Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A fabric is dyed blue and yellow in the ratio 3 : 5. A tailor uses 1.5 m of blue fabric and the matching amount of yellow fabric needed for the ratio. Work out the total length of fabric used.
- 2.The thickness of a sheet of card is 0.02384 cm. Write this thickness correct to 2 significant figures.
- 3.Write 0.875 as a fraction in its simplest form.
- 4.Simplify 2³ × 2⁴, giving your answer as a single power of 2.
- 5.4ˣ = 64. Work out the value of x.
- 6.Which of these numbers rounds to 0.048 when rounded to 2 significant figures?
- 7.Simplify x⁷ × x⁴, giving your answer as a single power of x.
- 8.Write 0.36 as a fraction in its simplest form.
- 9.Work out 3.7 × 24.
- 10.Write down the reciprocal of 5/8
- 11.A concrete mix is made from cement and sand in the ratio 3 : 5 by mass. A builder mixes 96 kg of concrete. Work out the mass of cement in the mix.
- 12.Write these numbers in order, starting with the largest: −0.6, 0.45, −0.15, 0.5, −0.09
- 13.Work out (4 × 10⁻³) × (2 × 10⁵). Give your answer in standard form.
- 14.Write these numbers in order, starting with the largest: 7/8, 0.8, 78%, 17/20
- 15.Work out 2/5 + 1/4, giving your answer in its simplest form.
Answer key
- (b) 4 m — Blue fabric is 3 parts and this equals 1.5 m, so one part is 1.5 ÷ 3 = 0.5 m. Yellow fabric is 5 parts, so it is 5 × 0.5 = 2.5 m. The total length is 1.5 + 2.5 = 4 m. 2.5 m is the length of yellow fabric only, without adding the blue fabric back in. 1.5 m is just the given length of blue fabric, with the yellow fabric never worked out. 2.4 m comes from swapping the ratio, treating blue as 5 parts and yellow as 3 parts, giving one part as 1.5 ÷ 5 = 0.3 m and yellow as 3 × 0.3 = 0.9 m, then adding 1.5 + 0.9 = 2.4.
- (d) 0.024 cm — Method: significant figures are counted from the first non-zero digit; the zeros in front of it only fix the place value and are not significant. Working: in 0.02384 the first significant figure is 2 and the second is 3, so the rounding is decided by the next digit, 8. As 8 is 5 or more, the second significant figure goes up from 3 to 4, in the same place value. Answer: 0.024 cm. The distractors: 0.023 cm comes from chopping the 84 off instead of rounding it; 0.02 cm comes from counting the leading zeros as significant figures, so the 2 is taken as the second figure and the rounding stops there; 0.0238 cm is 0.02384 correct to 3 significant figures, one figure too many.
- (a) 7/8 — Method: write the decimal over the power of ten that matches the number of digits after the point, then divide the numerator and the denominator by their highest common factor. Working: 0.875 has three digits after the point, so it is 875 thousandths and can be written as 875/1000; the highest common factor of 875 and 1000 is 125, and 875 ÷ 125 = 7 with 1000 ÷ 125 = 8. Answer: 7/8. The distractors: 8/7 comes from cancelling correctly but writing the two parts the wrong way round; 9/10 comes from rounding 0.875 to one decimal place as 0.9 before converting; 7/80 comes from counting four decimal places instead of three and using a denominator of 10000, giving 875/10000.
- (d) 2⁷ — When multiplying powers of the same base, the indices add: 3 + 4 = 7, so 2³ × 2⁴ = 2⁷. Multiplying the indices instead of adding them gives 3 × 4 = 12, so 2¹². Subtracting the indices instead of adding them gives 4 − 3 = 1, so 2¹. Multiplying the bases together as well as adding the indices gives 2 × 2 = 4, so 4⁷.
- (b) 3 — Method: solving an index equation like this means finding how many factors of the base multiply together to give the number on the right. Working: 4¹ = 4, 4² = 16 and 4³ = 64, so three factors of 4 are needed. Answer: 3. The distractors: 4 comes from listing 4, 16 and 64 and counting the base itself as a step, which gives one more than the index; 6 comes from solving the equation with 2 as the base instead of 4, since 2⁶ = 64; 16 comes from dividing 64 by 4, treating the index as an instruction to divide.
- (c) 0.0479 — Method: round each option to 2 significant figures and check which one gives 0.048. Working: for 0.0479, the first two significant figures are 4 and 7; the next digit is 9, so 7 rounds up to 8, giving 0.048. For 0.0485, the first two significant figures are 4 and 8; the next digit is 5, so 8 rounds up to 9, giving 0.049, not 0.048. 0.052 already has exactly 2 significant figures, 5 and 2, so it stays as 0.052 and does not round to 0.048 at all. 0.04 has only 1 significant figure, so it is already less precise than the 2 significant figures asked for. Answer: 0.0479.
- (a) x¹¹ — Method: when multiplying powers of the same base, add the indices. Working: 7 + 4 = 11, so x⁷ × x⁴ = x¹¹. x²⁸ comes from multiplying the indices, 7 × 4 = 28, instead of adding them. x³ comes from working out 7 − 4 = 3, which is the rule for dividing powers, not multiplying them. 11x comes from adding the indices to make 11 but then treating x as a coefficient instead of a power. Answer: x¹¹.
