Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (c) £8.20 — Method: find the total cost, then subtract from the amount paid. Working: 35 × £1.48 = £51.80. Amount paid = 3 × £20 = £60.00. Change = £60.00 − £51.80 = £8.20. Answer: £8.20. (£58.52 comes from forgetting to multiply the price by the 35 litres and subtracting only £1.48 from £60. £7.50 comes from rounding £1.48 up to £1.50 before multiplying, giving a total of £52.50 instead of £51.80. £9.20 comes from miscarrying in the pence column when subtracting £51.80 from £60.00.)
- (a) 4.5 × 10⁴ — 45,000 = 4.5 × 10,000 = 4.5 × 10⁴, with the coefficient between 1 and 10 as standard form requires. Writing 45 × 10³ keeps the coefficient too large — 45 is not between 1 and 10. Writing 4.5 × 10³ undercounts the places moved, giving only 4,500. Writing 4.5 × 10⁵ overcounts the places moved, giving 450,000.
- (b) 18.5 ≤ T < 18.7 — Method: the error interval reaches half the rounding unit either side of the recorded value. Working: half of 0.2 is 0.1, so the interval runs from 18.6 − 0.1 to 18.6 + 0.1. Answer: 18.5 ≤ T < 18.7. (18.4 ≤ T < 18.8 comes from using the full rounding unit, 0.2, either side instead of half of it. 18.5 ≤ T ≤ 18.7 comes from including the upper bound with ≤ instead of excluding it with <. 18.6 ≤ T < 18.8 comes from treating the recorded value as the start of the interval and adding the whole rounding unit, 0.2, above it.)
- (b) 245 ≤ m < 255 — Method: a mass given to the nearest 10 g lies within half of 10 g, that is 5 g, of the figure written down. The lower limit is included because it rounds up to that figure, and the upper limit is excluded because it rounds up to the next multiple of 10. Working: 250 − 5 = 245 and 250 + 5 = 255, and a mass of 245 g rounds to 250 g while a mass of 255 g rounds to 260 g. Answer: 245 ≤ m < 255. The distractors: 240 ≤ m < 260 goes a whole 10 g either side instead of half of it; 245 < m ≤ 255 has the two limits the wrong way round; 240 ≤ m < 250 treats the stated 250 g as the largest mass possible, as though rounding were always upwards.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (d) −1.4, −6/5, 0, 5/4, 1.3 — Method: convert the fractions 5/4 and −6/5 to decimals so every number is written the same way, then compare all five decimals. Working: 5/4 = 1.25 and −6/5 = −1.2. Comparing −1.4, −1.2, 0, 1.25 and 1.3 in size gives the order −1.4, −1.2, 0, 1.25, 1.3. Answer: −1.4, −6/5, 0, 5/4, 1.3. −6/5, −1.4, 0, 5/4, 1.3 swaps the two negative numbers, treating −6/5 as more negative than −1.4 even though −1.2 is closer to zero than −1.4. 1.3, 5/4, 0, −6/5, −1.4 lists the numbers from largest to smallest instead of smallest to largest. −1.4, −6/5, 0, 1.3, 5/4 swaps 5/4 and 1.3, comparing the numerator 5 directly with 1.3 instead of converting 5/4 to the decimal 1.25 first.
- (a) 2 — Method: systematically try each possible number of 20p coins, starting from one, and check whether the amount left over can be made exactly using whole 10p coins. Working: one 20p coin leaves 40p, made from four 10p coins — valid. Two 20p coins leave 20p, made from two 10p coins — valid. Three 20p coins leave 0p, which needs zero 10p coins — not valid, since at least one 10p coin is required. So there are 2 different ways. Answer: 2. 3 comes from counting the case of three 20p coins and no 10p coins as if it were allowed, even though at least one 10p coin is required. 4 comes from ignoring the 'at least one of each' condition altogether and counting every way of making 60p, including three 20p coins with no 10p coins and six 10p coins with no 20p coins. 1 comes from finding only one of the two valid combinations and stopping the systematic list too early.
- (d) 24.69 — To round to 2 decimal places, look only at the third decimal digit to decide whether the second decimal digit rounds up. In 24.6851 the third decimal digit is 5, and since 5 is 5 or more, the second decimal digit rounds up from 8 to 9, giving 24.69. Rounding to 1 decimal place instead of 2 gives 24.7, one place value too coarse. Keeping the third decimal digit rather than dropping it gives 24.685, which is 3 decimal places. Looking at the fourth decimal digit, 1, instead of the third one, and wrongly deciding that no rounding is needed, leaves the length unrounded at 24.68.
