Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Work out 3π − π, giving your answer as a multiple of π.
- 2.A student works out the exact area of a circle with radius 4 cm by squaring the radius but forgetting to multiply by π. Work out the correct exact area of the circle, in terms of π.
- 3.An allotment is divided into two plots in the ratio 2:3. The larger plot has an area of 18 m². Work out the fraction of the total area taken up by the smaller plot.
- 4.Simplify x⁵ × x³ ÷ x², giving your answer as a single power of x.
- 5.By listing systematically, work out how many two-digit multiples of 5 can be made using the digits 0, 3 and 5, if each digit can be used at most once and the number cannot start with 0.
- 6.A three-digit code is made using the digits 1, 2 and 3, and each digit may be used more than once. Work out how many different three-digit codes can be made.
- 7.Four locations each record a temperature one winter morning. Which of these temperatures is the coldest?
- 8.Write 0.00072 in standard form.
- 9.£60 is shared between Amir, Bo and Chen in the ratio 1:2:3. Work out the fraction of the £60 that Amir and Bo receive together.
- 10.A number is divided by 5, then 6 is subtracted, giving the result −1. Work out the number.
- 11.Write the fraction 47/50 as a decimal.
- 12.A piece of ribbon is 2.4 metres long. Kim cuts 40 cm from it. Work out the length of ribbon left, in millimetres.
- 13.Work out 5⁰ + 5¹ + 5²
- 14.A coach journey has a 55 minute first leg, a 20 minute break and a 40 minute second leg. The coach leaves at 13:25. Work out the arrival time, using the 24-hour clock.
- 15.At a bus station one bus leaves every 6 minutes and another leaves every 9 minutes. The two buses leave together at the start of the day. Work out how long it is until they next leave together.
Answer key
- (b) 2π — Method: treat π as a single unit and subtract the coefficients, just as with algebraic terms. Working: 3π − π = 3π − 1π = 2π. Answer: 2π. 4π comes from adding the coefficients instead of subtracting: 3π + π = 4π. 3 comes from cancelling the π, treating 3π − π as if it were the division 3π ÷ π = 3. 2 comes from finding the correct coefficient, 2, but forgetting to keep π in the final answer.
- (d) 16π cm² — Method: for a circle, area = π × radius². Working: area = π × 4² = π × 16 = 16π cm². Answer: 16π cm². The student squared the radius but left out the π, which is why 16 cm² is not the exact area. 4π cm² comes from multiplying by the radius once instead of squaring it: π × 4 = 4π. 8π cm² comes from using the circumference formula 2 × π × radius instead of the area formula: 2 × π × 4 = 8π. 64π cm² comes from using the diameter (8 cm) as the radius in the area formula: π × 8² = 64π.
- (a) 2/5 — The ratio 2:3 has 2 + 3 = 5 parts in total, and the larger plot is 3 of those parts. Since the larger plot is 18 m², each part is 18 ÷ 3 = 6 m², so the total area is 5 × 6 = 30 m² and the smaller plot is 2 × 6 = 12 m². The fraction of the total area taken up by the smaller plot is 12/30, which simplifies to 2/5. Giving the fraction for the larger plot instead of the smaller one gives 3/5. Comparing the smaller plot to the larger plot instead of to the total area gives 2/3. Assuming the two plots split the area evenly, ignoring the given ratio altogether, gives 1/2.
- (a) x⁶ — Method: work through the powers in order — multiplying powers of the same base means adding indices, and dividing powers of the same base means subtracting indices. Working: first, x⁵ × x³ = x⁸ (adding 5 and 3); then x⁸ ÷ x² = x⁶ (subtracting 2 from 8). x⁴ comes from swapping the two rules — subtracting for the multiplication, 5 − 3 = 2, and then adding for the division, 2 + 2 = 4. x¹⁰ comes from adding all three indices, 5 + 3 + 2 = 10, treating the division the same as a multiplication. 6x comes from correctly reaching a total index of 6 but then writing it as a coefficient of x instead of as its power. Answer: x⁶.
- (b) 3 — Method: list all valid two-digit numbers that can be made without starting with 0, then keep only the ones that are multiples of 5. Working: the two-digit numbers possible are 30, 35, 50 and 53. A number is a multiple of 5 only if it ends in 0 or 5: 30 ends in 0, 35 ends in 5, 50 ends in 0, but 53 ends in 3. So there are 3 multiples of 5. Answer: 3. 4 comes from including 53 as a multiple of 5 without checking that its last digit is not 0 or 5. 2 comes from leaving out 50, wrongly assuming 0 cannot be used as the second digit either. 6 comes from listing every two-digit arrangement of the three digits, including ones that start with 0, without applying either restriction.
- (c) 27 — Each of the 3 digits can be chosen independently for each of the 3 positions, so multiply: 3 × 3 × 3 = 27. 9 comes from multiplying only two of the three positions, 3 × 3, and forgetting the third. 6 comes from working out 3 × 2 × 1 = 6, which counts codes where digits do not repeat, but the question allows repeated digits. 3 comes from considering only one digit position.
