Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Answer key: Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- (d) −1.4, −6/5, 0, 5/4, 1.3 — Method: convert the fractions 5/4 and −6/5 to decimals so every number is written the same way, then compare all five decimals. Working: 5/4 = 1.25 and −6/5 = −1.2. Comparing −1.4, −1.2, 0, 1.25 and 1.3 in size gives the order −1.4, −1.2, 0, 1.25, 1.3. Answer: −1.4, −6/5, 0, 5/4, 1.3. −6/5, −1.4, 0, 5/4, 1.3 swaps the two negative numbers, treating −6/5 as more negative than −1.4 even though −1.2 is closer to zero than −1.4. 1.3, 5/4, 0, −6/5, −1.4 lists the numbers from largest to smallest instead of smallest to largest. −1.4, −6/5, 0, 1.3, 5/4 swaps 5/4 and 1.3, comparing the numerator 5 directly with 1.3 instead of converting 5/4 to the decimal 1.25 first.
- (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
- (d) 19 — 2² = 4, then 4 × 4 = 16, then 3 + 16 = 19. Adding before multiplying gives 3 + 4 = 7, then 7 × 4 = 28 — multiplication comes before addition. Squaring the product instead of just the 2 gives 4 × 2 = 8, then 8² = 64, then 3 + 64 = 67. Working strictly left to right throughout gives 3 + 4 = 7, then 7 × 2 = 14, then 14² = 196.
- (c) 0.36 — Method: convert the fraction to an equivalent fraction with denominator 100, then read off the decimal. Working: 9/25 = 36/100 (multiplying numerator and denominator by 4) = 0.36. Answer: 0.36. 2.8 comes from flipping the fraction and dividing the denominator by the numerator instead: 25 ÷ 9 = 2.77…, rounded to 2.8. 0.925 comes from writing the digits of the numerator and denominator directly after the decimal point without scaling the fraction. 0.9 comes from writing the numerator straight after the decimal point, as if the denominator were 10 rather than 25.
- (a) to the nearest centimetre — Method: the error interval of a rounded measurement runs from half a unit below the stated value to half a unit above it, so the width of the interval is one whole unit of the accuracy used. Working: the interval runs from 24.5 to 25.5, a width of 25.5 − 24.5 = 1, so the unit of accuracy is 1 cm; the stated value is the midpoint, 25 cm, and 25 correct to the nearest centimetre is exactly what gives 24.5 ≤ L < 25.5. Answer: to the nearest centimetre. To the nearest 0.5 cm comes from reading the half-unit, 0.5, as the accuracy itself instead of doubling it back to the full unit. To 1 decimal place comes from seeing the bounds written with one decimal place and taking that as the accuracy, but the bounds of a value given to 1 decimal place would be only 0.05 either side. To the nearest 10 cm comes from confusing the size of the value, about 25, with the unit it was rounded to; rounding to the nearest 10 cm would give an interval 5 cm either side of the stated value.
- (b) 6.2 ≤ x < 6.3 — Truncating simply cuts off the digits after the required decimal place instead of rounding them, so every value from 6.2 up to (but not reaching) 6.3 truncates to 6.2. This gives the error interval 6.2 ≤ x < 6.3, with no allowance made on the lower side because truncation never rounds a smaller value up into this interval. Using 6.15 ≤ x < 6.25 applies the rounding rule of going half a unit either side, which does not apply to truncation. Writing 6.1 < x ≤ 6.2 puts the interval below 6.2 instead of above it. Writing 6.2 ≤ x ≤ 6.3 wrongly includes 6.3, which truncates down to itself, not to 6.2.
- (b) No — their possible jump lengths do not overlap — Method: each recorded jump stands for the lengths within half of 0.1 m, that is 0.05 m, of the figure recorded, and Priya is right only if the two ranges overlap. Working: Priya's jump is at least 3.8 − 0.05 = 3.75 m and below 3.85 m, because a jump of 3.85 m would have been recorded as 3.9 m; Nadia's jump is at least 3.85 m and below 3.9 + 0.05 = 3.95 m. Every length Priya could have jumped is below 3.85 m and every length Nadia could have jumped is at least 3.85 m, so Nadia jumped further whatever the exact lengths were. Answer: No — their possible jump lengths do not overlap. The distractors: the reason that a recorded jump is exactly the length jumped reaches the same verdict by treating a rounded record as exact, which is the idea this question tests; both jumps being 3.85 m would put 3.85 m inside Priya's range, when a jump of that length is recorded as 3.9 m; Priya jumping up to 3.9 m goes a whole 0.1 m above her record instead of half of it.