- (b) 9/25 — Method: write the decimal over the matching power of ten, then divide the numerator and the denominator by their highest common factor. Working: 0.36 has two digits after the point, so 0.36 = 36/100; the highest common factor of 36 and 100 is 4, and 36 ÷ 4 = 9 with 100 ÷ 4 = 25; since 9 and 25 share no factor greater than 1, the fraction is fully cancelled. Answer: 9/25. The distractors: 3/10 comes from reading only the first digit after the point and converting 0.3; 9/50 comes from dividing the numerator by 4 but the denominator by only 2; 36/10 comes from counting one decimal place instead of two and writing the digits over 10.
- (b) 88.8 — Multiply as whole numbers first, ignoring the decimal point: 37 × 24. Split it as 37 × 20 = 740 and 37 × 4 = 148, so 37 × 24 = 740 + 148 = 888. 3.7 has 1 decimal place and 24 has none, so the answer needs 1 decimal place: 88.8. Counting the 2 digits in "3.7" as though that were the number of decimal places gives 8.88 instead of 1 decimal place. Leaving the decimal point out altogether gives 888. Misreading 37 × 4 as 138 rather than 148 gives a running total of 878, placed with 1 decimal place as 87.8. So 3.7 × 24 = 88.8.
- (b) 8/5 — The reciprocal of a fraction a/b is b/a — swap the numerator and denominator. So the reciprocal of 5/8 is 8/5. A candidate who wrote 5/8 gave the original fraction, not its reciprocal. A candidate who worked out 1 − 5/8 = 3/8 confused 'reciprocal' with subtracting from 1. A candidate who wrote −8/5 inverted the fraction correctly but introduced an unnecessary sign change.
- (a) 36 kg — The mix is 3 + 5 = 8 equal shares, so the cement is 3/8 of the mass. One share is 96 ÷ 8 = 12 kg, and the cement is 3 shares: 3 × 12 = 36 kg. Working out 3/5 of 96 gives 57.6 kg, which uses the sand as the denominator instead of the whole mix; 60 kg is the mass of the sand; 12 kg is one share only.
- (c) 0.5, 0.45, −0.09, −0.15, −0.6 — Method: compare the decimals by their position on a number line, remembering that with negative decimals the one closer to zero is larger. Working: 0.5 and 0.45 are positive, so they come first, with 0.5 the larger of the two. Among the negatives, −0.09 is closest to zero, then −0.15, then −0.6 is furthest from zero and so the smallest. Answer: 0.5, 0.45, −0.09, −0.15, −0.6. 0.5, 0.45, −0.15, −0.09, −0.6 swaps −0.09 and −0.15, treating the negative decimal with more digits after the point as closer to zero. −0.6, −0.15, −0.09, 0.45, 0.5 lists the numbers from smallest to largest instead of largest to smallest. 0.5, 0.45, −0.6, −0.15, −0.09 orders the negative decimals by the size of the digit (0.6 > 0.15 > 0.09) as if they were positive, instead of recognising that a bigger negative decimal is further from zero and so smaller.
- (a) 8 × 10² — Method: to multiply numbers written in standard form, multiply the coefficients and add the indices. Working: 4 × 2 = 8 for the coefficients, and −3 + 5 = 2 for the indices; 8 already lies between 1 and 10, so no adjustment is needed. Answer: 8 × 10². The distractors: 6 × 10² comes from adding the coefficients, 4 + 2, instead of multiplying them; 8 × 10⁸ comes from ignoring the minus sign and adding 3 + 5; 8 × 10⁻¹⁵ comes from multiplying the indices, −3 × 5, instead of adding them.
- (a) 7/8, 17/20, 0.8, 78% — Method: convert every value to a decimal, then order the decimals from largest to smallest. Working: 7/8 = 0.875, 17/20 = 0.85, 0.8 = 0.8, 78% = 0.78. Ordering from largest to smallest gives 7/8, 17/20, 0.8, 78%. Answer: 7/8, 17/20, 0.8, 78%. '78%, 0.8, 17/20, 7/8' comes from ordering the converted decimals from smallest to largest instead of largest to smallest. '17/20, 7/8, 0.8, 78%' comes from converting 17/20 incorrectly as larger than 7/8, for example treating 17/20 as 0.87 instead of 0.85, swapping the top two. '7/8, 0.8, 17/20, 78%' comes from converting 17/20 incorrectly as equal to 0.8, swapping the middle two.
- (d) 13/20 — Method: write both fractions over a common denominator, then add the numerators. Working: 2/5 = 8/20 and 1/4 = 5/20, so 2/5 + 1/4 = 8/20 + 5/20 = 13/20, which is already in its simplest form. Answer: 13/20. 1/3 comes from adding the numerators and the denominators separately: (2+1)/(5+4) = 3/9 = 1/3. 13/40 comes from converting both fractions to twentieths correctly but then adding the denominators as well as the numerators: (8+5)/(20+20) = 13/40. 3/20 comes from adding the original numerators (2+1) but keeping them over the common denominator without converting them first: 3/20.
Build your own mix at the worksheet builder.