Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) 600 — Method: the number of seats is the number of rows multiplied by the number of seats in each row, so round each number to 1 significant figure and then multiply the rounded values, which is quick because a product of two multiples of ten is found by multiplying the non-zero digits and attaching the zeros. Working: 21 rounds to 20 and 29 rounds to 30; 2 × 3 = 6, and 20 and 30 carry one zero each, so two zeros follow the 6. Answer: about 600 seats. The distractors: 50 comes from adding the two rounded numbers instead of multiplying them, 20 + 30; 60 comes from multiplying 20 by the 3 of 30 and forgetting the zero in 30; 6,000 comes from attaching three zeros to 2 × 3 when 20 and 30 provide only two between them.
- (b) (60 + 4.5π) cm² — Method: find the area of the rectangle and the area of the semicircle separately, then add them. Working: the rectangle has area 10 × 6 = 60 cm². The semicircle has radius 3 cm, so its area is half of π × 3² = half of 9π = 4.5π cm². Total area = (60 + 4.5π) cm². Answer: (60 + 4.5π) cm². (60 + 18π) cm² comes from using the diameter (6 cm) as the radius in the semicircle area formula: half of π × 6² = 18π. (60 + 9π) cm² comes from forgetting to halve the full circle's area: π × 3² = 9π. (60 + 3π) cm² comes from finding the semicircle's arc length instead of its area: half of 2 × π × 3 = 3π.
- (b) (2 + 3) × 5 − 1 — 2 + 3 = 5, then 5 × 5 = 25, then 25 − 1 = 24, so the brackets belong around 2 + 3. Placing them around 5 − 1 instead gives 5 − 1 = 4, then 3 × 4 = 12, then 2 + 12 = 14. Leaving the multiplication bracketed instead changes nothing, because it already had priority: 3 × 5 = 15, then 2 + 15 = 17, then 17 − 1 = 16. Bracketing both 2 + 3 and 5 − 1 uses two pairs instead of the one asked for: 2 + 3 = 5, 5 − 1 = 4, then 5 × 4 = 20.
- (a) −3 °C — Method: write each reading as a signed temperature, then choose the one further to the right on a number line. Working: 8 °C below zero is −8 °C and 3 °C below zero is −3 °C. On a number line −3 lies to the right of −8, so it is the warmer reading. Answer: −3 °C. The distractors: −8 °C comes from ordering negatives by the size of their digits, treating −8 as the larger number; 3 °C has the right size but the sign dropped, and a reading of 3 °C is above zero rather than below it; 5 °C comes from working out the difference between the two readings instead of choosing one of them.
- (c) 5 × 10⁻³ — Method: in standard form the coefficient must be at least 1 and less than 10, and for a number smaller than 1 the index is negative and counts the places the decimal point moves to the right. Working: the only significant digit is 5, so the coefficient is 5; moving the decimal point in 0.005 three places to the right gives 5, so the index is −3. Answer: 5 × 10⁻³. The distractors: 0.5 × 10⁻² is the same value written the wrong way, because 0.5 is smaller than 1 and so is not an allowed coefficient; 5 × 10⁻² comes from counting the two zeros after the decimal point instead of the three places the point moves; 5 × 10³ comes from taking the index as positive, which describes a number in the thousands rather than one smaller than 1.
- (b) 18 — Method: multiply the two numbers ignoring their signs, then apply the rule that a negative number multiplied by a negative number gives a positive answer. Working: 6 × 3 = 18; since both −6 and −3 are negative, the product is positive. Answer: 18. −18 comes from keeping the answer negative, as if only one of the two negative signs affects the sign of the product. −9 comes from adding the two numbers instead of multiplying them, −6 + (−3) = −9. 9 comes from adding 6 and 3 as if both numbers were positive, ignoring the negative signs entirely.
- (a) 3.8 × 10⁻³ — 0.0038 is less than 1, so the power of 10 is negative. Moving the decimal point 3 places gives A = 3.8, so 0.0038 = 3.8 × 10⁻³. A candidate who wrote 3.8 × 10³ used a positive power, which is only correct for numbers of 10 or more. A candidate who wrote 38 × 10⁻⁴ used a value of A outside the required range. A candidate who wrote 3.8 × 10⁻⁴ counted one place too many when moving the decimal point.
- (c) 20 — Method: work out each power separately before subtracting. Working: 6² = 36 and 4² = 16, so 6² − 4² = 36 − 16 = 20. Answer: 20. (4 comes from subtracting first, 6 − 4 = 2, and then squaring that result, instead of squaring each number first. 52 comes from adding the two squares, 36 + 16, instead of subtracting them. 2 comes from subtracting the two numbers, 6 − 4, and forgetting to square at all.)
