Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) −3 °C — Method: write each reading as a signed temperature, then choose the one further to the right on a number line. Working: 8 °C below zero is −8 °C and 3 °C below zero is −3 °C. On a number line −3 lies to the right of −8, so it is the warmer reading. Answer: −3 °C. The distractors: −8 °C comes from ordering negatives by the size of their digits, treating −8 as the larger number; 3 °C has the right size but the sign dropped, and a reading of 3 °C is above zero rather than below it; 5 °C comes from working out the difference between the two readings instead of choosing one of them.
- (d) 0.024 cm — Method: significant figures are counted from the first non-zero digit; the zeros in front of it only fix the place value and are not significant. Working: in 0.02384 the first significant figure is 2 and the second is 3, so the rounding is decided by the next digit, 8. As 8 is 5 or more, the second significant figure goes up from 3 to 4, in the same place value. Answer: 0.024 cm. The distractors: 0.023 cm comes from chopping the 84 off instead of rounding it; 0.02 cm comes from counting the leading zeros as significant figures, so the 2 is taken as the second figure and the rounding stops there; 0.0238 cm is 0.02384 correct to 3 significant figures, one figure too many.
- (a) 3.8 × 10⁻³ — 0.0038 is less than 1, so the power of 10 is negative. Moving the decimal point 3 places gives A = 3.8, so 0.0038 = 3.8 × 10⁻³. A candidate who wrote 3.8 × 10³ used a positive power, which is only correct for numbers of 10 or more. A candidate who wrote 38 × 10⁻⁴ used a value of A outside the required range. A candidate who wrote 3.8 × 10⁻⁴ counted one place too many when moving the decimal point.
- (b) 7 — Method: trap the number between the two square numbers on either side of it, then decide which of them it is nearer to. Working: 6² = 36 and 7² = 49, so √45 lies between 6 and 7; 49 − 45 = 4 while 45 − 36 = 9, so 45 is nearer to 49. Answer: 7. The distractors: 6 comes from taking the square number below 45 and stopping there, without checking which of 36 and 49 is nearer; 22.5 comes from halving 45 instead of looking for the number that multiplies by itself to give 45; 2,025 comes from squaring 45 instead of taking its square root.
- (c) 590 — To round to the nearest 10, decide which multiple of 10 the number is nearer to. 592.5 lies between 590 and 600. It is 592.5 − 590 = 2.5 above 590, but 600 − 592.5 = 7.5 below 600, so it is much nearer to 590. Equivalently, the units digit is 2, and 2 is less than 5, so round down: 592.5 rounds to 590. A candidate who wrote 600 rounded up because of the 5 in the tenths place, but that digit decides rounding to the nearest whole number, not to the nearest 10 — the units digit is what matters here. A candidate who wrote 595 rounded to the nearest 5 instead of the nearest 10. A candidate who wrote 500 cut the number down to its hundreds digit instead of rounding to the nearest 10.
- (a) The tape can only give the length to the nearest centimetre — Method: a measurement should never be written to a finer degree of accuracy than the instrument used can read. Working: the tape is marked in centimetres, so the smallest division Leah can read is 1 cm, which is 0.01 m and two decimal places in metres; writing 7.3157 m claims the length to the nearest tenth of a millimetre, four decimal places, which the markings cannot support. A record of 7.32 m, to the nearest centimetre, is what this tape justifies. Answer: The tape can only give the length to the nearest centimetre. The distractors: the nearest millimetre contradicts the markings described in the question, which are centimetres, and would still claim more accuracy than the tape offers; the rule that a length in metres must be written to 2 decimal places borrows the habit of writing money to the penny, when the accuracy of a length depends on the instrument; rounding to the nearest metre would throw away accuracy the tape genuinely provides.
- (c) 3⁻³ — Method: when dividing powers of the same base, subtract the index of the number you are dividing by from the index of the number being divided, keeping them in the order the question writes them. Working: 2 − 5 = −3, so 3² ÷ 3⁵ = 3⁻³. It is worth checking this against the numbers: 3² = 9 and 3⁵ = 243, and 9 ÷ 243 = 1/27, which is 3⁻³. 3³ comes from subtracting the other way round, 5 − 2 = 3, which reverses the sign of the index and gives 27 instead of 1/27. 3⁷ comes from working out 2 + 5 = 7, which is the rule for multiplying powers, not dividing them. 3¹⁰ comes from multiplying the indices, 2 × 5 = 10, instead of subtracting them. Answer: 3⁻³.
