Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A garden path is measured by Jon as 12 m, correct to the nearest metre, and by Mia as 12.6 m, correct to the nearest 0.1 m. Which statement about the two measurements is correct?
- 2.Grace works out 7 × 99 by writing 99 as 100 − 1. Use her method to work out 7 × 99.
- 3.By listing systematically, work out how many two-digit multiples of 5 can be made using the digits 0, 3 and 5, if each digit can be used at most once and the number cannot start with 0.
- 4.The attendance at a football match is 23,000, correct to the nearest thousand. Which of these attendances is not possible for the match?
- 5.Work out the highest common factor of 15 and 25.
- 6.Write 0.25 as a fraction in its simplest form.
- 7.A van has a mass of 2,000 kg, correct to 1 significant figure. Using m for the mass of the van in kilograms, write down the error interval for m.
- 8.Write these numbers in order, starting with the smallest: −1.4, 5/4, −6/5, 1.3, 0
- 9.In a classroom the ratio of boys to girls is 3 : 4. What fraction of the class are boys?
- 10.Write these fractions in order, starting with the smallest: 2/3, 3/5, 5/6, 1/2
- 11.Write 0.36 as a fraction in its simplest form.
- 12.Write 260,000 in standard form.
- 13.A plumber charges a call-out fee of £45 and then £28 for each hour she works. She is at a house from 09:15 until 12:45. Work out the total charge.
- 14.Write down a prime number between 30 and 40.
- 15.The diameter of an artificial silk fibre is 4 × 10⁻⁶ metres. One nanometre is 10⁻⁹ metres. Work out the diameter of the fibre in nanometres.
Answer key
- (a) They cannot both be describing the same path — Jon's measurement means the true length, l, satisfies 11.5 m ≤ l < 12.5 m. Mia's measurement means the true length satisfies 12.55 m ≤ l < 12.65 m. These two ranges do not overlap, so the two measurements cannot both be describing the same path. 'They must both be describing the same path' ignores that the two ranges do not overlap at all. 'Jon's measurement must be wrong' wrongly assumes Jon is the one at fault, when the mismatch does not show which measurement, if either, is wrong. 'Mia's measurement must be wrong' makes the same unjustified assumption in the other direction.
- (c) 693 — Method: multiplying a bracket by a number multiplies every term inside it, so 7 × (100 − 1) = 7 × 100 − 7 × 1. Working: 7 × 100 = 700 and 7 × 1 = 7, so the calculation becomes 700 − 7 = 693. Answer: 693. The distractors: 699 comes from subtracting the 1 itself rather than 7 lots of it, giving 700 − 1 = 699; 707 comes from adding the second product instead of subtracting it, giving 700 + 7 = 707; 700 comes from rounding 99 up to 100 and then offering the estimate 7 × 100 as an exact value.
- (b) 3 — Method: list all valid two-digit numbers that can be made without starting with 0, then keep only the ones that are multiples of 5. Working: the two-digit numbers possible are 30, 35, 50 and 53. A number is a multiple of 5 only if it ends in 0 or 5: 30 ends in 0, 35 ends in 5, 50 ends in 0, but 53 ends in 3. So there are 3 multiples of 5. Answer: 3. 4 comes from including 53 as a multiple of 5 without checking that its last digit is not 0 or 5. 2 comes from leaving out 50, wrongly assuming 0 cannot be used as the second digit either. 6 comes from listing every two-digit arrangement of the three digits, including ones that start with 0, without applying either restriction.
- (d) 23,600 — 23,000 correct to the nearest thousand means the true attendance, a, satisfies 22,500 ≤ a < 23,500. 23,600 is outside this range, so it is not possible. 22,500 is the lower bound of the range, so it is possible. 23,499 is just below the upper bound, so it is possible. 23,000 is the given value itself, so it is possible.
- (b) 5 — Method: list the factors of each number and pick the largest value that appears in both lists. Working: the factors of 15 are 1, 3, 5 and 15; the factors of 25 are 1, 5 and 25. The values in both lists are 1 and 5, and the larger of those is 5. Answer: 5. The distractors: 3 comes from choosing a factor of 15 without checking that it also divides 25; 15 comes from assuming that the smaller of the two numbers is always a factor of the larger one; 75 is the lowest common multiple of 15 and 25, given by taking the highest power of each prime instead of the lowest.
- (d) 1/4 — Method: count the digits after the decimal point to choose a denominator that is a power of ten, then cancel the fraction by the highest common factor of the numerator and the denominator. Working: 0.25 has two digits after the point, so 0.25 is 25 hundredths and can be written as 25/100; the highest common factor of 25 and 100 is 25, and 25 ÷ 25 = 1 with 100 ÷ 25 = 4. Answer: 1/4. The distractors: 2/5 comes from reading the two digits after the point as a numerator and a denominator and writing 2 over 5; 1/25 comes from putting 1 over the digits after the point, as though 0.25 meant one twenty-fifth; 1/40 comes from miscounting the decimal places and using a denominator of 1000, giving 25/1000, which cancels by 25 to 1/40.
