Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) −2 — Method: place the two end values on a number line and list the integers that sit strictly between them. Working: reading from left to right the integers run −4, −3, −2, −1, so the values strictly between the ends are −3 and −2. Only one of those is offered. Answer: −2. The distractors: −5 comes from ordering negatives by the size of their digits, which wrongly places −5 to the right of −4; 0 comes from carrying on past −1 instead of stopping at it; 2 comes from ignoring the minus signs and choosing a number between 1 and 4.
- (a) 5 — Method: each index is worked out first, and subtracting a negative number is the same as adding the positive. Working: (−2)³ = (−2) × (−2) × (−2) = −8 and (−3)² = (−3) × (−3) = 9, while − (−4) becomes + 4, so the calculation becomes −8 + 9 + 4 = 5. Answer: 5. The distractors: −13 comes from taking (−3)² as −9, giving −8 − 9 + 4 = −13; −3 comes from reading − (−4) as − 4, giving −8 + 9 − 4 = −3; 21 comes from treating every power of a negative number as positive, so that (−2)³ is taken as 8 and the calculation becomes 8 + 9 + 4 = 21.
- (d) £120 — Total parts = 5 + 3 = 8, so one part is worth 320 ÷ 8 = 40 pounds. The cake sale is 3 parts, so it raised 3 × 40 = 120 pounds. £200 comes from working out the raffle's share, 5 × 40, instead of the cake sale's share. £40 comes from finding the value of one part but forgetting to multiply by 3. £192 comes from dividing the total by 5 instead of 8 to find the value of one part, 320 ÷ 5 = 64, then multiplying by 3, 3 × 64 = 192.
- (d) 1 × 10⁻³ — Method: for a number smaller than 1 the index is negative, and it counts the places the decimal point moves to the right to leave a coefficient between 1 and 10. Working: the only significant digit is 1, so the coefficient is 1; the decimal point in 0.001 moves three places to the right to reach that 1, so the index is −3. Answer: 1 × 10⁻³. The distractors: 1 × 10³ comes from taking the index as positive, which describes one thousand grams rather than one thousandth of a gram; 0.1 × 10⁻² is the same mass written with a coefficient of 0.1, which is smaller than 1 and so is not standard form; 1 × 10⁻⁴ comes from counting the zero in front of the decimal point as well as the places after it.
- (d) 51 is not prime, because 51 = 3 × 17. — Check 51 for small prime factors: 51 ÷ 3 = 17, and both 3 and 17 are themselves prime, so 51 = 3 × 17 and 51 is not a prime number — it has factors other than 1 and itself. Checking only 2, 3 and 5 and concluding wrongly that none of them divide 51 misses that 3 does divide it exactly, so the claim that 51 is prime because it avoids 2, 3 and 5 is false. Assuming any odd number must be prime ignores that 51 = 3 × 17 is a counterexample — plenty of odd numbers are not prime. Misreading 51 as the even number 52 leads to the false claim that it is divisible by 2; 51 itself is odd, and 2 is not one of its factors. So 51 is not prime, because 51 = 3 × 17.
- (d) 15:20 — Method: add all three journey segments to the departure time, converting the total number of minutes into hours and minutes. Working: 55 + 20 + 40 = 115 minutes = 1 hour 55 minutes. 13:25 + 1 hour 55 minutes = 15:20. Answer: 15:20. (15:00 comes from leaving out the 20 minute break and adding only 55 + 40 = 95 minutes. 14:25 comes from leaving out the 55 minute first leg and adding only 20 + 40 = 60 minutes. 14:40 comes from leaving out the 40 minute second leg and adding only 55 + 20 = 75 minutes.)
- (a) 0.625 — Method: convert the fraction to a decimal so it can be compared properly with 0.6. Working: 5/8 = 0.625, and since 0.625 > 0.6, the larger value is 0.625. Answer: 0.625. 0.6 repeats Sam's incorrect claim, made by comparing single digits rather than full place value. 0.58 comes from converting 5/8 incorrectly, treating it as if it read 5 tenths and 8 hundredths. 0.85 comes from turning the fraction upside down and writing its digits straight after the decimal point, 8 then 5, instead of dividing.
