Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) £4.80 — Method: find the error interval, then check which value falls outside it. Working: half of 20p is 10p, so the actual cost, c, satisfies £4.50 ≤ c < £4.70. £4.80 is above £4.70, so it could not be the actual cost. Answer: £4.80. (£4.50 is a genuine possible cost — it sits at the included lower boundary. £4.65 is a genuine possible cost, below the £4.70 upper boundary. £4.55 is a genuine possible cost, well inside the interval.)
- (a) 6 — Method: list the factors of each number and compare them. Working: the factors of 18 are 1, 2, 3, 6, 9, 18; the factors of 24 are 1, 2, 3, 4, 6, 8, 12, 24. The only option that appears in both lists is 6. 8 is a factor of 24 but not of 18. 9 is a factor of 18 but not of 24. 12 is a factor of 24 but not of 18. Answer: 6.
- (a) 6/11 — Method: add the parts of the ratio to find the total, then write the required part over the total. Working: 5 + 6 = 11 parts in total; lemons make up 6 of the 11 parts, so the fraction of lemons is 6/11, which is already in its simplest form. Answer: 6/11. 5/11 comes from finding the fraction of oranges instead of lemons. 5/6 comes from writing the ratio of oranges to lemons directly as a fraction instead of comparing lemons to the total. 6/5 comes from writing the ratio of lemons to oranges directly as a fraction instead of comparing lemons to the total.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (a) 20 — Method: round each number to 1 significant figure, then divide. Working: 397 rounds to 400 and 21 rounds to 20, so the estimate is 400 ÷ 20 = 20. Answer: 20. The distractors: 19 comes from not estimating at all, since 397 ÷ 21 = 18.9 to 1 decimal place, which rounds to 19, while the question asks for an estimate from rounded numbers; 200 comes from dividing 400 by 2 instead of by 20, losing the place value of the rounded divisor; 2 comes from dividing the leading digits only and losing the place value of both numbers.
- (c) 0.94 — Method: a fraction is written as a decimal by making the denominator a power of ten, because the decimal places record tenths, hundredths and thousandths. Working: 50 × 2 = 100, so the numerator must also be multiplied by 2, giving 47 × 2 = 94 and the equivalent fraction 94/100; 94 hundredths is written with two digits after the decimal point. Answer: 0.94. The distractors: 0.47 comes from treating the denominator as though it were already 100 and writing the digits of the numerator straight after the point; 4.7 comes from dividing 47 by 10 instead of by 50; 0.094 comes from multiplying the denominator by 20 to reach 1000 but the numerator by only 2, giving 94/1000.
- (a) 4.5 × 10⁴ — 45,000 = 4.5 × 10,000 = 4.5 × 10⁴, with the coefficient between 1 and 10 as standard form requires. Writing 45 × 10³ keeps the coefficient too large — 45 is not between 1 and 10. Writing 4.5 × 10³ undercounts the places moved, giving only 4,500. Writing 4.5 × 10⁵ overcounts the places moved, giving 450,000.
- (c) £7.05 — Tom is correct — Method: multiply the cost of one jar by the number of jars, then compare the total to £7. Working: 3 × £2.35 = £7.05, and since £7.05 is more than £7, Tom's claim is correct. Answer: £7.05 — Tom is correct. "£7.05 — Tom is incorrect" comes from reaching the right total but reading the 05 after the point as making the amount less than £7. "£6.95 — Tom is incorrect" comes from working out 3 × 35p as 3 × 30p + 5p = 95p, multiplying only the tens digit, and adding it to 3 × £2 = £6. "£7.20 — Tom is correct" comes from rounding £2.35 up to £2.40 before multiplying: 3 × £2.40 = £7.20.
- (d) −6 — Method: check each option to see if it falls strictly between −8 and −5, remembering that numbers become smaller as they get more negative. Working: −8 < −6 < −5, so −6 lies between them. Answer: −6. −9 comes from a value that is more negative than −8, so it lies outside the range, below −8. −4 comes from a value that is less negative than −5, so it lies outside the range, above −5. 6 comes from ignoring the negative signs and picking a positive number between 5 and 8.