- (c) (12 + 3π) cm — The perimeter of a quarter-circle is made up of two straight radii plus a quarter of the circumference. The two radii give 2 × 6 = 12 cm, and a quarter of the circumference is (1/4) × 2 × π × 6 = 3π cm, so the total perimeter is (12 + 3π) cm. Giving only the curved part, 3π cm, forgets the two straight edges entirely. Using the full circumference, 2 × π × 6 = 12π, instead of a quarter of it gives (12 + 12π) cm. Including only one radius instead of two gives (6 + 3π) cm.
- (b) 25 g — Method: substitute the number of years into the model, raise the fraction to that power first, then multiply by the starting mass. Working: with n = 3 the model gives M = 200 × (1/2)³. Since (1/2)³ = 1/8, the mass is 200 ÷ 8 = 25. Answer: 25 g. The distractors: 12.5 g comes from halving four times instead of three, counting the first weighing as a year; 300 g comes from multiplying by 1/2 × 3 = 1.5 instead of raising 1/2 to the power 3; 0.125 g comes from working out (1/2)³ = 0.125 and stopping there, without multiplying by the starting mass.
- (c) 3.95 — The digit after the second decimal place is 7, which is 5 or more, so round the second decimal place up: 3.947 rounds to 3.95. A candidate who truncated instead of rounding, simply cutting off after 2 decimal places, wrote 3.94. A candidate who rounded to 1 decimal place instead of 2 wrote 3.9. A candidate who rounded up but mishandled the carry wrote 4.0.
- (c) > — Method: fractions with the same denominator are made of parts of the same size, so compare how many of those parts each fraction has. Working: both fractions are elevenths, and 6 elevenths is 2 more elevenths than 4 elevenths, so the fraction on the left is the larger one. The symbol must have its point facing the smaller side. Answer: >. The distractors: < comes from comparing the numerators the wrong way round, as though a larger numerator gave a smaller fraction; = comes from seeing the same denominator in both fractions and concluding that the fractions themselves are the same size; ≤ comes from working out the direction correctly but then picking the wrong symbol for it, reading it as though it meant 'is greater than or equal to'; ≤ means 'is less than or equal to', and 6 elevenths is neither less than nor equal to 4 elevenths.
- (b) Yes, because 14.8 cm rounds to 15 cm to the nearest cm — Method: a recorded measurement is not an exact length; it stands for every length that rounds to it, so the two records agree if one rod can produce both. Working: Ben's record of 14.8 cm to the nearest 0.1 cm means the rod is between 14.75 cm and 14.85 cm, and 14.8 is nearer to 15 than to 14, so a rod of that length is recorded as 15 cm to the nearest centimetre. Both records can therefore come from the same rod. Answer: Yes, because 14.8 cm rounds to 15 cm to the nearest cm. The distractors: the claim that 14.8 cm rounds to 15.0 cm to 1 decimal place is false, since 14.8 cm is already written to 1 decimal place and stays 14.8 cm; the claim that it rounds to 14 cm is false, because 14.8 is 0.2 away from 15 and 0.8 away from 14; the claim that the two lengths are not the same treats each record as an exact length, when each is only a rounded record of one rod.
- (d) 1/16 — Method: a negative index means the reciprocal of the power, so 2⁻⁴ is 1 divided by 2⁴. Working: 2⁴ = 2 × 2 × 2 × 2 = 16, so the value is 1/16. Answer: 1/16. The distractors: −16 comes from reading the negative index as a minus sign on the result; 16 comes from ignoring the minus sign and working out 2⁴; 1/8 comes from multiplying the base by the index, 2 × 4, and writing 1 over that product.
- (a) 25 — Reverse the operations in reverse order: undo the subtraction by adding 6, then undo the division by multiplying by 5. −1 + 6 = 5, so the number divided by 5 equals 5, and 5 × 5 = 25 — checking, 25 ÷ 5 − 6 = 5 − 6 = −1. A candidate who subtracted 6 again instead of adding worked out −1 − 6 = −7, then −7 × 5 = −35. A candidate who multiplied by 5 before undoing the subtraction, doing the inverse operations in the wrong order, worked out −1 × 5 = −5, then −5 + 6 = 1. A candidate who multiplied by 5 but forgot to undo the subtraction at all worked out −1 × 5 = −5 and stopped there.
- (a) 0.35, 3/8, 0.4 — Method: convert the fraction to a decimal so all three values can be compared directly. Working: 3/8 = 0.375, so the three values are 0.35, 0.375 and 0.4. In order from smallest to largest: 0.35, 3/8 (0.375), 0.4. Answer: 0.35, 3/8, 0.4. "3/8, 0.35, 0.4" comes from assuming a fraction must be smaller than any decimal, without converting it first. "0.4, 3/8, 0.35" comes from writing the numbers in reverse order. "0.35, 0.4, 3/8" comes from converting 3/8 by flipping it to 8/3, making it seem larger than both decimals.
Build your own mix at the worksheet builder.