- (b) 3.65 ≤ n < 3.75 — Rounding to 1 decimal place means n can be up to half of one decimal place, 0.05, below or above 3.7 before it would round to a different value. This gives a lower bound of 3.7 − 0.05 = 3.65 and an upper bound of 3.7 + 0.05 = 3.75. A value exactly at 3.75 would round up to 3.8, not 3.7, so the upper bound is excluded while the lower bound, 3.65, does still round to 3.7. Writing 3.65 ≤ n ≤ 3.75 wrongly includes 3.75. Writing 3.6 ≤ n < 3.8 uses a whole decimal place, 0.1, either side instead of half of one, 0.05. Writing 3.65 < n < 3.75 wrongly excludes 3.65, which does round to 3.7.
- (c) 12.3 ≤ t < 12.4 — Method: truncating cuts the later digits off instead of rounding them, so nothing is ever pushed upwards. The displayed value is therefore the smallest the time can be, and the time can run up to, but not reach, the next value the display can show. Working: the display reads 12.3, so the actual time is at least 12.3 seconds; as soon as the time reaches 12.3 + 0.1 = 12.4 seconds the display would read 12.4, so 12.4 is not included. Answer: 12.3 ≤ t < 12.4. The distractors: 12.25 ≤ t < 12.35 is the interval for a time rounded to 1 decimal place, and this display does not round; 12.3 < t ≤ 12.4 excludes the one value the display certainly allows and includes the one it rules out; 12.3 ≤ t ≤ 12.4 treats 12.4 seconds as possible, but at 12.4 seconds the display would no longer read 12.3.
- (d) −6 — Method: check each option to see if it falls strictly between −8 and −5, remembering that numbers become smaller as they get more negative. Working: −8 < −6 < −5, so −6 lies between them. Answer: −6. −9 comes from a value that is more negative than −8, so it lies outside the range, below −8. −4 comes from a value that is less negative than −5, so it lies outside the range, above −5. 6 comes from ignoring the negative signs and picking a positive number between 5 and 8.
- (d) 1,000 — Method: round each number to 1 significant figure, then multiply the rounded values. Working: 49 rounds to 50 and 21 rounds to 20, and 50 × 20 = 1,000 because 5 × 2 = 10 and the two rounded numbers carry one zero each. Answer: 1,000. The distractors: 800 comes from rounding 49 down to 40 instead of to the nearest ten; 1,500 comes from rounding 21 up to 30 rather than down to 20; 1,029 is the exact product 49 × 21, worked out in full when the question asks for an estimate.
- (c) 24 — Method: round each number to the nearest whole number, then multiply the rounded values. Working: 6.4 rounds to 6 (nearest whole number) and 3.9 rounds to 4 (nearest whole number). 6 × 4 = 24. Answer: 24. 18 comes from rounding 3.9 down to 3 instead of up to the nearest whole number, 4, giving 6 × 3. 28 comes from rounding 6.4 up to 7 instead of down to the nearest whole number, 6, giving 7 × 4. 25 is the exact value of 6.4 × 3.9, which is 24.96, rounded to the nearest whole number after multiplying, rather than estimated by rounding first.
- (b) 5.2 × 10⁶ — Method: write the digits as a coefficient that is at least 1 and less than 10, then count the places the decimal point moves to reach that position. Working: the digits give a coefficient of 5.2, and the decimal point travels from the end of 5,200,000 until it sits between the 5 and the 2, a move of 6 places. Answer: 5.2 × 10⁶. The distractors: 52 × 10⁵ is the same amount but not in standard form, because 52 is not less than 10; 5.2 × 10⁵ comes from counting the five zeros in 5,200,000 rather than the six places the decimal point moves; 5.2 × 10⁻⁶ comes from making the index negative because the decimal point was carried to the left.
- (a) = — Method: convert the fraction to a decimal so both numbers are in the same form. Working: 3/10 means 3 divided by 10, which is 0.3. Answer: 3/10 = 0.3, so the symbol is =. < comes from treating the fraction as smaller than the decimal without converting it first. > comes from the same mistake the other way round. ≠ comes from assuming a fraction and a decimal can never be equal.
- (a) 300 N/m² — Pressure is force ÷ area, and the unit N/m² says so: newtons divided by square metres. The calculation is 240 ÷ 0.8. Multiplying both numbers by 10 clears the decimal: 2400 ÷ 8 = 300 N/m². 192 N/m² multiplies the force by the area instead of dividing, 30 N/m² divides by 8 and so loses the decimal point, and 3000 N/m² multiplies only the force by 10 when clearing the decimal.
Build your own mix at the worksheet builder.