Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) −5, −1, 0, 3 — Method: order the numbers by their position on a number line, smallest (furthest left) first. Working: both −5 and −1 lie to the left of 0, and 3 lies to the right of 0. Of the two negatives, −5 is 5 units from zero and −1 is 1 unit from zero, so −5 is further left. Answer: −5, −1, 0, 3. The distractors: 3, 0, −1, −5 is the correct order written the wrong way round, starting with the largest; −1, −5, 0, 3 comes from ordering the two negatives by the size of their digits, so that −1 is treated as the smaller; 0, −1, −5, 3 comes from believing that zero is the smallest number there is and then listing the negatives by their digits.
- (c) 90 — Multiply the number of choices for each course: 5 × 6 × 3 = 90. 14 comes from adding the three numbers instead of multiplying them. 30 comes from multiplying only the starters and mains, 5 × 6, and forgetting the dessert. 18 comes from multiplying only the mains and desserts, 6 × 3, and forgetting the starter.
- (d) 1 7/12 — Method: convert both mixed numbers to improper fractions with a common denominator, then subtract. Working: 3 1/4 = 39/12 and 1 2/3 = 20/12, so 39/12 − 20/12 = 19/12 = 1 7/12. Answer: 1 7/12. Chloe's method, subtracting whole numbers (3−1=2) and fraction parts (2/3−1/4=5/12) separately without exchanging, gives 2 5/12. 1 3/4 comes from converting 2/3 to twelfths incorrectly as 6/12 instead of 8/12, then subtracting. 8 comes from converting both mixed numbers to improper fractions correctly (13/4 and 5/3) but then subtracting numerators and denominators separately: (13−5)/(4−3) = 8/1.
- (c) 6 — The units digit must be even, so it can be 2 or 8, giving 2 choices. The tens digit can then be any of the remaining 3 digits, since one digit has been used for the units. Multiply: 2 × 3 = 6. 12 comes from working out how many two-digit numbers can be made in total, 4 × 3 = 12, ignoring the requirement that the number is even. 8 comes from choosing the units digit from 2 options and then wrongly allowing any of the 4 digits again for the tens digit, 2 × 4 = 8, which lets a digit repeat. 2 comes from counting only the choices for the units digit and forgetting the tens digit.
- (c) 0.7, 0.72, 3/4 — Method: numbers written in different forms cannot be compared as they stand, so every fraction is turned into a decimal by dividing the numerator by the denominator, and the decimals are then compared place by place from the left. Working: 3/4 means 3 ÷ 4 = 0.75, so the three values to compare are 0.7, 0.75 and 0.72; written to two decimal places they are 0.70, 0.75 and 0.72, and the hundredths digits 0, 5 and 2 put 0.70 first, 0.72 next and 0.75 last; written again in the forms the question used, the order from smallest is 0.7, then 0.72, then 3/4. Answer: 0.7, 0.72, 3/4. The distractors: 3/4, 0.7, 0.72 comes from turning 3/4 into 0.34 by writing the numerator and the denominator as the two digits after the point, which makes the fraction the smallest of the three; 0.72, 3/4, 0.7 comes from the belief that the more digits a decimal has the smaller it must be, which puts both 0.72 and 0.75 below 0.7 and 0.72 below 0.75; 3/4, 0.72, 0.7 comes from comparing the three values correctly but listing them largest first, against an instruction to start with the smallest.
- (d) −8, −3, 0, 2, 5 — Method: place the numbers on a number line and read them from left to right. Working: the negative numbers −8 and −3 come before 0, with −8 further left than −3 because it is further from zero in the negative direction; then 0, then the positive numbers 2 and 5 in increasing size. Answer: −8, −3, 0, 2, 5. −3, −8, 0, 2, 5 swaps −3 and −8, putting the negative number closer to zero first. 5, 2, 0, −3, −8 lists the numbers from largest to smallest instead of smallest to largest. −8, −3, 2, 0, 5 puts 2 before 0, treating positive numbers as if they always come before zero.
- (a) 300 N/m² — Pressure is force ÷ area, and the unit N/m² says so: newtons divided by square metres. The calculation is 240 ÷ 0.8. Multiplying both numbers by 10 clears the decimal: 2400 ÷ 8 = 300 N/m². 192 N/m² multiplies the force by the area instead of dividing, 30 N/m² divides by 8 and so loses the decimal point, and 3000 N/m² multiplies only the force by 10 when clearing the decimal.
- (a) 11.5 ≤ L < 12.5 — Rounding to the nearest centimetre means L can be up to half a centimetre below or above 12 before it would round to a different whole number. Half of 1 cm is 0.5 cm, so the lower bound is 12 − 0.5 = 11.5 and the upper bound is 12 + 0.5 = 12.5. A value exactly at the upper bound, 12.5, would round up to 13, not 12, so 12.5 itself is excluded, giving 11.5 ≤ L < 12.5. Writing 11.5 ≤ L ≤ 12.5 wrongly includes 12.5 on both ends. Writing 11 ≤ L < 13 uses a whole centimetre either side instead of half a centimetre. Writing 11.5 < L < 12.5 wrongly excludes the lower bound, which is a value that does round to 12.