- (a) −4.5 °C — Order the temperatures by their actual value on a number line, remembering that a more negative number is further below zero and therefore colder: −4.5 °C is the coldest, since it is further below zero than −4.05 °C, −3.8 °C or 2 °C. Comparing the digits 405 and 45 as though the decimal points lined up, without padding −4.5 to match the number of decimal places in −4.05 first, makes −4.05 °C look like it has the bigger size, so it gets picked as the coldest by mistake — in fact −4.05 °C is closer to zero than −4.5 °C, not further from it. Picking −3.8 °C comes from choosing the negative reading with the smallest absolute value, forgetting that for negative numbers, a smaller absolute value means a warmer, less negative temperature, not a colder one. Picking 2 °C comes from ignoring the negative signs on the other three readings altogether and comparing raw digit sizes, when in fact any negative temperature is colder than any positive temperature. So the coldest temperature is −4.5 °C.
- (a) 7.2 × 10⁻⁴ — 0.00072 = 7.2 × 10⁻⁴, moving the decimal point 4 places to the right to reach 7.2, so the exponent is negative. Writing 7.2 × 10⁴ uses a positive exponent, which would give a number far larger than 1, not a small decimal. Writing 7.2 × 10⁻⁵ moves the point one place too many. Writing 0.72 × 10⁻³ leaves the coefficient below 1, which standard form does not allow.
- (a) 1/2 — The ratio 1:2:3 has 1 + 2 + 3 = 6 parts in total. Amir and Bo together receive 1 + 2 = 3 of those parts, so together they receive 3/6 of the £60, which simplifies to 1/2. Using only Amir's single part, 1/6, ignores Bo's share entirely. Adding Bo's and Chen's parts instead of Amir's and Bo's, 2 + 3 = 5, gives 5/6. Comparing Amir and Bo's 3 parts to Chen's 3 parts, rather than to the total of 6 parts, gives 3/3 = 1.
- (a) 25 — Reverse the operations in reverse order: undo the subtraction by adding 6, then undo the division by multiplying by 5. −1 + 6 = 5, so the number divided by 5 equals 5, and 5 × 5 = 25 — checking, 25 ÷ 5 − 6 = 5 − 6 = −1. A candidate who subtracted 6 again instead of adding worked out −1 − 6 = −7, then −7 × 5 = −35. A candidate who multiplied by 5 before undoing the subtraction, doing the inverse operations in the wrong order, worked out −1 × 5 = −5, then −5 + 6 = 1. A candidate who multiplied by 5 but forgot to undo the subtraction at all worked out −1 × 5 = −5 and stopped there.
- (c) 0.94 — Method: a fraction is written as a decimal by making the denominator a power of ten, because the decimal places record tenths, hundredths and thousandths. Working: 50 × 2 = 100, so the numerator must also be multiplied by 2, giving 47 × 2 = 94 and the equivalent fraction 94/100; 94 hundredths is written with two digits after the decimal point. Answer: 0.94. The distractors: 0.47 comes from treating the denominator as though it were already 100 and writing the digits of the numerator straight after the point; 4.7 comes from dividing 47 by 10 instead of by 50; 0.094 comes from multiplying the denominator by 20 to reach 1000 but the numerator by only 2, giving 94/1000.
- (c) 2000 mm — Put both lengths into the same unit first. There are 1000 mm in a metre, so the ribbon is 2.4 × 1000 = 2400 mm, and there are 10 mm in a centimetre, so the piece cut off is 40 × 10 = 400 mm. The length left is 2400 − 400 = 2000 mm. 2360 mm subtracts 40 mm instead of 400 mm, 200 mm works in centimetres and then labels the result as millimetres, and 2800 mm adds the piece that was cut off instead of subtracting it.
- (c) 31 — Method: work out each power separately, remembering that any non-zero base raised to the power 0 is 1 and a base raised to the power 1 is itself, then add the three values. Working: 5⁰ = 1, 5¹ = 5 and 5² = 25, so the total is 1 + 5 + 25 = 31. Answer: 31. The distractors: 30 comes from taking 5⁰ as 0 instead of 1; 35 comes from taking 5⁰ as 5, treating a zero index as leaving the base unchanged; 125 comes from adding the indices first, as though the three terms were being multiplied, and working out 5³.
- (d) 15:20 — Method: add all three journey segments to the departure time, converting the total number of minutes into hours and minutes. Working: 55 + 20 + 40 = 115 minutes = 1 hour 55 minutes. 13:25 + 1 hour 55 minutes = 15:20. Answer: 15:20. (15:00 comes from leaving out the 20 minute break and adding only 55 + 40 = 95 minutes. 14:25 comes from leaving out the 55 minute first leg and adding only 20 + 40 = 60 minutes. 14:40 comes from leaving out the 40 minute second leg and adding only 55 + 20 = 75 minutes.)
- (a) 18 minutes — Method: the buses leave together again after a number of minutes that is a multiple of both intervals, and the first such time is the lowest common multiple. Working: the multiples of 6 are 6, 12, 18, 24 … and the multiples of 9 are 9, 18, 27 … The first value in both lists is 18, which is 6 × 3 and 9 × 2. Answer: 18 minutes. The distractors: 54 minutes comes from multiplying 6 by 9, which does give a common multiple but not the lowest one; 3 minutes is the highest common factor of 6 and 9 rather than their lowest common multiple; 15 minutes comes from adding the two intervals together.
Build your own mix at the worksheet builder.