Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A digital timer truncates every time to 1 decimal place. It shows a swimmer's time for one length as 12.3 seconds. Using t for the swimmer's actual time in seconds, write down the error interval for t.
- 2.A water tank holds 80 litres when full. It currently contains 60 litres. Work out what fraction of the tank is empty.
- 3.A train journey takes 45 minutes, correct to the nearest 5 minutes. Using t for the actual time of the journey in minutes, write down the error interval for t.
- 4.A cheetah runs at a steady speed of 25 metres per second. Work out this speed in kilometres per hour.
- 5.The attendance at a football match is 23,000, correct to the nearest thousand. Which of these attendances is not possible for the match?
- 6.Write 0.25 as a fraction in its simplest form.
- 7.A bag of flour is labelled 1.5 kg, correct to the nearest 0.1 kg. The true mass of the flour is m kg. Which inequality gives all the possible values of m?
- 8.Write '3.2 million' as a number in figures.
- 9.Work out 3 × (−2)² − 5
- 10.Work out 0.6 × 0.04.
- 11.Work out (−6) + (−4) × 3
- 12.A square petri dish has an area of 121 mm². A scientist wants to know its side length. Work out the side length of the dish.
- 13.Four students work out 6 + 2 × 3. Which student has worked it out correctly?
- 14.Light travels at 2.998 × 10⁸ metres per second. A distant object in space is 3.1 × 10¹⁵ metres from Earth. Work out an estimate for the number of seconds light takes to travel from the object to Earth, by rounding each number to 1 significant figure.
- 15.The length of a nail is 12 cm, correct to the nearest centimetre. Using L for the length of the nail in centimetres, write down the error interval for L.
Answer key
- (c) 12.3 ≤ t < 12.4 — Method: truncating cuts the later digits off instead of rounding them, so nothing is ever pushed upwards. The displayed value is therefore the smallest the time can be, and the time can run up to, but not reach, the next value the display can show. Working: the display reads 12.3, so the actual time is at least 12.3 seconds; as soon as the time reaches 12.3 + 0.1 = 12.4 seconds the display would read 12.4, so 12.4 is not included. Answer: 12.3 ≤ t < 12.4. The distractors: 12.25 ≤ t < 12.35 is the interval for a time rounded to 1 decimal place, and this display does not round; 12.3 < t ≤ 12.4 excludes the one value the display certainly allows and includes the one it rules out; 12.3 ≤ t ≤ 12.4 treats 12.4 seconds as possible, but at 12.4 seconds the display would no longer read 12.3.
- (a) 1/4 — The empty part of the tank is 80 − 60 = 20 litres. As a fraction of the full capacity, this is 20/80, which simplifies to 1/4. Finding the fraction of the tank that is FULL instead of empty, 60/80, simplifies to 3/4 — the wrong quantity for the question asked. Writing the empty amount over the amount remaining instead of over the full capacity, 20/60, simplifies to 1/3. Comparing the empty amount to 100 instead of to the tank's actual capacity of 80, 20/100, gives 1/5.
- (a) 42.5 ≤ t < 47.5 — Rounding to the nearest 5 minutes means the actual time can be up to half of 5 minutes, 2.5 minutes, below or above 45 before it would round to a different multiple of 5. The lower bound is 45 − 2.5 = 42.5 and the upper bound is 45 + 2.5 = 47.5. A time of exactly 47.5 minutes would round up to 50, not 45, so 47.5 is excluded while 42.5 does still round to 45. Writing 42.5 ≤ t ≤ 47.5 wrongly includes 47.5. Writing 40 ≤ t < 50 uses a whole rounding unit, 5, either side instead of half of it. Writing 44.5 ≤ t < 45.5 treats the rounding unit as 1 minute instead of 5 minutes.
- (b) 90 km/h — To convert metres per second to kilometres per hour, multiply by 3.6 (there are 3600 seconds in an hour and 1000 metres in a kilometre, and 3600 ÷ 1000 = 3.6): 25 × 3.6 = 90 km/h. Dividing by 3.6 instead of multiplying gives 25 ÷ 3.6 = 6.9 km/h (to 1 d.p.). Multiplying by 60 instead of 3.6, confusing the conversion from seconds to minutes with the conversion to hours, gives 25 × 60 = 1500 km/h. Multiplying by 3600 to convert seconds to hours but forgetting to convert metres to kilometres gives 25 × 3600 = 90000, which is a speed in metres per hour, not kilometres per hour.
- (d) 23,600 — 23,000 correct to the nearest thousand means the true attendance, a, satisfies 22,500 ≤ a < 23,500. 23,600 is outside this range, so it is not possible. 22,500 is the lower bound of the range, so it is possible. 23,499 is just below the upper bound, so it is possible. 23,000 is the given value itself, so it is possible.
- (d) 1/4 — Method: count the digits after the decimal point to choose a denominator that is a power of ten, then cancel the fraction by the highest common factor of the numerator and the denominator. Working: 0.25 has two digits after the point, so 0.25 is 25 hundredths and can be written as 25/100; the highest common factor of 25 and 100 is 25, and 25 ÷ 25 = 1 with 100 ÷ 25 = 4. Answer: 1/4. The distractors: 2/5 comes from reading the two digits after the point as a numerator and a denominator and writing 2 over 5; 1/25 comes from putting 1 over the digits after the point, as though 0.25 meant one twenty-fifth; 1/40 comes from miscounting the decimal places and using a denominator of 1000, giving 25/1000, which cancels by 25 to 1/40.