- (c) 2 — First write 1 1/2 as an improper fraction, 3/2. To divide by 3/4, multiply by its reciprocal, 4/3: 3/2 × 4/3 = 12/6 = 2. Dropping the whole number and dividing only the fractional part, 1/2 ÷ 3/4 = 1/2 × 4/3, gives 2/3. Multiplying by 3/4 directly instead of using its reciprocal, 3/2 × 3/4, gives 9/8. Using the reciprocal of the first fraction instead of the second, 2/3 × 3/4, gives 1/2.
- (b) Yes, because 14.8 cm rounds to 15 cm to the nearest cm — Method: a recorded measurement is not an exact length; it stands for every length that rounds to it, so the two records agree if one rod can produce both. Working: Ben's record of 14.8 cm to the nearest 0.1 cm means the rod is between 14.75 cm and 14.85 cm, and 14.8 is nearer to 15 than to 14, so a rod of that length is recorded as 15 cm to the nearest centimetre. Both records can therefore come from the same rod. Answer: Yes, because 14.8 cm rounds to 15 cm to the nearest cm. The distractors: the claim that 14.8 cm rounds to 15.0 cm to 1 decimal place is false, since 14.8 cm is already written to 1 decimal place and stays 14.8 cm; the claim that it rounds to 14 cm is false, because 14.8 is 0.2 away from 15 and 0.8 away from 14; the claim that the two lengths are not the same treats each record as an exact length, when each is only a rounded record of one rod.
- (c) 6/8 — Method: two fractions can only be compared directly when they share a denominator, so rewrite 3/4 in eighths and then compare the numerators. Working: 5/8 is already in eighths, and 3/4 = (3 × 2)/(4 × 2) = 6/8. Comparing the numerators, 6 > 5, so Oliver eats the larger share. Answer: 6/8. The distractors: 5/8 comes from skipping the conversion altogether and assuming that a bar cut into eighths must give the bigger share because it has more pieces; once both shares are written over the same denominator, 5 eighths is one eighth less than 6 eighths. 1/8 comes from working out how much more Oliver eats, 6/8 − 5/8, instead of writing down the greater of the two shares. 7/8 comes from adding 4 to the numerator and 4 to the denominator of 3/4 instead of multiplying both by 2.
- (b) 9/4 — Method: write the whole part as a fraction with the same denominator, then add the fraction part to it. Working: there are 4 quarters in 1 whole, so 2 wholes are 2 × 4 = 8 quarters; adding the 1 quarter that is already there gives 8 + 1 = 9 quarters over a denominator of 4. Answer: 9/4. The distractors: 3/4 comes from adding the whole number to the numerator, as 2 + 1, instead of multiplying it by the denominator first; 7/4 comes from multiplying correctly but then subtracting the numerator, as 2 × 4 − 1; 5/4 comes from multiplying the numerator by the denominator instead of the whole number, as 1 × 4 + 1.
- (c) 9 — Method: factors come in pairs that multiply to give the number, so work through the pairs in order; a factor paired with itself is counted only once. Working: the pairs are 1 × 100, 2 × 50, 4 × 25, 5 × 20 and 10 × 10. The first four pairs give eight different factors, and the last pair adds only one more, so the factors are 1, 2, 4, 5, 10, 20, 25, 50 and 100. Answer: 9. The distractors: 10 comes from counting the pair 10 × 10 as two separate factors; 8 comes from leaving 1 out of the list, on the view that 1 is not a proper factor; 4 comes from writing 100 = 2² × 5² and multiplying the two indices together instead of adding 1 to each index first.
- (a) 2/5 — The ratio 2:3 has 2 + 3 = 5 parts in total, and the larger plot is 3 of those parts. Since the larger plot is 18 m², each part is 18 ÷ 3 = 6 m², so the total area is 5 × 6 = 30 m² and the smaller plot is 2 × 6 = 12 m². The fraction of the total area taken up by the smaller plot is 12/30, which simplifies to 2/5. Giving the fraction for the larger plot instead of the smaller one gives 3/5. Comparing the smaller plot to the larger plot instead of to the total area gives 2/3. Assuming the two plots split the area evenly, ignoring the given ratio altogether, gives 1/2.
- (c) 6 — Listing systematically: red-black, red-grey, blue-black, blue-grey, green-black, green-grey gives 6 different outfits, matching 3 × 2 = 6. 5 comes from adding the number of T-shirts and shorts instead of multiplying them. 3 comes from counting only the T-shirts. 2 comes from counting only the pairs of shorts.
Build your own mix at the worksheet builder.