- (d) 0.024 cm — Method: significant figures are counted from the first non-zero digit; the zeros in front of it only fix the place value and are not significant. Working: in 0.02384 the first significant figure is 2 and the second is 3, so the rounding is decided by the next digit, 8. As 8 is 5 or more, the second significant figure goes up from 3 to 4, in the same place value. Answer: 0.024 cm. The distractors: 0.023 cm comes from chopping the 84 off instead of rounding it; 0.02 cm comes from counting the leading zeros as significant figures, so the 2 is taken as the second figure and the rounding stops there; 0.0238 cm is 0.02384 correct to 3 significant figures, one figure too many.
- (c) £70 — Method: 20% of an amount is 20/100 of it; a reliable route is to find 10% by dividing by 10 and then double it. Working: 10% of £350 is £350 ÷ 10 = £35, and 20% is twice as much, £35 × 2 = £70. Answer: £70. The distractors: £35 comes from finding 10% and stopping there; £17.50 comes from reading 20% as one twentieth and working out £350 ÷ 20 = £17.50; £280 comes from taking 20% off the money raised rather than finding 20% of it, giving £350 ÷ 5 = £70 and then £350 − £70 = £280.
- (a) 0.55, 58%, 3/5 — Converting all three to decimals: 3/5 = 0.6, 0.55 stays as 0.55, and 58% = 0.58. In order from smallest to largest, this is 0.55, then 58%, then 3/5. Writing the numbers in the reverse order, largest to smallest, gives 3/5, 58%, 0.55. Misconverting 3/5 as 0.5 instead of 0.6 makes it appear smaller than both other values, giving the order 3/5, 0.55, 58%. Misconverting 58% as 0.058 instead of 0.58, by moving the decimal point two extra places, makes it appear smallest of the three, giving the order 58%, 0.55, 3/5.
- (b) 18.5 ≤ T < 18.7 — Method: the error interval reaches half the rounding unit either side of the recorded value. Working: half of 0.2 is 0.1, so the interval runs from 18.6 − 0.1 to 18.6 + 0.1. Answer: 18.5 ≤ T < 18.7. (18.4 ≤ T < 18.8 comes from using the full rounding unit, 0.2, either side instead of half of it. 18.5 ≤ T ≤ 18.7 comes from including the upper bound with ≤ instead of excluding it with <. 18.6 ≤ T < 18.8 comes from treating the recorded value as the start of the interval and adding the whole rounding unit, 0.2, above it.)
- (b) 14 — Method: the greatest number of identical rows is the highest common factor of the two bulb totals, found by taking every prime factor the two totals share. Working: 42 = 2 × 3 × 7 and 56 = 2 × 2 × 2 × 7, so the prime factors common to both are 2 and 7, giving a highest common factor of 2 × 7 = 14. 2 comes from taking only the common factor 2 and forgetting the common factor 7. 7 comes from taking only the common factor 7 and forgetting the common factor 2. 168 is the lowest common multiple of 42 and 56, not their highest common factor. Answer: 14.
- (a) x⁶ — Method: work through the powers in order — multiplying powers of the same base means adding indices, and dividing powers of the same base means subtracting indices. Working: first, x⁵ × x³ = x⁸ (adding 5 and 3); then x⁸ ÷ x² = x⁶ (subtracting 2 from 8). x⁴ comes from swapping the two rules — subtracting for the multiplication, 5 − 3 = 2, and then adding for the division, 2 + 2 = 4. x¹⁰ comes from adding all three indices, 5 + 3 + 2 = 10, treating the division the same as a multiplication. 6x comes from correctly reaching a total index of 6 but then writing it as a coefficient of x instead of as its power. Answer: x⁶.
Build your own mix at the worksheet builder.