- (c) 3.05 kg — There are 1000 g in 1 kg, so 450 g = 450 ÷ 1000 = 0.45 kg. The total mass is 0.45 + 2.6 = 3.05 kg. 7.1 kg divides the grams by 100 instead of 1000, 2.645 kg divides them by 10 000, and 452.6 kg adds the two numbers without converting the grams at all.
- (b) 5 — Method: list the factors of each number and pick the largest value that appears in both lists. Working: the factors of 15 are 1, 3, 5 and 15; the factors of 25 are 1, 5 and 25. The values in both lists are 1 and 5, and the larger of those is 5. Answer: 5. The distractors: 3 comes from choosing a factor of 15 without checking that it also divides 25; 15 comes from assuming that the smaller of the two numbers is always a factor of the larger one; 75 is the lowest common multiple of 15 and 25, given by taking the highest power of each prime instead of the lowest.
- (b) 6 — List the factors of each number: the factors of 12 are 1, 2, 3, 4, 6 and 12; the factors of 18 are 1, 2, 3, 6, 9 and 18. The common factors are 1, 2, 3 and 6, and the highest of these is 6. Picking 2, a common factor but not the largest, gives an answer that is too small. Picking 3, also a common factor but still not the largest, gives another answer that is too small. Working out the lowest common multiple instead of the highest common factor gives 36. So the highest common factor of 12 and 18 is 6.
- (c) 6 — Method: the first significant figure is the first non-zero digit; round using the digit after it to decide whether to round up or down. Working: the first significant figure of 6.283 is the 6; the next digit is 2, which rounds down, so 6.283 rounds to 6. 6.3 comes from rounding to 2 significant figures instead of 1. 10 comes from rounding up to the nearest 10 instead of finding 1 significant figure of the number itself. 0.6 comes from misplacing the decimal point after rounding. Answer: 6.
- (c) 3 × 10⁶ — Daily revenue = (4 × 10³) × 2.5 = 1 × 10⁴ (£10,000). Multiplying by the number of days, (3 × 10²), gives annual revenue = (1 × 10⁴) × (3 × 10²) = 3 × 10⁶ (£3,000,000). A candidate who forgot to multiply by the price and just multiplied the number of items by the number of days worked out (4 × 10³) × (3 × 10²) = 1.2 × 10⁶. A candidate who added the number of days to the daily revenue instead of multiplying worked out 1 × 10⁴ + 3 × 10² = 1.03 × 10⁴. A candidate who misread £2.50 as £25 worked out a daily revenue of (4 × 10³) × 25 = 1 × 10⁵, giving an annual total of (1 × 10⁵) × (3 × 10²) = 3 × 10⁷.
- (c) −5 ≤ −5 — The symbol ≤ means 'less than or equal to', and −5 is equal to −5, so this statement is true. −3 ≥ −1 is false: a candidate who ignores the negative signs and compares 3 with 1 would wrongly think −3 is the bigger number, but on the number line −3 is smaller than −1. 0.4 < 2/5 is false because 2/5 converts to exactly 0.4, so the two values are equal, not one strictly less than the other — a candidate who assumes a fraction is automatically bigger than a similar-looking decimal without converting it would miss this. 7/10 ≤ 0.6 is false because 7/10 converts to 0.7, which is bigger than 0.6; a candidate who misplaces the decimal point and converts 7/10 as 0.07 would wrongly believe this statement is true.
- (d) 1 hour 36 minutes — From 09:47 to 10:47 is exactly 1 hour, and from 10:47 to 11:23 is a further 36 minutes, so the journey takes 1 hour 36 minutes in total. Subtracting the hours and minutes separately without carrying across the hour boundary — hours 11 − 9 = 2, minutes 47 − 23 = 24, taking the smaller minute figure from the larger regardless of which time each came from — gives 2 hours 24 minutes. Carrying the hour correctly but then subtracting the minutes the wrong way round, 47 − 23 = 24 instead of 60 − 47 + 23 = 36, gives 1 hour 24 minutes. Counting an extra hour by treating 09:47 as if it were 08:47 gives 2 hours 36 minutes.
- (d) 24 km — Method: a fraction acts as an operator, so finding 8/12 of a distance means dividing by the denominator and multiplying by the numerator. Working: 36 ÷ 12 = 3, so one twelfth of the walk is 3 km, and eight twelfths is 3 × 8 = 24 km. Answer: 24 km. The distractors: 12 km comes from working out the part of the walk still left, the other four twelfths, instead of the part already completed; 288 km comes from multiplying by the numerator without dividing by the denominator, giving 36 × 8 = 288; 4.5 km comes from dividing by the numerator instead of multiplying by it, giving 36 ÷ 8 = 4.5.
Build your own mix at the worksheet builder.