Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Non-calculator
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (a) 5 — Method: the number of glasses is the amount in the jug divided by the amount one glass holds. Write the mixed number as an improper fraction, then divide by multiplying by the reciprocal. Working: 3 1/3 = (3 × 3 + 1)/3 = 10/3, and 10/3 ÷ 2/3 = 10/3 × 3/2 = 30/6 = 5. Answer: 5. The distractors: 2 comes from writing 3 1/3 as 4/3, adding the whole number to the numerator instead of multiplying it by the denominator first, and then dividing 4/3 by 2/3; 20/9 comes from multiplying by 2/3 instead of dividing by it; 5/3 comes from dividing by 2 rather than by 2/3, as though each glass held 2 litres.
- (c) −5 ≤ −5 — The symbol ≤ means 'less than or equal to', and −5 is equal to −5, so this statement is true. −3 ≥ −1 is false: a candidate who ignores the negative signs and compares 3 with 1 would wrongly think −3 is the bigger number, but on the number line −3 is smaller than −1. 0.4 < 2/5 is false because 2/5 converts to exactly 0.4, so the two values are equal, not one strictly less than the other — a candidate who assumes a fraction is automatically bigger than a similar-looking decimal without converting it would miss this. 7/10 ≤ 0.6 is false because 7/10 converts to 0.7, which is bigger than 0.6; a candidate who misplaces the decimal point and converts 7/10 as 0.07 would wrongly believe this statement is true.
- (a) 4,000 nanometres — Method: the number of nanometres is the diameter divided by the length of one nanometre, and dividing powers of ten means subtracting the indices. Working: −6 − (−9) = 3, so 10⁻⁶ ÷ 10⁻⁹ = 10³, and the diameter is 4 × 10³ nanometres. Answer: 4,000 nanometres. The distractors: 400 nanometres comes from taking the difference between the indices as 2 instead of 3; 4 nanometres comes from changing the name of the unit without converting, leaving the coefficient untouched; 0.004 nanometres comes from dividing by 10³ instead of multiplying by it, as though a nanometre were the larger of the two units.
- (d) −8, −3, 0, 2, 5 — Method: place the numbers on a number line and read them from left to right. Working: the negative numbers −8 and −3 come before 0, with −8 further left than −3 because it is further from zero in the negative direction; then 0, then the positive numbers 2 and 5 in increasing size. Answer: −8, −3, 0, 2, 5. −3, −8, 0, 2, 5 swaps −3 and −8, putting the negative number closer to zero first. 5, 2, 0, −3, −8 lists the numbers from largest to smallest instead of smallest to largest. −8, −3, 2, 0, 5 puts 2 before 0, treating positive numbers as if they always come before zero.
- (b) −4 — To subtract a negative number, add its positive equivalent: −7 − (−3) becomes −7 + 3. Work out −7 + 3 to get −4. Treating "− (−3)" as simply "−3" without flipping the sign gives the wrong working −7 − 3, which is −10. Ignoring the negative sign on −7 and just subtracting the values, 7 − 3, gives 4, which loses the sign of the starting number. Flipping the sign of both numbers, 7 + 3, gives 10, which changes more than the double negative allows. So −7 − (−3) = −4.
- (b) 4 m — Blue fabric is 3 parts and this equals 1.5 m, so one part is 1.5 ÷ 3 = 0.5 m. Yellow fabric is 5 parts, so it is 5 × 0.5 = 2.5 m. The total length is 1.5 + 2.5 = 4 m. 2.5 m is the length of yellow fabric only, without adding the blue fabric back in. 1.5 m is just the given length of blue fabric, with the yellow fabric never worked out. 2.4 m comes from swapping the ratio, treating blue as 5 parts and yellow as 3 parts, giving one part as 1.5 ÷ 5 = 0.3 m and yellow as 3 × 0.3 = 0.9 m, then adding 1.5 + 0.9 = 2.4.
- (a) They cannot both be describing the same path — Jon's measurement means the true length, l, satisfies 11.5 m ≤ l < 12.5 m. Mia's measurement means the true length satisfies 12.55 m ≤ l < 12.65 m. These two ranges do not overlap, so the two measurements cannot both be describing the same path. 'They must both be describing the same path' ignores that the two ranges do not overlap at all. 'Jon's measurement must be wrong' wrongly assumes Jon is the one at fault, when the mismatch does not show which measurement, if either, is wrong. 'Mia's measurement must be wrong' makes the same unjustified assumption in the other direction.
