Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) £800 — Rounding 38.7 to 1 significant figure gives 40, and rounding 21.40 to 1 significant figure gives 20. Multiplying the rounded values gives an estimate of 40 × 20 = £800. Rounding 21.40 to the nearest whole number instead of to 1 significant figure gives 21, and 40 × 21 = £840, one place value too fine for the price. Adding the rounded values instead of multiplying them gives 40 + 20 = £60. Rounding both numbers to 2 significant figures instead of 1, giving 39 and 21, produces 39 × 21 = £819.
- (a) 1/2 — The ratio 1:2:3 has 1 + 2 + 3 = 6 parts in total. Amir and Bo together receive 1 + 2 = 3 of those parts, so together they receive 3/6 of the £60, which simplifies to 1/2. Using only Amir's single part, 1/6, ignores Bo's share entirely. Adding Bo's and Chen's parts instead of Amir's and Bo's, 2 + 3 = 5, gives 5/6. Comparing Amir and Bo's 3 parts to Chen's 3 parts, rather than to the total of 6 parts, gives 3/3 = 1.
- (c) 0.07 — Each digit after the decimal point has a place value: the first digit is tenths, the second is hundredths, the third is thousandths. In 3.472, the 4 is in the tenths place and the 7 is in the hundredths place, so it is worth 0.07. Reading it as 7 ignores place value altogether, treating it as if it were a whole number. Reading it as 0.7 puts it one place too big, in the tenths place. Reading it as 0.007 puts it one place too small, in the thousandths place. The digit 7 in 3.472 is worth 0.07.
- (b) −2 — Method: the multiplication is carried out before the addition, and a negative multiplied by a positive is negative. Working: (−3) × 4 = −12, so the calculation becomes −12 + 10 = −2. Answer: −2. The distractors: 22 comes from ignoring the minus sign and working out 3 × 4 + 10 = 22; −42 comes from adding before multiplying, giving (4 + 10) × (−3) = 14 × (−3) = −42; −22 comes from adding 12 and 10 and then writing a minus sign in front of the total, instead of moving 10 places up from −12.
- (a) 8 — To undo 'multiply by 4, then add 8', reverse the operations in reverse order: subtract 8 first, then divide by 4. 40 − 8 = 32, and 32 ÷ 4 = 8, so the number is 8. A candidate who added 8 again instead of subtracting worked out 40 + 8 = 48, then 48 ÷ 4 = 12. A candidate who divided before subtracting, doing the inverse operations in the wrong order, worked out 40 ÷ 4 = 10, then 10 − 8 = 2. A candidate who multiplied instead of dividing at the last step worked out (40 − 8) × 4 = 32 × 4 = 128.
- (a) 1/2, 3/5, 2/3, 5/6 — Convert all four fractions to a common denominator of 30: 2/3 is 20/30, 3/5 is 18/30, 5/6 is 25/30, and 1/2 is 15/30. Ordering by these numerators, smallest to largest, gives 15/30, 18/30, 20/30, 25/30, which is 1/2, 3/5, 2/3, 5/6. Ordering by the size of the numerator in the original fractions, 1, 2, 3, 5, rather than converting to a common denominator, gives the wrong order 1/2, 2/3, 3/5, 5/6, because it ignores that the denominators are different. Ordering largest to smallest instead of smallest to largest, as the question asks, gives 5/6, 2/3, 3/5, 1/2. Using the rule "the bigger the denominator, the smaller the fraction" to place the last two, so that 5/6 is put below 2/3 because 6 is bigger than 3, gives 1/2, 3/5, 5/6, 2/3 — that rule only holds when the numerators are the same, and here 20/30 really is smaller than 25/30. So the correct order, smallest to largest, is 1/2, 3/5, 2/3, 5/6.
- (a) 2 — Method: systematically try each possible number of 20p coins, starting from one, and check whether the amount left over can be made exactly using whole 10p coins. Working: one 20p coin leaves 40p, made from four 10p coins — valid. Two 20p coins leave 20p, made from two 10p coins — valid. Three 20p coins leave 0p, which needs zero 10p coins — not valid, since at least one 10p coin is required. So there are 2 different ways. Answer: 2. 3 comes from counting the case of three 20p coins and no 10p coins as if it were allowed, even though at least one 10p coin is required. 4 comes from ignoring the 'at least one of each' condition altogether and counting every way of making 60p, including three 20p coins with no 10p coins and six 10p coins with no 20p coins. 1 comes from finding only one of the two valid combinations and stopping the systematic list too early.
