs 0 subtractions. Working: 8th term = 50 − 8 × 7 = 50 − 56 = −6, which is negative, so Priya is correct. Answer: Yes, the 8th term is 50 − 8 × 7 = −6, which is negative. The "50 − 8 × 6 = 2" option subtracts 8 only six times instead of seven, an off-by-one error in counting the steps. The "50 − 8 × 8 = −14" option subtracts 8 eight times instead of seven, the opposite off-by-one error. The claim that repeated subtraction "can never go negative" ignores that subtracting enough times from any starting value eventually gives a negative result.
- (c) P — Sequence P has a common ratio of 2 (4 × 2 = 8, 8 × 2 = 16, 16 × 2 = 32), so it is geometric. Sequence Q has a common difference of 4, which is arithmetic, not geometric — a candidate who confuses a constant difference with a constant ratio picks Q. Sequence R has increasing differences of 3, 5, 7, a quadratic sequence, not geometric — a candidate who assumes any fast-growing sequence must be geometric picks R. Sequence S is the square numbers from 2² onwards (2², 3², 4², 5²), which is also quadratic, not geometric — a candidate who thinks squaring always means geometric growth picks S.
- (a) 17 — Substitute a = 3 into 5a + 2: 5 × 3 + 2 = 15 + 2 = 17. 10 comes from treating 5a as 5 + a instead of 5 × a, giving 5 + 3 + 2. 25 comes from adding the 2 to a before multiplying by 5, 5 × (3 + 2). 15 comes from working out 5 × 3 correctly but forgetting to add the 2.
- (c) 2n + 2 — Method: find the common difference between consecutive terms, then find the constant that fits the first term. Working: 6 − 4 = 2, 8 − 6 = 2, 10 − 8 = 2, so the terms increase by 2 each time and the nth term has the form 2n + c. Substituting n = 1: 2(1) + c = 4, so c = 2. Answer: the nth term is 2n + 2. The value 2n comes from using only the common difference and leaving out the constant c entirely. The value 2n + 4 comes from using the first term itself as c, without subtracting the common difference to find the true constant. The value 2n − 2 comes from a sign error when working out c, giving −2 instead of +2.
- (a) y = 0 — Method: in the pair (x, y) the first coordinate measures how far left or right of the origin a point is and the second how far above or below the x-axis it is, so a point on an axis has one of those measurements equal to zero. Working: the x-axis is the horizontal line through the origin, so a point sitting on it is neither above nor below that line and its second coordinate is zero, while its first coordinate may be positive, negative or zero. Answer: y = 0. The distractors: x = 0 is the condition for lying on the y-axis, the other axis; x > 0 comes from assuming a point on the x-axis must be to the right of the origin, which is true only of part of that axis; x = y holds only at the origin, which is one point of the x-axis rather than a property shared by all of them.
- (d) −4 — The coefficient of a letter is the number multiplying it, taken with the sign written in front of that number. The term containing p is being subtracted, so the term is −4p and the number multiplying p is −4. Quoting 4 drops the sign; 7 is a constant term with no letter attached to it; 9 is the number multiplying q, which is a different letter.
- (d) The fixed call-out fee, charged before the hourly rate. — Method: compare the formula with C = (fixed charge) + (rate) × h, where the fixed charge is the part that does not depend on h. Working: in C = 40 + 25h, the term 25h depends on the number of hours, h, but 40 does not change however many hours the job takes. Answer: 40 is the fixed call-out fee. 'The hourly rate' confuses the fixed term with the coefficient of h, which is actually 25. 'The total cost for a job lasting 1 hour' comes from substituting h = 1 into the formula (40 + 25 = 65) rather than reading off the constant term. 'The number of hours worked before charging starts' wrongly treats the constant, which is in pounds, as if it were measured in hours.
- (c) 4 — Method: the distance of a point from the x-axis is measured vertically, so it is the size of the y-coordinate taken without its sign. Working: the point (−6, 4) has y-coordinate 4, so moving straight down to the x-axis covers 4 units, and a distance is written as a positive number. Answer: 4. The distractors: 6 comes from using the x-coordinate, which measures the distance from the y-axis rather than from the x-axis; −6 comes from that same mistake with the minus sign left in place, although a distance is never negative; 10 comes from adding the two distances, 6 and 4, as though the question asked how far the point is from both axes together.
- (c) 22 — p² means p × p. Substitute p = 2.5: p² = 6.25, so 4p² = 4 × 6.25 = 25, and 25 − 3 = 22. 97 comes from squaring 4p together instead of just p, (4 × 2.5)² − 3 = 10² − 3 = 97. 7 comes from using p instead of p², 4 × 2.5 − 3. 1 comes from squaring the 3 instead of the p, 4 × 2.5 − 3².
- (a) 19 — Each time x increases by 1, y increases by 3 (4, 7, 10, 13 — a constant difference of 3). So at x = 4, y = 13 + 3 = 16, and at x = 5, y = 16 + 3 = 19. A candidate who stops one step early, giving the value for x = 4 instead of x = 5, answers 16. A candidate who overcounts and adds three steps of 3 instead of two from x = 3 gets 13 + 9 = 22. A candidate who mistakes the y-intercept (4) for the common difference and adds 4 twice from x = 3 gets 13 + 8 = 21.
- (b) −1 — Method: in the form y = mx + c the gradient m is the number multiplying x, and an x term written with no number in front of it has a coefficient of 1. Working: y = −x + 3 is the same equation as y = (−1)x + 3, so comparing it with y = mx + c gives m = −1 and c = 3. Answer: −1. The distractors: 1 comes from taking the coefficient as 1 and leaving the minus sign out of the answer; 3 comes from reading the constant as the gradient, confusing m with c; −3 comes from moving the minus sign across to the constant term and then reading the gradient off that term instead of the x term.
- (c) y = 3x + 7 — Method: the gradient is the change in y divided by the change in x with both taken in the same order, and a point whose x-coordinate is 0 gives the constant straight away because it lies on the y-axis. Working: m = (7 − 1) ÷ (0 − (−2)) = 6 ÷ 2 = 3; the point (0, 7) lies on the y-axis, so c = 7 and the line is y = 3x + 7. Answer: y = 3x + 7. The distractors: y = −3x + 7 comes from taking the y-difference as 1 − 7 while taking the x-difference as 0 − (−2), so the two subtractions run in opposite orders; y = 3x + 1 comes from using the y-coordinate of (−2, 1) as the constant instead of the point that actually lies on the y-axis; y = (1/3)x + 7 comes from writing the gradient upside down as the change in x over the change in y, 2 ÷ 6.
Build your own mix at the worksheet builder.