- (b) 1.45 ≤ m < 1.55 — The flour's mass is labelled 1.5 kg, correct to the nearest 0.1 kg, so half of 0.1 kg is added to and subtracted from 1.5 kg to find the interval: 1.5 − 0.05 = 1.45 and 1.5 + 0.05 = 1.55, giving 1.45 ≤ m < 1.55. '1.4 ≤ m < 1.6' comes from taking the whole 0.1 kg as the margin either side, instead of half of it. '1.45 < m ≤ 1.55' comes from writing the inequality signs the wrong way round — the lower bound should be included and the upper bound excluded, not the other way round. '1.45 ≤ m ≤ 1.55' comes from including the upper bound, when the convention is that the upper bound is never actually reached.
- (d) 3,200,000 — 1 million = 1,000,000, so 3.2 million = 3.2 × 1,000,000 = 3,200,000. A candidate who moves the decimal point one place too many gets 32,000,000. A candidate who moves it one place too few gets 320,000. A candidate who writes the .2 as extra thousands instead of hundred-thousands gets 3,002,000.
- (a) 7 — Method: BIDMAS deals with the index first, then the multiplication, then the subtraction. Working: (−2)² = (−2) × (−2) = 4, then 3 × 4 = 12, and finally 12 − 5 = 7. Answer: 7. The distractors: −17 comes from squaring only the 2 and keeping the minus sign, giving 3 × (−4) = −12 and then −12 − 5 = −17; 31 comes from multiplying before applying the index, giving (3 × (−2))² = (−6)² = 36 and then 36 − 5 = 31; −3 comes from carrying out the subtraction before the multiplication, giving 3 × (4 − 5) = 3 × (−1) = −3.
- (c) 0.024 — Multiply the digits ignoring the decimal points: 6 × 4 = 24. Count the total number of decimal places in the two numbers being multiplied: 0.6 has 1 decimal place and 0.04 has 2, giving 3 in total. Place the decimal point in 24 so that there are 3 digits after it: 0.024. Counting only 2 decimal places instead of 3 gives 0.24. Counting 4 decimal places instead of 3 gives 0.0024. Counting only 1 decimal place instead of 3 — in effect moving the point in just one of the two numbers, as if the calculation were 6 × 0.4 — gives 2.4. So 0.6 × 0.04 = 0.024.
- (b) −18 — Method: the multiplication is carried out before the addition, and a negative multiplied by a positive is negative. Working: (−4) × 3 = −12, so the calculation becomes (−6) + (−12) = −18. Answer: −18. The distractors: −30 comes from adding first and multiplying afterwards, giving (−6 + −4) × 3 = −10 × 3 = −30; 6 comes from treating (−4) × 3 as +12 on the grounds that a minus sign makes a product positive, giving −6 + 12 = 6; 18 comes from ignoring both minus signs and working out 6 + 4 × 3 = 18.
- (d) 11 mm — Method: for a square, the side length is the square root of the area. Working: 11 × 11 = 121, so the side length is 11 mm. 60.5 mm comes from working out 121 ÷ 2 = 60.5, halving the area instead of finding its square root. 242 mm comes from working out 121 × 2 = 242, doubling the area instead of finding its square root. 22 mm comes from working out 11 × 2 = 22, doubling the correct side length. Answer: 11 mm.
- (c) Ben: 2 × 3 = 6, then 6 + 6 = 12 — Multiplication has priority over addition, so 2 × 3 = 6 is worked out first, then 6 + 6 = 12 — this is Ben's method. Amy adds 6 and 2 before multiplying: 6 + 2 = 8, then 8 × 3 = 24, breaking the priority rule. Chen multiplies the wrong pair of numbers, 6 and 2, instead of 2 and 3: 6 × 2 = 12, then 12 + 3 = 15. Dev applies the right order but slips when multiplying, using 5 instead of 6 for 2 × 3, so the final step becomes 6 + 5 = 11.
- (d) 1 × 10⁷ seconds — Method: the time for a journey is the distance divided by the speed, so round each number to 1 significant figure and then divide; dividing numbers in standard form means dividing the coefficients and subtracting the indices. Working: 3.1 × 10¹⁵ rounds to 3 × 10¹⁵ and 2.998 × 10⁸ rounds to 3 × 10⁸; 3 ÷ 3 = 1 for the coefficients, and 15 − 8 = 7 for the indices. Answer: about 1 × 10⁷ seconds. The distractors: 3 × 10⁷ seconds comes from subtracting the indices correctly but leaving the coefficient as 3 instead of dividing 3 by 3; 1 × 10⁻⁷ seconds comes from dividing the speed by the distance instead of the distance by the speed; 9 × 10²³ seconds comes from multiplying the two quantities instead of dividing them, since 3 × 3 = 9 and 15 + 8 = 23.
- (a) 11.5 ≤ L < 12.5 — Rounding to the nearest centimetre means L can be up to half a centimetre below or above 12 before it would round to a different whole number. Half of 1 cm is 0.5 cm, so the lower bound is 12 − 0.5 = 11.5 and the upper bound is 12 + 0.5 = 12.5. A value exactly at the upper bound, 12.5, would round up to 13, not 12, so 12.5 itself is excluded, giving 11.5 ≤ L < 12.5. Writing 11.5 ≤ L ≤ 12.5 wrongly includes 12.5 on both ends. Writing 11 ≤ L < 13 uses a whole centimetre either side instead of half a centimetre. Writing 11.5 < L < 12.5 wrongly excludes the lower bound, which is a value that does round to 12.
Build your own mix at the worksheet builder.