Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.A rectangular field measures 19.6 m by 48.3 m. Work out an estimate for the area of the field, by rounding each length to 1 significant figure.
- 2.Round 3.947 to 2 decimal places.
- 3.Write down the symbol that makes this statement true: 0.45 ___ 0.5
- 4.Work out an estimate for 6.4 × 3.9, by rounding each number to the nearest whole number.
- 5.Round 0.006852 to 2 significant figures.
- 6.Round 0.006482 to 2 significant figures.
- 7.3.4 × 10⁵ is written as an ordinary number. Work out this number.
- 8.Work out the highest common factor of 15 and 25.
- 9.A number, n, is equal to 3.7 when rounded to 1 decimal place. Write down the error interval for n.
- 10.Work out an estimate for 79.3 − 24.6, by rounding each number to the nearest whole number.
- 11.A number line runs from 0 to 1 and is divided into 4 equal parts. Which mark on the line represents 1/4?
- 12.Which of these units would be most appropriate to use when stating the mass of a small car?
- 13.A car travels 180 km using 6 litres of fuel. Work out the car's fuel consumption in kilometres per litre, then work out how many kilometres it can travel on a full tank of 12 litres at this rate.
- 14.A square petri dish has an area of 121 mm². A scientist wants to know its side length. Work out the side length of the dish.
- 15.Work out (−6) + (−4) × 3
Answer key
- (c) 1,000 m² — Method: round each length to 1 significant figure, then use area of a rectangle = length × width on the rounded lengths. Working: 19.6 m rounds to 20 m and 48.3 m rounds to 50 m, so the estimate is 20 × 50 = 1,000 and the area is about 1,000 m². Answer: 1,000 m². The distractors: 800 m² comes from rounding 48.3 down to 40 when the digit after its first significant figure is 8 and sends it up to 50, giving 20 × 40 = 800; 140 m² is the perimeter of the rounded rectangle, 2 × 20 + 2 × 50 = 140, not its area; 70 m² comes from adding the rounded lengths, 20 + 50 = 70, instead of multiplying them.
- (c) 3.95 — The digit after the second decimal place is 7, which is 5 or more, so round the second decimal place up: 3.947 rounds to 3.95. A candidate who truncated instead of rounding, simply cutting off after 2 decimal places, wrote 3.94. A candidate who rounded to 1 decimal place instead of 2 wrote 3.9. A candidate who rounded up but mishandled the carry wrote 4.0.
- (c) < — Compare the two decimals by their value, not by how many digits they have: 0.45 is worth less than half, while 0.5 is exactly half, so 0.45 is smaller. The correct symbol is <, since 0.45 is less than 0.5. Choosing > treats 0.45 as bigger because it has more digits after the decimal point than 0.5 — extra decimal digits do not make a number bigger. Choosing = comes from rounding 0.45 to 1 decimal place, 0.5, and then treating the rounded value as if it were the original number. Choosing ≥ would mean 0.45 is greater than or equal to 0.5, which is false in both parts, since 0.45 is neither equal to nor bigger than 0.5. So 0.45 < 0.5.
- (c) 24 — Method: round each number to the nearest whole number, then multiply the rounded values. Working: 6.4 rounds to 6 (nearest whole number) and 3.9 rounds to 4 (nearest whole number). 6 × 4 = 24. Answer: 24. 18 comes from rounding 3.9 down to 3 instead of up to the nearest whole number, 4, giving 6 × 3. 28 comes from rounding 6.4 up to 7 instead of down to the nearest whole number, 6, giving 7 × 4. 25 is the exact value of 6.4 × 3.9, which is 24.96, rounded to the nearest whole number after multiplying, rather than estimated by rounding first.
- (a) 0.0069 — Leading zeros are not significant, so the significant figures in 0.006852 start at 6: 6, 8, 5, 2. Rounding to 2 significant figures means keeping 6 and 8, and looking at the next digit, 5, to decide whether to round up. Since 5 rounds up, the second significant figure increases from 8 to 9: 0.006852 rounds to 0.0069. A candidate who rounded to 1 significant figure instead of 2 wrote 0.007. A candidate who rounded to 3 significant figures instead of 2 wrote 0.00685. A candidate who did not round up despite the next digit being 5 wrote 0.0068.
- (c) 0.0065 — Leading zeros are never significant, so counting from the first non-zero digit, the first two significant figures of 0.006482 are 6 and 4. Look at the next digit along, 8, to decide whether the second figure rounds up: since 8 is 5 or more, the 4 rounds up to 5, giving 0.0065. Rounding to 2 decimal places instead of 2 significant figures gives 0.01, which answers a different question. Wrongly counting one of the leading zeros as a significant figure and stopping one figure short gives 0.006. Keeping an extra digit, as in 0.00648, gives 3 significant figures rather than 2.
