Printable · GCSE Foundation · ages 14-16
Number worksheet — GCSE Foundation
Fifteen questions across the number statements at Foundation tier. Choose the non-calculator filter to rehearse Paper 1, which counts for a third of the marks.
Number worksheet — GCSE Foundation
MathsUKwww.geekhero.co.uk
- 1.Work out 1 − 1/2 − 1/4 − 1/8 − 1/16. Give your answer as a fraction.
- 2.Round 4,685 to the nearest 100.
- 3.Which of these numbers is the largest: −9, −7, −4, −2?
- 4.Work out (−2)² − 3
- 5.Write 0.0038 in standard form.
- 6.The length of a nail is 12 cm, correct to the nearest centimetre. Using L for the length of the nail in centimetres, write down the error interval for L.
- 7.A digital timer truncates every time to 1 decimal place. It shows a swimmer's time for one length as 12.3 seconds. Using t for the swimmer's actual time in seconds, write down the error interval for t.
- 8.A number, x, is truncated (not rounded) to 1 decimal place and the result is 6.2. Write down the error interval for x.
- 9.Work out (3 × 5)²
- 10.Work out (3 × 10²) × (2 × 10⁵). Give your answer in standard form.
- 11.A quantity surveyor calculates a length as 24.6851 m. Round this length to 2 decimal places.
- 12.Write down the symbol that makes this statement true: 3/10 ___ 0.3
- 13.A cake recipe needs 3/4 of a kilogram of sugar. Aisha wants to make half the recipe. Work out how much sugar she needs, giving your answer as a fraction of a kilogram in its simplest form.
- 14.A crowd of 8,400 people is recorded correct to the nearest 100. Work out the smallest possible number of people in the crowd.
- 15.The highest common factor of two numbers is 4 and their lowest common multiple is 60. One of the numbers is 20. Work out the other number.
Answer key
- (a) 1/16 — Method: terms can only be subtracted once they share a denominator, so write every term over the largest denominator, 16, and then subtract the numerators in order from left to right. Working: 1 = 16/16, 1/2 = 8/16, 1/4 = 4/16 and 1/8 = 2/16, so the numerators give 16 − 8 − 4 − 2 − 1 = 1, over a denominator of 16. Answer: 1/16. The distractors: 1/8 comes from stopping one term early, after 16 − 8 − 4 − 2 = 2; 3/16 comes from a sign slip on the last term, adding it instead of subtracting it, which gives 2 + 1 = 3; 15/16 comes from working from the right-hand end as though the last four terms were bracketed together, so that only a single sixteenth is taken away from 1.
- (b) 4,700 — To round to the nearest 100, look at the digit in the tens column, which decides whether the hundreds column rounds up or stays the same. In 4,685 that digit is 8, and since 8 is 5 or more, the 6 in the hundreds column rounds up to 7, giving 4,700. Simply changing the last two digits to zero without checking the tens digit gives 4,600, which rounds down when it should round up. Rounding to the nearest 10 instead of the nearest 100 gives 4,690. Rounding to the nearest 1,000 instead gives 5,000, one place value too coarse.
- (c) −2 — On a number line, negative numbers get smaller as their size (ignoring the sign) gets bigger, so −2 is closest to zero and is the largest of the four. A candidate who ignores the negative signs and orders the numbers as if they were positive, largest digit first, would pick −9 as the 'largest'. Continuing that same reversed ranking, the next number in digit order is −7. The number one step further along that same reversed ranking is −4, still short of the true largest value, −2.
- (b) 1 — Method: BIDMAS deals with the index before the subtraction, and a negative number multiplied by itself gives a positive result. Working: (−2)² = (−2) × (−2) = 4, so the calculation becomes 4 − 3 = 1. Answer: 1. The distractors: −7 comes from squaring only the 2 and leaving the minus sign outside the index, giving −(2²) − 3 = −4 − 3 = −7; −1 comes from subtracting the square from 3 instead of 3 from the square, giving 3 − 4 = −1; 25 comes from carrying out the subtraction before the index, giving (−2 − 3)² = (−5)² = 25.
- (a) 3.8 × 10⁻³ — 0.0038 is less than 1, so the power of 10 is negative. Moving the decimal point 3 places gives A = 3.8, so 0.0038 = 3.8 × 10⁻³. A candidate who wrote 3.8 × 10³ used a positive power, which is only correct for numbers of 10 or more. A candidate who wrote 38 × 10⁻⁴ used a value of A outside the required range. A candidate who wrote 3.8 × 10⁻⁴ counted one place too many when moving the decimal point.
- (a) 11.5 ≤ L < 12.5 — Rounding to the nearest centimetre means L can be up to half a centimetre below or above 12 before it would round to a different whole number. Half of 1 cm is 0.5 cm, so the lower bound is 12 − 0.5 = 11.5 and the upper bound is 12 + 0.5 = 12.5. A value exactly at the upper bound, 12.5, would round up to 13, not 12, so 12.5 itself is excluded, giving 11.5 ≤ L < 12.5. Writing 11.5 ≤ L ≤ 12.5 wrongly includes 12.5 on both ends. Writing 11 ≤ L < 13 uses a whole centimetre either side instead of half a centimetre. Writing 11.5 < L < 12.5 wrongly excludes the lower bound, which is a value that does round to 12.