- (c) 3.05 kg — There are 1000 g in 1 kg, so 450 g = 450 ÷ 1000 = 0.45 kg. The total mass is 0.45 + 2.6 = 3.05 kg. 7.1 kg divides the grams by 100 instead of 1000, 2.645 kg divides them by 10 000, and 452.6 kg adds the two numbers without converting the grams at all.
- (d) 6 — Method: the square root of a product can be found either by multiplying first and then rooting, or by rooting each factor and multiplying the two roots together. Working: 4 × 9 = 36, and 6 × 6 = 36, so the root is 6; the same value comes from √4 × √9 = 2 × 3. Answer: 6. The distractors: 36 comes from multiplying inside the root and then leaving the root untaken; 5 comes from rooting each factor and adding the results, 2 + 3, instead of multiplying them; 18 comes from rooting the 4 only and leaving the 9 untouched, giving 2 × 9.
- (c) 3.50 kg — Method: a mass given to the nearest kilogram lies within half a kilogram of the stated value, and a mass exactly halfway is rounded up. Working: rounding each mass to the nearest kilogram, 2.50 kg rounds up to 3 kg, 2.90 kg rounds to 3 kg and 3.49 kg rounds to 3 kg, so each of those could be the parcel; 3.50 kg is exactly halfway between 3 kg and 4 kg and so rounds up to 4 kg, which is not what the parcel was recorded as. Answer: 3.50 kg. The distractors: 2.50 kg is chosen by a candidate who rounds a value exactly halfway downwards, when the convention is to round it up; 2.90 kg is chosen by a candidate who thinks any mass below 3 kg must round down to 2 kg; 3.49 kg is chosen by a candidate who rounds twice, taking 3.49 to 3.5 first and then on to 4.
- (a) 225 — Method: brackets are worked out before powers, so multiply the two numbers first and then square the result. Working: 3 × 5 = 15, and 15² = 15 × 15 = 225. Answer: 225. The distractors: 30 comes from doubling 15 instead of squaring it; 75 comes from squaring only the 5 and then working out 3 × 25; 34 comes from squaring each number separately and adding, 9 + 25, instead of multiplying inside the brackets first.
- (a) 23 — Division undoes multiplication, so the missing number is 391 ÷ 17 = 23. Writing down 17 repeats the number already given instead of solving for the missing one. Subtracting instead of dividing gives 391 − 17 = 374. Multiplying instead of dividing gives 391 × 17 = 6647.
- (a) Fewer than 48,500 people attended — Method: a figure given to the nearest thousand lies within half of 1,000, that is 500, of the figure printed, so the attendance is at least 47,500 and below 48,500. Working: 48,000 − 500 = 47,500 and 48,000 + 500 = 48,500, and an attendance of 48,500 would have been reported as 49,000, so every possible attendance is below 48,500. Answer: Fewer than 48,500 people attended. The distractors: more than 48,500 turns the upper limit of the range into a minimum; fewer than 47,500 uses the lower limit as though it were the upper one; more than 48,000 assumes the printed figure was rounded down, when it could just as well have been rounded up from a smaller attendance.
- (b) 9/4 — Method: write the whole part as a fraction with the same denominator, then add the fraction part to it. Working: there are 4 quarters in 1 whole, so 2 wholes are 2 × 4 = 8 quarters; adding the 1 quarter that is already there gives 8 + 1 = 9 quarters over a denominator of 4. Answer: 9/4. The distractors: 3/4 comes from adding the whole number to the numerator, as 2 + 1, instead of multiplying it by the denominator first; 7/4 comes from multiplying correctly but then subtracting the numerator, as 2 × 4 − 1; 5/4 comes from multiplying the numerator by the denominator instead of the whole number, as 1 × 4 + 1.
- (d) 9 — List all the factors of 36 in pairs that multiply to give 36: 1 × 36, 2 × 18, 3 × 12, 4 × 9, and 6 × 6. This gives the factors 1, 2, 3, 4, 6, 9, 12, 18 and 36 — nine factors in total, with 6 counted only once even though it appears in a pair with itself. Forgetting that 36 is itself a factor of 36 and leaving it off the list gives 8. Counting the number of factor pairs, five of them, rather than the number of individual factors gives 5. Treating the repeated pair 6 × 6 as two separate factors, 6 and 6 again, gives 10 instead of 9. So 36 has 9 factors.
Build your own mix at the worksheet builder.