- (a) 1,500 ≤ m < 2,500 — Method: a four-digit figure written to 1 significant figure has been rounded to the nearest 1,000, so the mass lies within half of 1,000, that is 500, of the figure given. Working: 2,000 − 500 = 1,500 and 2,000 + 500 = 2,500. The lower limit is included, because 1,500 kg rounds up to 2,000 kg to 1 significant figure, while 2,500 kg rounds up to 3,000 kg, so the upper limit is not. Answer: 1,500 ≤ m < 2,500. The distractors: 1,950 ≤ m < 2,050 comes from rounding to the nearest 100 instead of to 1 significant figure; 1,000 ≤ m < 3,000 goes a whole 1,000 either side instead of half of it; 1,500 < m ≤ 2,500 has the two limits the wrong way round.
- (d) −1.4, −6/5, 0, 5/4, 1.3 — Method: convert the fractions 5/4 and −6/5 to decimals so every number is written the same way, then compare all five decimals. Working: 5/4 = 1.25 and −6/5 = −1.2. Comparing −1.4, −1.2, 0, 1.25 and 1.3 in size gives the order −1.4, −1.2, 0, 1.25, 1.3. Answer: −1.4, −6/5, 0, 5/4, 1.3. −6/5, −1.4, 0, 5/4, 1.3 swaps the two negative numbers, treating −6/5 as more negative than −1.4 even though −1.2 is closer to zero than −1.4. 1.3, 5/4, 0, −6/5, −1.4 lists the numbers from largest to smallest instead of smallest to largest. −1.4, −6/5, 0, 1.3, 5/4 swaps 5/4 and 1.3, comparing the numerator 5 directly with 1.3 instead of converting 5/4 to the decimal 1.25 first.
- (b) 3/7 — Total parts = 3 + 4 = 7. Boys are 3 of the 7 parts, so the fraction is 3/7. 4/7 comes from finding the fraction of girls instead of boys. 3/4 comes from writing the ratio itself as a fraction, without adding the parts to find the total. 7/3 comes from putting the total number of parts over the number of boys instead of the number of boys over the total.
- (a) 1/2, 3/5, 2/3, 5/6 — Convert all four fractions to a common denominator of 30: 2/3 is 20/30, 3/5 is 18/30, 5/6 is 25/30, and 1/2 is 15/30. Ordering by these numerators, smallest to largest, gives 15/30, 18/30, 20/30, 25/30, which is 1/2, 3/5, 2/3, 5/6. Ordering by the size of the numerator in the original fractions, 1, 2, 3, 5, rather than converting to a common denominator, gives the wrong order 1/2, 2/3, 3/5, 5/6, because it ignores that the denominators are different. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 5/6, 2/3, 3/5, 1/2. Using the rule "the bigger the denominator, the smaller the fraction" to place the last two, so that 5/6 is put below 2/3 because 6 is bigger than 3, gives 1/2, 3/5, 5/6, 2/3 — that rule only holds when the numerators are the same, and here 20/30 really is smaller than 25/30. So the correct order, smallest to largest, is 1/2, 3/5, 2/3, 5/6.
- (b) 9/25 — Method: write the decimal over the matching power of ten, then divide the numerator and the denominator by their highest common factor. Working: 0.36 has two digits after the point, so 0.36 = 36/100; the highest common factor of 36 and 100 is 4, and 36 ÷ 4 = 9 with 100 ÷ 4 = 25; since 9 and 25 share no factor greater than 1, the fraction is fully cancelled. Answer: 9/25. The distractors: 3/10 comes from reading only the first digit after the point and converting 0.3; 9/50 comes from dividing the numerator by 4 but the denominator by only 2; 36/10 comes from counting one decimal place instead of two and writing the digits over 10.
- (c) 2.6 × 10⁵ — In standard form, A must satisfy 1 ≤ A < 10. Moving the decimal point in 260,000 to just after the 2 gives A = 2.6, and the decimal point moved 5 places, so 260,000 = 2.6 × 10⁵. A candidate who wrote 26 × 10⁴ used a value of A outside the required range, even though it has the same overall value. A candidate who wrote 2.6 × 10⁶ counted one place too many when moving the decimal point. A candidate who wrote 0.26 × 10⁶ used a value of A below 1, again outside the required range.
- (d) £143 — From 09:15 to 12:45 is 3 hours 30 minutes, which is 3.5 hours. The charge for the time is 3.5 × £28 = £98, and the call-out fee is added on once: £98 + £45 = £143. £98 leaves out the call-out fee altogether, £129 charges for 3 hours instead of 3.5 hours, and £255.50 adds the fee to the hourly rate before multiplying, which charges the £45 for every hour.
- (b) 31 — Method: a prime number has exactly two factors, 1 and itself, so check each number between 30 and 40 for other factors. Working: 3 × 11 = 33, so 33 is not prime. 2 × 17 = 34, so 34 is not prime. 4 × 9 = 36, so 36 is not prime. 31 has no factors other than 1 and 31, so it is prime. Answer: 31.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
Build your own mix at the worksheet builder.