- (c) 12.3 ≤ t < 12.4 — Method: truncating cuts the later digits off instead of rounding them, so nothing is ever pushed upwards. The displayed value is therefore the smallest the time can be, and the time can run up to, but not reach, the next value the display can show. Working: the display reads 12.3, so the actual time is at least 12.3 seconds; as soon as the time reaches 12.3 + 0.1 = 12.4 seconds the display would read 12.4, so 12.4 is not included. Answer: 12.3 ≤ t < 12.4. The distractors: 12.25 ≤ t < 12.35 is the interval for a time rounded to 1 decimal place, and this display does not round; 12.3 < t ≤ 12.4 excludes the one value the display certainly allows and includes the one it rules out; 12.3 ≤ t ≤ 12.4 treats 12.4 seconds as possible, but at 12.4 seconds the display would no longer read 12.3.
- (b) 6.2 ≤ x < 6.3 — Truncating simply cuts off the digits after the required decimal place instead of rounding them, so every value from 6.2 up to (but not reaching) 6.3 truncates to 6.2. This gives the error interval 6.2 ≤ x < 6.3, with no allowance made on the lower side because truncation never rounds a smaller value up into this interval. Using 6.15 ≤ x < 6.25 applies the rounding rule of going half a unit either side, which does not apply to truncation. Writing 6.1 < x ≤ 6.2 puts the interval below 6.2 instead of above it. Writing 6.2 ≤ x ≤ 6.3 wrongly includes 6.3, which truncates down to itself, not to 6.2.
- (a) 225 — Method: brackets are worked out before powers, so multiply the two numbers first and then square the result. Working: 3 × 5 = 15, and 15² = 15 × 15 = 225. Answer: 225. The distractors: 30 comes from doubling 15 instead of squaring it; 75 comes from squaring only the 5 and then working out 3 × 25; 34 comes from squaring each number separately and adding, 9 + 25, instead of multiplying inside the brackets first.
- (d) 6 × 10⁷ — 3 × 2 = 6, and 2 + 5 = 7, so (3 × 10²) × (2 × 10⁵) = 6 × 10⁷. Multiplying the exponents instead of adding them gives 2 × 5 = 10, so 6 × 10¹⁰. Adding the coefficients instead of multiplying them gives 3 + 2 = 5, so 5 × 10⁷. Subtracting the exponents instead of adding them gives 5 − 2 = 3, so 6 × 10³.
- (d) 24.69 — To round to 2 decimal places, look only at the third decimal digit to decide whether the second decimal digit rounds up. In 24.6851 the third decimal digit is 5, and since 5 is 5 or more, the second decimal digit rounds up from 8 to 9, giving 24.69. Rounding to 1 decimal place instead of 2 gives 24.7, one place value too coarse. Keeping the third decimal digit rather than dropping it gives 24.685, which is 3 decimal places. Looking at the fourth decimal digit, 1, instead of the third one, and wrongly deciding that no rounding is needed, leaves the length unrounded at 24.68.
- (a) = — Method: convert the fraction to a decimal so both numbers are in the same form. Working: 3/10 means 3 divided by 10, which is 0.3. Answer: 3/10 = 0.3, so the symbol is =. < comes from treating the fraction as smaller than the decimal without converting it first. > comes from the same mistake the other way round. ≠ comes from assuming a fraction and a decimal can never be equal.
- (d) 3/8 — Method: making half the recipe means dividing the quantity of sugar by 2. Working: 3/4 ÷ 2 = 3/8. Answer: 3/8. 3/2 comes from multiplying by 2 instead of dividing, as if doubling the recipe. 5/4 comes from adding 1/2 to 3/4 instead of halving it, confusing "half of" with "plus a half". 3/4 comes from leaving the amount unchanged, forgetting to halve it for the smaller recipe.
- (a) 8,350 — Rounding to the nearest 100 means the true number can be up to half of 100, which is 50, below the recorded figure before it would round down to a lower hundred. The smallest possible number is therefore 8,400 − 50 = 8,350. Adding 50 instead of subtracting it gives 8,450, which is the upper end of the interval rather than the smallest value, and 8,450 is not itself possible because it would round up to 8,500. Subtracting a whole 100 instead of half of it gives 8,300, going too far below the recorded value. Subtracting 10 instead of half of the rounding unit gives 8,390, treating the rounding unit as 100 but the tolerance as only 10.
- (a) 12 — Method: for any two numbers, their highest common factor multiplied by their lowest common multiple equals the product of the two numbers. This holds because the HCF collects every prime factor the two numbers share, and the LCM collects every prime factor that appears in either number, so between them they use each prime factor of the two numbers exactly once — the same primes as the product. Working: 4 × 60 = 240, and 240 ÷ 20 = 12. 15 comes from working out 60 ÷ 4 = 15, dividing the wrong pair of numbers. 16 comes from working out 20 − 4 = 16, subtracting the highest common factor instead of using the product rule. 240 is 4 × 60, the product of the highest common factor and the lowest common multiple, left un-divided by 20. Answer: 12.
Build your own mix at the worksheet builder.