- (c) 150 m — Method: a fraction acts as an operator, so finding 3/7 of a length means dividing by the denominator and multiplying by the numerator. Working: 350 ÷ 7 = 50, so one seventh of the route is 50 m, and three sevenths is 50 × 3 = 150 m. Answer: 150 m. The distractors: 50 m comes from finding one seventh and stopping there instead of multiplying by 3; 1050 m comes from multiplying by the numerator without dividing by the denominator, giving 350 × 3 = 1050; 200 m comes from working out the stretch of the route the footpath does not run alongside, which is 4/7 of 350 m, instead of the stretch it does.
- (d) −1.7 — Since the numbers have different signs, find the difference between their sizes: 4.5 − 2.8 = 1.7, then keep the sign of the number further from zero. So −4.5 + 2.8 = −1.7. A candidate who drops the negative sign gets 1.7. A candidate who adds the magnitudes instead of finding the difference gets −(4.5 + 2.8) = −7.3. A candidate who takes the smaller digit from the larger in the tenths column, doing 8 − 5 = 3 instead of borrowing to make 15 − 8 = 7, gets 2.3 and so −2.3.
- (c) 0.001 — Method: a negative index means 'one over' the positive power, so $10^{-3}$ means one over $10^{3}$. Working: ten cubed is 1000, and one over 1000 is 0.001. 1000 comes from ignoring the negative sign and working out ten cubed instead of its reciprocal. −1000 comes from ignoring what the negative index does to the size, while still writing a negative sign on the large value. −0.001 comes from correctly finding the size, 0.001, but wrongly keeping a negative sign because the index was negative. Answer: 0.001.
- (d) 8 — Method: whatever is inside the brackets is worked out first, and the multiplication is carried out afterwards. Working: inside the brackets, −3 + 7 = 4, and then 2 × 4 = 8. Answer: 8. The distractors: 1 comes from ignoring the brackets and multiplying first, giving 2 × (−3) = −6 and then −6 + 7 = 1; −20 comes from reading −3 + 7 as −(3 + 7) = −10, so that 2 × (−10) = −20; 6 comes from working the brackets out correctly and then adding the 2 instead of multiplying by it, giving 2 + 4 = 6.
- (c) > — Method: fractions with the same denominator are made of parts of the same size, so compare how many of those parts each fraction has. Working: both fractions are elevenths, and 6 elevenths is 2 more elevenths than 4 elevenths, so the fraction on the left is the larger one. The symbol must have its point facing the smaller side. Answer: >. The distractors: < comes from comparing the numerators the wrong way round, as though a larger numerator gave a smaller fraction; = comes from seeing the same denominator in both fractions and concluding that the fractions themselves are the same size; ≤ comes from working out the direction correctly but then picking the wrong symbol for it, reading it as though it meant 'is greater than or equal to'; ≤ means 'is less than or equal to', and 6 elevenths is neither less than nor equal to 4 elevenths.
- (d) 360 km — Method: first find the kilometres per litre by dividing distance by fuel used, then multiply this rate by the new tank size. Working: 180 ÷ 6 = 30 km per litre; 30 × 12 = 360 km. Answer: 360 km. 30 km comes from finding the correct fuel consumption but stopping there, without scaling it up to the full tank. 2160 km comes from multiplying the original distance (180) by the tank size (12) directly, skipping the unit rate. 90 km comes from pairing the numbers the wrong way round: dividing the distance by the new tank size, 180 ÷ 12 = 15, and then multiplying by the original 6 litres, 15 × 6 = 90.
- (a) 8.35 ≤ L < 8.45 — Method: a length rounded to 1 decimal place lies within half of 0.1 cm, that is 0.05 cm, of the value written down. The lower limit is included because it rounds up to that value, and the upper limit is excluded because it rounds up to the next value instead. Working: 8.4 − 0.05 = 8.35 and 8.4 + 0.05 = 8.45, so a length of 8.35 cm still rounds to 8.4 cm while a length of 8.45 cm rounds to 8.5 cm. Answer: 8.35 ≤ L < 8.45. The distractors: 8.3 ≤ L < 8.5 goes a whole 0.1 cm either side instead of half of it; 8.35 < L ≤ 8.45 has the two limits the wrong way round, excluding the length that does round to 8.4 cm and including the one that does not; 8.4 ≤ L < 8.5 is the interval for a length truncated to 1 decimal place, not one rounded to it.
- (c) 20 — Method: work out each power separately before subtracting. Working: 6² = 36 and 4² = 16, so 6² − 4² = 36 − 16 = 20. Answer: 20. (4 comes from subtracting first, 6 − 4 = 2, and then squaring that result, instead of squaring each number first. 52 comes from adding the two squares, 36 + 16, instead of subtracting them. 2 comes from subtracting the two numbers, 6 − 4, and forgetting to square at all.)
Build your own mix at the worksheet builder.