- (b) 18.5 ≤ T < 18.7 — Method: the error interval reaches half the rounding unit either side of the recorded value. Working: half of 0.2 is 0.1, so the interval runs from 18.6 − 0.1 to 18.6 + 0.1. Answer: 18.5 ≤ T < 18.7. (18.4 ≤ T < 18.8 comes from using the full rounding unit, 0.2, either side instead of half of it. 18.5 ≤ T ≤ 18.7 comes from including the upper bound with ≤ instead of excluding it with <. 18.6 ≤ T < 18.8 comes from treating the recorded value as the start of the interval and adding the whole rounding unit, 0.2, above it.)
- (a) 8.35 ≤ L < 8.45 — Method: a length rounded to 1 decimal place lies within half of 0.1 cm, that is 0.05 cm, of the value written down. The lower limit is included because it rounds up to that value, and the upper limit is excluded because it rounds up to the next value instead. Working: 8.4 − 0.05 = 8.35 and 8.4 + 0.05 = 8.45, so a length of 8.35 cm still rounds to 8.4 cm while a length of 8.45 cm rounds to 8.5 cm. Answer: 8.35 ≤ L < 8.45. The distractors: 8.3 ≤ L < 8.5 goes a whole 0.1 cm either side instead of half of it; 8.35 < L ≤ 8.45 has the two limits the wrong way round, excluding the length that does round to 8.4 cm and including the one that does not; 8.4 ≤ L < 8.5 is the interval for a length truncated to 1 decimal place, not one rounded to it.
- (a) 7/8, 17/20, 0.8, 78% — Method: convert every value to a decimal, then order the decimals from largest to smallest. Working: 7/8 = 0.875, 17/20 = 0.85, 0.8 = 0.8, 78% = 0.78. Ordering from largest to smallest gives 7/8, 17/20, 0.8, 78%. Answer: 7/8, 17/20, 0.8, 78%. '78%, 0.8, 17/20, 7/8' comes from ordering the converted decimals from smallest to largest instead of largest to smallest. '17/20, 7/8, 0.8, 78%' comes from converting 17/20 incorrectly as larger than 7/8, for example treating 17/20 as 0.87 instead of 0.85, swapping the top two. '7/8, 0.8, 17/20, 78%' comes from converting 17/20 incorrectly as equal to 0.8, swapping the middle two.
- (c) 2700 cm² — Convert both lengths to the same unit before multiplying: 0.6 m = 60 cm. The area is 45 × 60 = 2700 cm². Multiplying without converting 0.6 m to centimetres at all, treating it as 0.6 cm, gives 45 × 0.6 = 27 cm². Converting 0.6 m to centimetres by multiplying by 10 instead of 100 gives 6 cm, and 45 × 6 = 270 cm². Converting 0.6 m to centimetres by multiplying by 1000 instead of 100 gives 600 cm, and 45 × 600 = 27000 cm².
- (c) 0.0479 — Method: round each option to 2 significant figures and check which one gives 0.048. Working: for 0.0479, the first two significant figures are 4 and 7; the next digit is 9, so 7 rounds up to 8, giving 0.048. For 0.0485, the first two significant figures are 4 and 8; the next digit is 5, so 8 rounds up to 9, giving 0.049, not 0.048. 0.052 already has exactly 2 significant figures, 5 and 2, so it stays as 0.052 and does not round to 0.048 at all. 0.04 has only 1 significant figure, so it is already less precise than the 2 significant figures asked for. Answer: 0.0479.
- (a) x⁶ — Method: work through the powers in order — multiplying powers of the same base means adding indices, and dividing powers of the same base means subtracting indices. Working: first, x⁵ × x³ = x⁸ (adding 5 and 3); then x⁸ ÷ x² = x⁶ (subtracting 2 from 8). x⁴ comes from swapping the two rules — subtracting for the multiplication, 5 − 3 = 2, and then adding for the division, 2 + 2 = 4. x¹⁰ comes from adding all three indices, 5 + 3 + 2 = 10, treating the division the same as a multiplication. 6x comes from correctly reaching a total index of 6 but then writing it as a coefficient of x instead of as its power. Answer: x⁶.
- (b) 4/9 — Method: double the butter part of the ratio, keeping flour the same, find the new total, then write butter's part over the new total. Working: the new ratio is flour : butter = 5 : 4, since butter doubles from 2 to 4. New total = 5 + 4 = 9. Fraction of butter = 4/9. Answer: 4/9. 2/9 comes from forgetting to double the butter part and using the original value 2 over the new total of 9. 4/7 comes from doubling the butter part correctly to 4 but keeping the old total of 7 instead of working out the new total. 2/5 comes from using the original ratio 5:2 directly as butter over flour without doubling anything.
Build your own mix at the worksheet builder.