- (a) 7 — Convert the mixed number to an improper fraction: 5 1/4 = 21/4. Dividing by 3/4 means multiplying by its reciprocal, 4/3: 21/4 × 4/3 gives 84/12, which simplifies to 7. So exactly 7 complete pieces of 3/4 m can be cut. Ignoring the 1/4 m and dividing only the whole number, 5 ÷ 3/4, gives 20/3, which is 6 complete pieces with some wood left over. Multiplying by 3/4 instead of its reciprocal, 21/4 × 3/4, gives 63/16, which is 3 complete pieces. Misreading 5 1/4 as the fraction 5/4, then dividing by 3/4, gives 5/3, which is only 1 complete piece. So 7 complete pieces can be cut from the plank.
- (c) 4 × 10⁻¹ — Multiply the A values: 8 × 5 = 40. Add the powers of 10: −5 + 3 = −2, giving 40 × 10⁻². Since A must satisfy 1 ≤ A < 10, rewrite 40 as 4 × 10¹, so 40 × 10⁻² = 4 × 10¹ × 10⁻² = 4 × 10⁻¹. A candidate who stopped at 40 × 10⁻² did the index arithmetic correctly but left the answer outside standard form, since 40 is not between 1 and 10. A candidate who adjusted the A value to 4 correctly but then took the power of 10 by subtracting the two given powers, −5 − 3 = −8, wrote 4 × 10⁻⁸. A candidate who adjusted the A value to 4 but multiplied the two given powers, −5 × 3 = −15, wrote 4 × 10⁻¹⁵. Both of these forgot that multiplying in standard form means adding the powers.
- (b) 3.65 ≤ n < 3.75 — Rounding to 1 decimal place means n can be up to half of one decimal place, 0.05, below or above 3.7 before it would round to a different value. This gives a lower bound of 3.7 − 0.05 = 3.65 and an upper bound of 3.7 + 0.05 = 3.75. A value exactly at 3.75 would round up to 3.8, not 3.7, so the upper bound is excluded while the lower bound, 3.65, does still round to 3.7. Writing 3.65 ≤ n ≤ 3.75 wrongly includes 3.75. Writing 3.6 ≤ n < 3.8 uses a whole decimal place, 0.1, either side instead of half of one, 0.05. Writing 3.65 < n < 3.75 wrongly excludes 3.65, which does round to 3.7.
- (b) £37 — One box costs £4 + £3 = £7. Five boxes cost 5 × £7 = £35. Adding the single £2 delivery fee gives £35 + £2 = £37. A candidate who added the £2 delivery fee to each box instead of once for the whole order worked out 5 × (£7 + £2) = 5 × £9 = £45. A candidate who forgot the £3 markup and used the shop's buying price worked out 5 × £4 + £2 = £22. A candidate who added the £3 markup only once, after multiplying the buying price by 5, worked out 5 × £4 + £3 + £2 = £25.
- (c) 3 × 10⁶ — Daily revenue = (4 × 10³) × 2.5 = 1 × 10⁴ (£10,000). Multiplying by the number of days, (3 × 10²), gives annual revenue = (1 × 10⁴) × (3 × 10²) = 3 × 10⁶ (£3,000,000). A candidate who forgot to multiply by the price and just multiplied the number of items by the number of days worked out (4 × 10³) × (3 × 10²) = 1.2 × 10⁶. A candidate who added the number of days to the daily revenue instead of multiplying worked out 1 × 10⁴ + 3 × 10² = 1.03 × 10⁴. A candidate who misread £2.50 as £25 worked out a daily revenue of (4 × 10³) × 25 = 1 × 10⁵, giving an annual total of (1 × 10⁵) × (3 × 10²) = 3 × 10⁷.
- (a) 7.5 × 10⁴ — Standard form is A × 10ⁿ, where A is between 1 and 10 (1 ≤ A < 10) and n is an integer — 7.5 × 10⁴ satisfies all of this. 12 × 10³ fails because 12 is not below 10. 0.5 × 10⁴ fails because 0.5 is not at least 1. 6.2 × 4⁵ fails because standard form always uses a power of 10, not a power of 4.
- (c) 4.1 × 10³, 3.2 × 10⁴, 2.9 × 10⁵ — The exponent decides the size first: 10³ is smaller than 10⁴, which is smaller than 10⁵, so the order is 4.1 × 10³, then 3.2 × 10⁴, then 2.9 × 10⁵. Reversing the whole list gives largest to smallest instead of smallest to largest. Comparing 3.2 × 10⁴ and 4.1 × 10³ by their coefficients alone, 3.2 against 4.1, and swapping them ignores that 10⁴ is bigger than 10³ regardless of the coefficient. Comparing 2.9 × 10⁵ and 3.2 × 10⁴ by their coefficients alone and swapping them makes the same mistake at the top of the list.
Build your own mix at the worksheet builder.