- (d) 340,000 — 3.4 × 10⁵ means moving the decimal point in 3.4 five places to the right, giving 340,000. Moving it only four places gives 34,000, one place short. Moving it six places gives 3,400,000, one place too many. Treating the exponent as negative instead of positive moves the point the wrong way, giving 0.000034.
- (b) 5 — Method: list the factors of each number and pick the largest value that appears in both lists. Working: the factors of 15 are 1, 3, 5 and 15; the factors of 25 are 1, 5 and 25. The values in both lists are 1 and 5, and the larger of those is 5. Answer: 5. The distractors: 3 comes from choosing a factor of 15 without checking that it also divides 25; 15 comes from assuming that the smaller of the two numbers is always a factor of the larger one; 75 is the lowest common multiple of 15 and 25, given by taking the highest power of each prime instead of the lowest.
- (b) 3.65 ≤ n < 3.75 — Rounding to 1 decimal place means n can be up to half of one decimal place, 0.05, below or above 3.7 before it would round to a different value. This gives a lower bound of 3.7 − 0.05 = 3.65 and an upper bound of 3.7 + 0.05 = 3.75. A value exactly at 3.75 would round up to 3.8, not 3.7, so the upper bound is excluded while the lower bound, 3.65, does still round to 3.7. Writing 3.65 ≤ n ≤ 3.75 wrongly includes 3.75. Writing 3.6 ≤ n < 3.8 uses a whole decimal place, 0.1, either side instead of half of one, 0.05. Writing 3.65 < n < 3.75 wrongly excludes 3.65, which does round to 3.7.
- (b) 54 — Method: round each number to the nearest whole number, then subtract the rounded values. Working: 79.3 rounds to 79 (nearest whole number) and 24.6 rounds to 25 (nearest whole number). 79 − 25 = 54. Answer: 54. 54.7 is the exact value of 79.3 − 24.6, found without rounding first, so it is not an estimate. 55 comes from rounding 24.6 down to 24 instead of up to the nearest whole number, 25, giving 79 − 24. 59 comes from rounding 24.6 to the nearest 10, 20, instead of to the nearest whole number, 25, giving 79 − 20.
- (d) the first mark after 0 — Method: when a unit length is split into equal parts, each gap is one part of the whole, so 1/4 is one gap along from 0. Working: four equal parts means each gap measures 1/4, so the marks after 0 stand for 1/4, 2/4, 3/4 and 4/4. One gap along from 0 is therefore the mark for 1/4. Answer: the first mark after 0. The distractors: the second mark after 0 comes from counting 0 itself as the first mark; the third mark after 0 comes from counting back from the 1 end instead of forward from 0; the fourth mark after 0 comes from reading the 4 in the denominator as the number of the mark rather than the number of parts.
- (a) Kilograms — A small car has a mass of roughly 1000–1500 kilograms, so kilograms gives a sensible number to work with — neither too small nor too large. Grams would give an enormous number, over a million, since grams suit much lighter objects. Litres measures capacity, not mass, so it is the wrong type of unit for a car's mass entirely. Metres measures length, not mass, so it is also the wrong type of unit.
- (d) 360 km — Method: first find the kilometres per litre by dividing distance by fuel used, then multiply this rate by the new tank size. Working: 180 ÷ 6 = 30 km per litre; 30 × 12 = 360 km. Answer: 360 km. 30 km comes from finding the correct fuel consumption but stopping there, without scaling it up to the full tank. 2160 km comes from multiplying the original distance (180) by the tank size (12) directly, skipping the unit rate. 90 km comes from pairing the numbers the wrong way round: dividing the distance by the new tank size, 180 ÷ 12 = 15, and then multiplying by the original 6 litres, 15 × 6 = 90.
- (d) 11 mm — Method: for a square, the side length is the square root of the area. Working: 11 × 11 = 121, so the side length is 11 mm. 60.5 mm comes from working out 121 ÷ 2 = 60.5, halving the area instead of finding its square root. 242 mm comes from working out 121 × 2 = 242, doubling the area instead of finding its square root. 22 mm comes from working out 11 × 2 = 22, doubling the correct side length. Answer: 11 mm.
- (b) −18 — Method: the multiplication is carried out before the addition, and a negative multiplied by a positive is negative. Working: (−4) × 3 = −12, so the calculation becomes (−6) + (−12) = −18. Answer: −18. The distractors: −30 comes from adding first and multiplying afterwards, giving (−6 + −4) × 3 = −10 × 3 = −30; 6 comes from treating (−4) × 3 as +12 on the grounds that a minus sign makes a product positive, giving −6 + 12 = 6; 18 comes from ignoring both minus signs and working out 6 + 4 × 3 = 18.
Build your own mix at the worksheet builder.